IIC / I2C Module for LCD Serial Interface Adapter Module
  Operating Voltage: 5V Backlight and Contrast is adjusted by potentiometer Serial I2C control of LCD display using PCF8574 Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable Compatible for 16x2, 20x4 LCD...
Rs. 150.00 Rs. 69.00
Add to wishlist
FT232 FTDI USB to TTL Serial Converter Adapter Module - USB to UART
Chip: FT232RL. Draw out all signal port of FT232RL chip. Standard interface, compatible with a variety of official Arduino controller RXD / TXD transceiver communication indicator USB power supply, can choose 5V or 3.3V, set by jumper With over current...
Rs. 350.00 Rs. 199.00
Add to wishlist
Micro SD Storage Board / Micro SD Card Reader Module
The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface--Micro SD Card Reader Module also called Micro SD Adaptor is...
Rs. 199.00 Rs. 129.00
Add to wishlist
CP2102 USB to TTL USB UART Module Serial Converter
1. Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini.2. Original FTDI FT232 chip, stable performance.3. USB power has current protection, using 500MA self-restore fuse.4. RXD/TXD transceiver communication indicator.5. With power, sending, receiving indicator, working...
Rs. 250.00 Rs. 189.00
Add to wishlist
CP2102 (6-pin) USB 2.0 to TTL UART serial converter
  Brand new and high quality Included USB transceiver, without external circuit device With 3.3V and 5V dual power output Meets the USB2.0 specification requirements The supported data format is 8 data bits, 1 stop bit and parity bits --...
Rs. 280.00 Rs. 199.00
Add to wishlist
RS232 D-SUB DB9 Male Adapter to Terminal Connector Screw PBT Signal Module
Male DB9 RS232 connector with Captive Screws Screw terminal for all 9 pins Screw terminal suitable for wire size from 0.05mm2 (30awg) to 2.0mm2 (14awg) Use for prototyping or permanent installation--MALE DB9 adapter / breakout board with 9 pins connected...
Rs. 300.00 Rs. 230.00
RS232 D-SUB DB9 Female Adapter to Terminal Connector Signal Module
  Db9 female adapter plate signal module, RS232 serial DB9 9-pin to 4+5 positions screw terminal block. Connectordb9 adapter terminals to facilitate the project, site commissioning equipment. The screw terminal block wire range is 24-12awg, and the pitch is 5....
Rs. 299.00
Add to wishlist
RS232 to TTL Serial Interface Module
IC Chip: MAX3232 Operating Voltage: 3.3-5.5V It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU Pre-assembled compact size board Suitable for use with most microcontrollers Operates up to 250 kbit/s This RS232 to...
Rs. 200.00 Rs. 69.00
Add to wishlist
USB to TTL Auto Converter Adapter Module CH340G
Resettable fuse with 500mA 3.3V / 5V real switchable 3.3V comes with the transformer Green Data reception mentioning an indicator Multifunction CTS access products Dual protection circuit Full-function pins 5P Blue power indicator -- This is CH340G USB to RS232...
Rs. 250.00 Rs. 149.00
USB to UART / ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip
Driver Chip: CH340G Supports all basic windows versions. The adapter plate integrated 1000μF solid capacitors to ensure the current supply The power supply will not be a problem to make WIFI module crashes unresponsive. Using 3225 SMD crystal oscillator, improve the...
Rs. 300.00 Rs. 149.00
Add to wishlist
PL2303-USB to TTL Serial UART Converter Module
Applications of PL2303 USB to TTL USB Converter Module:- All kinds of satellites set-top box upgrade Router, HDD, ADSL, broadband modem firmware upgrade or cracked upgrade Burn write STC MCU, NXP MCU, Renesas MCU, NEC MCU and so on USB...
Rs. 200.00 Rs. 99.00
Add to wishlist
USB to RS485 Converter Adapter
Fully compliant USB 2.0 standard, backward compatible with USB1.1 Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive Baud Rate Range: 75bps – 115200bps, up to 6Mbps Supports Plug, Play and hot-swap ( USB side) Better than using CH341D chip or similar chip to support the laptop USB port. Communication distance up to 1.2KM --   The USB to RS485 Converter Adapter module support WIN7 XP Vista Linux Mac OS  provides an easy to use RS485 interface by means of a Virtual Com Port on the user’s...
Rs. 129.00
Add to wishlist
MAX485 TTL To RS485
Rs. 120.00 Rs. 69.00
MAX485 TTL To RS485
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. A low power consumption for the RS-485 communication Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. Slew-rate limited transceiver All pins of...
Rs. 120.00 Rs. 69.00
Add to wishlist
4 Power Indicator Battery Level Detection Module
4 Power Indicator Battery Detection Module has a high precision voltage detection chip. 4 ranks LED light indicator to show different electric quantities including red, yellow, yellow, green, respectively represent 20%, 50%, 80%, 100%. A testing Interface and two installing holes for...
Rs. 180.00 Rs. 159.00
Add to wishlist
USB ASP AVR Programming Device (AT89S51/52 IC Programmer)for ATMEL Processors
Compatible Chips: ATMega Series Tiny Series Classic Series CAN Series PWM Series--The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processors simply consists of...
Rs. 499.00
3.3v Power supply Module
Rs. 200.00 Rs. 159.00
3.3v Power supply Module
One Channel input: DC 12V Triple Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current must not exceed 800ma), 12V (12V input directly to the output) Specially designed two pin mounting holes, can be directly...
Rs. 200.00 Rs. 159.00
TJA1050 CAN Controller Bus Driver Interface Module
Onboard TJA1050 CAN controller interface chip Chip commonly used pin has led, convenient connection to use Pin 5 v to the power supply PCB board size: 22 (mm) x11.5 (mm) Fully compatible with the ISO 11898 standard High speed (up...
Rs. 210.00 Rs. 99.00
Add to wishlist
Cp2102 6-in-1 Multi-Function Serial Port Module, USB-TTL 485, 232, Bidirectional Conversion, Compatible with 3.3v/5v level
Specifications: Functionality: Multi-function serial port module Interface: USB-TTL 485 232 Conversion: Bidirectional (Supports both sending and receiving) Compatibility: Compatible with 3.3V and 5V logic levels Chipset: CP2102 Number of Ports: 6 (provides flexibility in connecting various devices) Applications: UART communication,...
Rs. 550.00 Rs. 399.00
Add to wishlist
SD Card Reading Writing Module for Arduino
All SD SPI pins output, MOSI, SCK, MISO, and CS. Support 5V/3.3V input. This module can handle 2GB SD cards. Size:4.7 x 3.1 cm. LED indicator. SD Card Holder. Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is...
Rs. 220.00 Rs. 109.00
Add to wishlist
AD7705 Dual Channel 16 bit ADC Data Acquisition Module SPI Precise TM 7705
AD7705 Dual 16-bit ADC data acquisition module Data collection is very stable, the real effective 16 words. 3.3V or 5.0V DC power supply MCU interface: SPI the chip with programmable gain amplifier, the gain range: 1-128 times--1. AD7705 Dual 16-bit...
Rs. 600.00 Rs. 499.00
You have successfully subscribed!
This email has been registered