I2C Module for LCD
Rs. 150.00 Rs. 120.00
I2C Module for LCD
  Operating Voltage: 5V Backlight and Contrast is adjusted by potentiometer Serial I2C control of LCD display using PCF8574 Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable Compatible for 16x2, 20x4 LCD...
Rs. 150.00 Rs. 120.00
Add to wishlist
5V 1Ch 10A Relay Module
Rs. 85.00 Rs. 65.00
5V 1Ch 10A Relay Module
Operating Voltage: 5 volts Max current: 20 mA Relay Type:- 1 Channel Load: 250V 10A AC -- Operating voltage: DC 5V; Trigger current: 5mA; Normally open interface maximum load: AC 250V/10A, DC 30V/10A. Trigger Type: Low = ground level =...
Rs. 85.00 Rs. 65.00
Add to wishlist
LM2596 3A Buck Converter Power Supply Module
This is a DC-DC step-down buck converter power supply module based on the LM2596 Buck Converter IC. Most of the sensors, Development Boards like Arduino, Raspberry Pi, and PIC Controllers work on either 5V or 3.3V, most commonly available battery we have with...
Rs. 119.00 Rs. 89.00
Add to wishlist
5V 2Ch 10A Relay Module
Rs. 150.00 Rs. 110.00
5V 2Ch 10A Relay Module
2 independently controlled relays Switch AC up to 125/250VAC @ 10A Switch DC up to 15VDC @ 10A Normally Open (NO) and Normally Closed (NC) contacts LED indicators when relays are energized 5V logic compatible--The Relay Module 5V x 2...
Rs. 150.00 Rs. 110.00
Add to wishlist
Joystick Module For Arduino And Devices
Dual-axis xy joystick module For arduino for other devices Package content: dualaxis xy joystick module for arduino and devices--Dual axis xy, joystick module, for arduino and other devices. Our brand provides you with the products which are made from quality...
Rs. 99.00 Rs. 69.00
Add to wishlist
Colour Flashing RGB 3 color SMD LED module
1) Use 5050 full color LED.2) RGB three primary color connected to the current limiting resistor to prevent burnout.3) Adjust the three primary colors by PWM to get different colors.4) Can interface with various microcontrollers.5) Working voltage: 5V.6) LED drive...
Rs. 120.00 Rs. 49.00
Add to wishlist
NC Magnetic Reed Switch Normally Closed N-C
Contacts hermetically sealed for long life. Zero power consumption. Suitable for DC and AC circuits. Mounting holes included. -- Switch Type: NC, circuit is opened when magnet is near the switch .The reed switch is an electrical switch operated by...
Rs. 250.00 Rs. 215.00
5V 4Ch 10A Relay Module with Optocoupler
Channel: 4 channel Relay Operating Voltage: 3.3V to 5V Triode drive, increasing relay coil High impedance controller pin It is 4 Channel Isolated 5V 10A Relay Module, A wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so...
Rs. 250.00 Rs. 219.00
Add to wishlist
5V DPDT Relay 8 Pin PCB Type
Rs. 45.00 Rs. 36.00
5V DPDT Relay 8 Pin PCB Type
[HFD27/005V-S 2A 30VDC 1A 125VAC--Single channel simple magnetic relay for PCB mount. this module is in line with international safety standard, control areas and load area have the isolation groove; blue KF301 terminal line more convenient. USES the loose quality...
Rs. 45.00 Rs. 36.00
Add to wishlist
5V 7A Relay 5 PIN Sugar Cube PCB Mount
-- Single channel simple magnetic relay for PCB mount. this module is in line with international safety standard, control areas and load area have the isolation groove; blue KF301 terminal line more convenient. USES the loose quality goods relay; dc...
Rs. 32.00 Rs. 24.00
Add to wishlist
12V 10A 1 CHANNEL RF Wireless Remote Control Switch Relay Module
Operating Voltage: DC12V Transmitting Frequency: 315MHz Transmission Distance: 80M (Open field) Firing Range: 100meter Package Included: 1 x Remote Control Transmitter 1 x Receiver Board--Shock Resistance: 4.7m Receiver Board: Operating Voltage: DC12V Operating Frequency: 315MHz Encoding Type: Learning Code Max...
Rs. 550.00 Rs. 449.00
Add to wishlist
4 Channel LLC I2C Logic Level Converter Bi-Directional Module 5V to 3. 3V
Number of Channels: 4 Voltage on Lx Side: 1.8V-5V Voltage on Hx Side: 2.8V-6V Power: 2.8V - 6V Conversion Method: MOSFET Based (without signal inversion)--4 CHANNEL IIC I2C LOGIC LEVEL CONVERTER BI-DIRECTIONAL 5V to 3.3V f you've ever tried to...
Rs. 120.00 Rs. 99.00
Add to wishlist
XL 6009 DC-DC Adjustable Step up Boost Converter Module
Product type: XL6009 Module Module function: DC Step up module, voltage booster, power converter Dimensions: 45 mm x 22 mm Package contains: 1 piece of packedXL6009 voltage booster regulator module XL6009 module is a type of regulator with a wide...
Rs. 120.00 Rs. 95.00
Add to wishlist
6V 7A Relay 5 PIN Sugar Cube PCB Mount
-- Single channel simple magnetic relay for PCB mount. this module is in line with international safety standard, control areas and load area have the isolation groove; blue KF301 terminal line more convenient. USES the loose quality goods relay; dc...
Rs. 25.00 Rs. 20.00
Add to wishlist
FT232 FTDI USB to TTL Serial Converter Adapter Module - USB to UART
Chip: FT232RL. Draw out all signal port of FT232RL chip. Standard interface, compatible with a variety of official Arduino controller RXD / TXD transceiver communication indicator USB power supply, can choose 5V or 3.3V, set by jumper With over current...
Rs. 350.00 Rs. 199.00
Add to wishlist
Voltage Frequency Converter 0-10V to 0-10KHz Conversion Module
Technical Parameters: Working voltage: 13.5V-30V. Input controllable voltage range: 0-10V. Output frequency range: 0-10KHz. --   Overview: The voltage to frequency module LM331_V2F is a module that can generate different frequencies depending on the input voltage. It is capable of...
Rs. 750.00 Rs. 699.00
Add to wishlist
CP2102 (6-pin) USB 2.0 to TTL UART serial converter
  Brand new and high quality Included USB transceiver, without external circuit device With 3.3V and 5V dual power output Meets the USB2.0 specification requirements The supported data format is 8 data bits, 1 stop bit and parity bits --...
Rs. 280.00 Rs. 199.00
Add to wishlist
DS3231 AT24C32 IIC Precision RTC
1 Hz output pin SQW. 32 KHz output pin 32K. Voltage Supply: 2.2 V ~ 5.5 V (for RTC). Time Format: HH: MM: SS (12/24 hr). Date Format: YY-MM-DD-dd. DS 3231 based RTC with 2032 Battery Holder. DS3231 is a...
Rs. 350.00 Rs. 249.00
Add to wishlist
52mm 2 Pin Reed Switch Sensor Magnetic Switch NO SPST
  Reed Switch/Sensor - Magnetic Switch - 52mm Reed Switch is a sensor that closes the circuit in presence of the magnetic field. It is a passive electronic switching component used to control the flow of electricity in a circuit....
Rs. 300.00 Rs. 199.00
Add to wishlist
3 USB Power Bank Charger Module
Rs. 180.00 Rs. 149.00
3 USB Power Bank Charger Module
This is a DIY Triple USB Power Bank Module for all rechargeable lithium batteries with a voltage range of 3.7V to 4.2V, such as mobile phone batteries, flat batteries, 18650 batteries, and so on. It could be connected to a...
Rs. 180.00 Rs. 149.00
Add to wishlist
12V 1Ch 10A Relay Module
Rs. 90.00 Rs. 65.00
12V 1Ch 10A Relay Module
Brand new and high quality. 1-Channel Relay interface board, Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM) --This is...
Rs. 90.00 Rs. 65.00
Add to wishlist
MT3608 2A Max DC-DC Step Up Power Module Booster
100% Quality Tested before Dispatch Maximum Output Current: 2A Input voltage: 2V - 24V Maximum Output Voltage: 28V (Exceeding this will burn the IC) Efficiency: >90% -- The MT3608 is a constant frequency, current mode step-up converter intended for small,...
Rs. 99.00 Rs. 79.00
Add to wishlist
Micro SD Storage Board / Micro SD Card Reader Module
The level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface--Micro SD Card Reader Module also called Micro SD Adaptor is...
Rs. 199.00 Rs. 129.00
Add to wishlist
150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply
Input voltage :10-32V Output voltage: 12-35V (adjustable) Output Current: 10A (MAX) Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A) The non-isolated step-up power conversion module Onboard LED illuminates when the voltage is applied to the module...
Rs. 280.00 Rs. 249.00
Add to wishlist

Showing 1 - 24 of 169 total

You have successfully subscribed!
This email has been registered