SMPS & Power Adapter
SMPS & Power Adapter
EXP-PRO 12V 2A AC-DC SMPS POWER ADAPTOR
Output – 12V/2A, ( DC Pin ) Input – 90-270 Volt, 50/60 Hz, AC Short Circuit and Overload Protection High Efficiency and Low Energy Consumption Plug Type - DC Pin, Compatible with type D socket( standard wall socket of India)...
Rs. 300.00
Rs. 199.00
NP TECH 12v 2a Smart Power Adapter
Make: NP-TECH Output – 12V/2A, (Output Pin: DC+ Sony Pin) Input – 100 – 240 Volt AC, 50/60 Hz, Short Circuit and Overload Protection High Efficiency and Low Energy Consumption Plug Type - 2 Pin, Compatible with type D socket(...
Rs. 499.00
Rs. 199.00
5V 2A DC Power Supply Adapter (SMPS Based, DC Pin)
Excellent Quality Short Circuit, Over Voltage & Over Current Protection Incredibly Low Fault Rates No Minimum Load This power supply is a regulated Center Positive power supply It's plug design is for Indian power socket so, no plug converter is...
Rs. 450.00
Rs. 249.00
EXP-PRO 12V 1A AC-DC SMPS POWER ADAPTOR
Output – 12V/1A, ( DC Pin ) Input – 90-270 Volt, 50/60 Hz, AC Short Circuit and Overload Protection High Efficiency and Low Energy Consumption Plug Type - DC Pin, Compatible with type D socket( standard wall socket of India)...
Rs. 250.00
Rs. 149.00
5V 1A DC SMPS Power Supply Adapter (DC Pin)
This is a durable product with a 6-month warranty. The adapter is easy to use. It comes with a long wire. Wide input voltage range (100VAC-280VAC). Very low no-load power consumption. Very low ripple & noise output for device safety....
Rs. 160.00
Rs. 149.00
Official USB - C 15.3W Power Supply For Raspberry Pi - Black
Good Quality material 96-230Vac operating input range 50,000 hours MTBF Input Current: 0.5A maximum Input Power consumption (no load): 0.075W maximum USB-C connection goes straight into your Raspberry Pi The Official USB type C 15.3W Power Supply For Raspberry Pi 4...
Rs. 900.00
Rs. 739.00
Official USB C 15.3W Power Supply For Raspberry Pi - White
Good Quality material 96-230Vac operating input range 50,000 hours MTBF 6-month warranty. Input Current: 0.5A maximum Input Power consumption (no load): 0.075W maximum USB-C connection goes straight into your Raspberry Pi The Official USB type C 15.3W Power Supply For Raspberry...
Rs. 900.00
Rs. 749.00
14V 1.7A SMPS Based 12v LEAD ACID Battery Charger Robo Plus
Output Voltage: 14 V
Charge Current :1.7 Amp
Input Voltage: AC 100 - 300 V, 50-60 HZ
Color: Black
LED Instruction:
Red Light Charging
Green Light Full Charge
Blue Light Reverse Battery
Note: Lead- Acid Battery Specific
Rs. 500.00
Rs. 369.00
EXP-PRO 5V 1A AC-DC SMPS POWER ADAPTOR
Output – 5V/1A, ( DC Pin ) Input – 90-270 Volt, 50/60 Hz, AC Short Circuit and Overload Protection High Efficiency and Low Energy Consumption Plug Type - DC Pin, Compatible with type D socket( standard wall socket of India)...
Rs. 250.00
Rs. 149.00
12V 1A AC-DC SMPS POWER ADAPTER Robo Plus
Output – 12V/1A, (Output Pin: DC Pin + Sony Pin) Input – 110 – 260 Volt AC, 50/60 Hz, 150 mA Short Circuit and Overload Protection High Efficiency and Low Energy Consumption Plug Type - 2 Pin, Compatible with...
Rs. 150.00
Rs. 125.00
EXP-PRO 5V 2A AC-DC SMPS POWER ADAPTOR
Output – 5V/2A, ( DC Pin ) Input – 90-270 Volt, 50/60 Hz, AC Short Circuit and Overload Protection High Efficiency and Low Energy Consumption Plug Type - DC Pin, Compatible with type D socket( standard wall socket of India)...
Rs. 350.00
Rs. 249.00
5V 5A SMPS Power Supply
Specification:- Power:- 25W Type:- AC to DC Input Voltage:- 110-220 AC, 50/60Hz Output Voltage:- 5V DC Output Current:- 5amp Output voltage: Adjustment Eange: ±20% Protections: Overload / Over Voltage / Short Circuit Description:- The input voltage: AC 100V/240V, the output current:...
Rs. 599.00
Rs. 369.00
12V 2A LED Driver AC Adapter Sunpower
* Widely used in Industrial automation, LED display, communications, etc. * High reliability. * 100% full-load burn-in test. * Soft-start current can reduce the AC input impact effetely. * High efficiency and low operation temperature. Input voltage: AC 220-3000V Output...
Rs. 100.00
Rs. 65.00
12V 5A SMPS Power Supply
Input Voltage: AC 100 - 264V 50 / 60Hz Output Voltage: 12V DC, 5A, and 60W Output voltage: Adjustment Eange: ±20% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal AC input / Full range 100% Full...
Rs. 899.00
Rs. 579.00
Rs. 699.00
Rs. 549.00
Portronics POR-1963 Adapto One Pro 18w 3A Mach USB Fast Charging Adaptor with 1 M Type C Charging Cable
18-watt Mach Single USB Port Charger: Portronics Adapto One Pro is a 3.0A Charger that charges up to 4 times faster than standard chargers. This adapter converts 240V AC wall output up to 3A single USB output. Smart Protection Chip:...
Rs. 699.00
Rs. 549.00
Official Raspberry Pi 5 Active Cooler
Original Raspberry Pi Product. Temperature-Controlled Fan, Delivers up to 1.4CFM of Air Flow. Comes With Aluminium Heat Sink Compatible With the Official Raspberry Pi 5 Case. The Official Raspberry Pi 5 Active Cooler provides an alternative cooling solution for users...
Rs. 850.00
Rs. 499.00
NP TECH 5v 2a Smart AC-DC Power Adapter
Make: NP-TECH Output – 5V/2A, (Output Pin: DC+ Sony Pin) Input – 100 – 240 Volt AC, 50/60 Hz, Short Circuit and Overload Protection High Efficiency and Low Energy Consumption Plug Type - 2 Pin, Compatible with type D socket(...
Rs. 499.00
Rs. 199.00
12V 10A SMPS Power Supply
Product Description Power Supply S-120-12 is a reliable, compact power supply unit with an output of 12V DC and a maximum power of 120W. It's designed for various applications, including LED lighting and industrial control, featuring high efficiency, stability, and...
Rs. 999.00
Rs. 669.00
9V 1A DC Power Supply Adapter
9 Volt 1 Amp Power Adapter takes an AC INPUT of 100-240V and gives 9V 1A DC output Features:- Excellent Quality Short Circuit, Over Voltage & Over Current Protection Incredibly Low Fault Rates No Minimum Load This power supply is a regulated...
Rs. 200.00
Rs. 170.00
12V 20A SMPS Power Supply
Power Supply for 3D Printer,12 VOLTS SMPS SULPLY 20 AMPERE 240W, LED Driver,Specially designed for arduino board compatible devices 12 volt 20 AMPERE electronic transformer,Power Supply for 3D Printer,Specially designed for car Stereo Amplifier in use home Output Voltage: 12V...
Rs. 1,000.00
Rs. 899.00
5V 2A SMPS BASED AC TO DC ADAPTER ROBO PLUS
Voltage Output: Provides a consistent output voltage of 5 volts. Current Output: Capable of delivering a maximum current of 2 ampere (2A). Compact Design: Compact and portable design for easy use and storage. Versatile Use: Suitable for a variety of low-power devices requiring 12V...
Rs. 299.00
Rs. 229.00
ERD 5V 3A Mobile Charger USB A Dock Charger (BIS Certified)
BIS Certified USB A Dock Charger
Type A Usb Cable Port
USB Output:- DC 5V-3A
Short Circuit Protection
Input Voltage: 150-240v AC, 50-60Hz, 0.3A
Rs. 375.00
Rs. 295.00
Official 27W USB-C PD Power Supply for Raspberry Pi 5- White
Input: 100-240VAC Output: 5A @ 5.1V, 3A @ 9V, 2.25A @ 12V, 1.8A @ 15V Connector: USB-C Cable: 1.2m, 18awg Color: White Plug Type : IN The new 27W USB-C PD (Power Delivery) Power Supply will deliver a maximum of...
Rs. 1,850.00
Rs. 1,178.00
KENTO-G 12V 1A Adaptor - DC jack
Input 100-270V AC 50/60Hz Output 12Volts 1Amp Output Type DC Kento G 12V 1A Adapter - DC jack 12 Volt 1 Amp Power Adapter takes an AC INPUT of 100-270V and gives 12V 1A DC output. This power adapter is suitable for...
Rs. 259.00
Rs. 135.00
Showing 1 - 24 of 99 total
