BMS (Battery Management System)
BMS (Battery Management System)
Rs. 40.00
Rs. 19.00
Type-C TP4056 Lithium Battery Charger Module with Protection 5V 1A 18650 Battery
Very High Quality PCB In built Protection to save your costly battery for overcharging In built protection for short circuit Micro usb for easy charging from any android mobile charger Best for arduino,DIY Kits,Power bank ,portable projects etc TP4056 1A...
Rs. 40.00
Rs. 19.00
5V Micro single USB DIY Step Up Power Bank Charging Module
Make your own 5V (Approx) power bank from single-cell Li-po or Li-ion battery (18650 or 14500) with this Booster and Charger Power Bank Module. It is based on 134N3P IC.It comes with UBS A Receptor at one side (output) and...
Rs. 80.00
Rs. 39.00
BMS 2S 3A 7.4V 18650 Li-ion Lithium Battery Protection Board
Over charge voltage:4.25-4.35v±0.05v Over dishcarge voltage: 2.3-3.0v±0.05v Max continuous current:3A Max peak current:5A Working temperature:-40---+50 Storage Temperature:-40-- +80 Small current:less than 3uA Life cycle :more than 50000hours Resistance:Less than 45m Short cut protection :Protectable,charge can...
Rs. 80.00
Rs. 39.00
Rs. 250.00
Rs. 129.00
Dual USB 5V 2A Power Bank Charging Module / Charging Circuit Board / Step Up Boost Power Supply Module
With a torch LED lamp (long press power button to turn ON or OFF) Module has multiple safety circuits Output voltage and current is stable, to protect USB devices during charging Module has protection from overcharge,overdischarge,short circuit and no need...
Rs. 250.00
Rs. 129.00
Type-C USB 5V 2A Battery Power Bank Charging Discharging Boost Module
Specifications: Input voltage range: 5 ~ 5.5V Charging cut-off voltage: (4.2v/4.35v) ± 0.5% Charging current: 2.4a ± 5% Boost output voltage: 5V ~ 5.15v (line loss compensation) Boost output voltage ripple: 100mV Boost output current: 2A Boost conversion efficiency: 92.5%...
Rs. 150.00
Rs. 79.00
Rs. 200.00
Rs. 99.00
BMS 3S 10A 11.1V 18650 Lithium Battery Overcharge And Over-current Protection board
Three series of lithium battery protection board. Automatically cancel protection after protection conditions restore. Suitable for lithium battery pack of 11.1V, 12V, 12.6V. Quiescent current < 30uA, so power consumption is small. With the function of overcharge protection, over discharge...
Rs. 200.00
Rs. 99.00
BMS 3s 20A 18650 Lithium Battery Protection Board
Battery protection board, as the name suggests battery protection board is mainly rechargeable (Refers to the lithium battery) and protects the integrated circuit board. As the lithium battery, its material determines itself cannot be overcharge, over-discharge, short circuit, ultra-high temperature...
Rs. 199.00
Rs. 99.00
Power Distribution Battery Board for Quadcopter Multi-Axis Model
These boards are great for smaller multirotor builds. They're compact and lightweight, and offer large solder pads - making them easy to work with. Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing) Material: glass fiber Can...
Rs. 120.00
BMS 3S 40A 18650 Lithium Battery Protection Board
3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery) Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery) Continuous discharge current (upper limit): 40A (if the cooling environment is not...
Rs. 200.00
Rs. 99.00
Rs. 50.00
Rs. 25.00
Micro USB TP4056 with current Protection 1A Li-Ion Lithium Battery Charging Module
Dimension: 25 x 19 x 10 (LxWxH)mm. Input interface: micro USB. Current Protection: Yes Charging mode: Linear charging. Current: 1A adjustable. Charge precision: 1.5%. Input voltage: 4.5V-5.5V. Full charge voltage: 4.2V. Note: This Product is available in two different variants...
Rs. 50.00
Rs. 25.00
BMS 2S 20A 18650 7.4V Lithium Battery Protection Board HX-2S-D20
BMS (Battery Management System) – a battery management system that is designed to monitor the status of batteries, control the process of charging/discharging the battery, etc. Two batteries (18650) can be connected simultaneously to the HX-2S-D20 charge-discharge controller module. The module...
Rs. 170.00
Rs. 99.00
Rs. 320.00
Rs. 269.00
KA2284 Level Indicator DC3.5V-12V Module Battery Indicator Audio Level Indicator AC DC al Adjustable
The amplitude of the level can be adjusted AC and DC signals can be controlled by jumpers. Supply voltage: 3.5V-12V PCB board size: 29mm*21mm*10mm/1.14*0.82*0.39''--KA2284 Power Level Indicator Battery Indicator Pro Audio Level Indicator Module Board Feature: The amplitude of the...
Rs. 320.00
Rs. 269.00
BMS 3S 5A 12.6v 8.4v 4.2v 18650 26650 Lithium Battery Protection Board
The 3 Series 5A 18650 Lithium Battery Protection Board 11.1V/12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 5A, 100mA balanced...
Rs. 200.00
Rs. 99.00
BMS 2S 10A 18650 7.4V-8.4V Lithium Battery Protection Board
Upper working current: 10A Operating temperature: - 40 - 50°C Upper limit instantaneous current: 15A Storage conditions: -40 - 80°C Quiescent current: less than 10uA Effective life: more than 50,000 hours Internal resistance: less than 300mΩ Charging voltage: 8.4V-9V Pin...
Rs. 120.00
Rs. 69.00
BMS 3S 25A 18650 Lithium Battery Protection Board
Operating current: 0 – 25A.
Instantaneous current: 35 – 40A.
Storage condition: -40 – +80℃.
Quiescent current: less than 30uA.
Balance current: about 40 – 50mA.
Effective life: more than 30000 hours.
Rs. 350.00
Rs. 169.00
BMS 4S 40A 18650 Lithium Battery Protection Board
The Successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 cannot start the drill!!) Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit. Package Includes:1 x 4...
Rs. 600.00
Rs. 199.00
Rs. 460.00
Rs. 199.00
BMS 4S 30A 14.8V with Cable Li-ion Lithium Battery Protection Board PCB Protection Board
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable, a Balance Board for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides continuous discharge of 30A,...
Rs. 460.00
Rs. 199.00
Rs. 300.00
Rs. 159.00
BMS 4S 5A 18650 Li-ion Lithium Battery Protection Board 4.25-4.35V to 2.3-3.0V with Over Protection
-Charge voltage range: 4.25-4.35v ± 0.05v Over-discharge -voltage range: 2.3-3.0 v ± 0.05 v -Operating temperature: -40 + 50 c -life: more than 50,000 hours -Maximum operating current: 4-5 a Overcharge, overdischarge, overcurrent, short circuit protection, For a variety of...
Rs. 300.00
Rs. 159.00
Mini USB TP4056 1A Li-ion Lithium Battery Charging Module (without Protection)
Item type: Tp4056 1a li-ion lithium battery charging module charging board charger tp 4056 - mini usb Package content: 1 tp4056 1a li-ion lithium battery charging module charging board. Tp4056 1a li-ion lithium battery charging module charging board charger tp...
Rs. 70.00
Rs. 15.00
Rs. 650.00
Rs. 389.00
ESC Power Distribution Board Soldered XT60 Plug & 3.5mm Banana Bullet Connectors for Multicopter FPV
Features: Can connect 1-8 ESC. Compact, Lightweight, and offer large solder pads Easy to work with quadcopters, hexacopters, and also for octocopters. An XT60 Connector to connect a battery. This Distribution board has 8 number of the channel to connect...
Rs. 650.00
Rs. 389.00
BMS 3s 20A 18650 (HXYP-3S-BQ20) Lithium Battery Protection Board
Model - HXYP-3S-BM20 Charging voltage(V) - 12.6V-13.6V Over-Discharge recovery voltage - 3±0.05V Over Discharge Delay Time(ms) - 150 Maximum Working Current(A) - 20 Maximum Peak Current(A) - 30 Length (mm) - 65 Width (mm) - 47 Height (mm) - 10 Weight (gm) - 12 Battery protection board, as the...
Rs. 350.00
Rs. 239.00
BMS 6S 12A Lithium Battery Protection Board
PCB BMS 6 Series 22V 18650 Lithium Battery Protection Board is a 6 string 22V circuit power tool mostly used for solar lighting, for dedicated 18650 battery packs. It is designed for 3.7V 18650 models lithium batteries for charging, Protection...
Rs. 550.00
Rs. 259.00
BMS 1S 4.5A 3.7V 3MOS 18650 Lithium Battery Protection Board
1S 4.5A Battery Protection System Over voltage: 4.25 ± 0.05v Over-discharge voltage: 4.23 ± 0.05v Over-voltage: 2.54 ± 0.1V Maximum continuous electricity charge/discharge current: 4.5A Maximum discharge current: 5A Battery protection board, as the name suggests battery protection board is...
Rs. 70.00
Rs. 48.00
Mini USB TP4056 1A Li-ion Lithium Battery Charging Module (with Protection)
Input interface: Mini USB.
Current: 1A adjustable.
Charge precision: 1.5%.
Input voltage: 4.5V-5.2V.
Full charge voltage: 4.2V.
Battery over-current protection: 3 A
The battery Undervoltage protection: 2.5 V
Rs. 70.00
Rs. 32.00
Showing 1 - 24 of 30 total