Collection: Spacers & Standoffs

M3 hex spacers and standoffs in nylon, brass and metal, from 6mm to 60mm. They hold a PCB above a base, stack two boards, or mount a board in an enclosure or drone frame.

  • Female to female: an M3 screw goes in from each end
  • Male to female: screws through the board or into another spacer, so they can be stacked
  • Nylon: light and insulated, safe next to live tracks
  • Brass and metal: stiffer, for heavier boards and robot decks

Works with: M3 screws and nuts in Screws, Nuts & Washers.

Tip: tighten nylon standoffs by hand only; too much force strips the thread.

Spacers & Standoffs

About Spacers & Standoffs

M3 hex spacers and standoffs in nylon, brass and metal, from 6mm to 60mm. They hold a PCB above a base, stack two boards, or mount a board in an enclosure or drone frame.

  • Female to female: an M3 screw goes in from each end
  • Male to female: screws through the board or into another spacer, so they can be stacked
  • Nylon: light and insulated, safe next to live tracks
  • Brass and metal: stiffer, for heavier boards and robot decks

Works with: M3 screws and nuts in Screws, Nuts & Washers.

Tip: tighten nylon standoffs by hand only; too much force strips the thread.