Foldscope Basic Kit Foldable DIY Paper Microscope
Check out the Foldscope Add On Basic Kit Foldable DIY Paper Foldscope (Microscope Basic Kit) Foldscope, the Original Origami Microscope. Easy to build and use. 140x Magnification 2-micrometer resolution Scientifically accurate and durable. Build a working origami paper microscope that will...
Rs. 499.00 Rs. 359.00
Add to wishlist
4WD Four Wheel Robotic Smart Car Kit with Acrylic Chassis
 This is a Longer version of 4 wd double-layer smart car chassis. It comes with four pairs of Geared Motors and Wheels. All the products included in this car kit are quality products. The chassis used in this kit is transparent...
Rs. 850.00 Rs. 689.00
Add to wishlist
Raspberry PI Pico
Rs. 450.00 Rs. 369.00
Raspberry PI Pico
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C,...
Rs. 450.00 Rs. 369.00
Breadboard Solderless 400 Pin with 120pc Jumper Wires 20cm (Male-Female, Female-Female, Male-Male)
Set of 400 points bread board and 120 pieces of jumper wires of 20cm . Jumper wires set contains 40 each of male to male, male to female and female to female jumper wires. Length of jumper wires of 20...
Rs. 300.00 Rs. 240.00
Add to wishlist
Foldscope Add on Basic Kit
Rs. 250.00 Rs. 169.00
Foldscope Add on Basic Kit
1 Yellow Accessory Pouch containing: 1 extra 140x lens 2 extra cell phone couplers (works with mobile/cell phones) 1 Field guide 1 LED/Magnifier  1 Slide box with pre-made glass slides and blank glass slides  Check out the Foldscope Basic Kit
Rs. 250.00 Rs. 169.00
Big Rubber Band Powered DIY Plane Toy Kit Aircraft Model
Material: foam + wood + plastic + rubber Size: Approx. 50cm x 43cm(L x W) Color: Random Elastic powered aircraft, which rise up by a propeller through using the energy of the elastic. While the power of elastic run out,...
Rs. 350.00 Rs. 289.00
Mini Tesla Coil 9-12 V
Rs. 750.00 Rs. 499.00
Mini Tesla Coil 9-12 V
Input voltage(V): 9-12 It can produce high-temperature PCB board size(cm):  3.1 x 4 It is convenient for fans to install high efficiency Weight(g): 20
Rs. 750.00 Rs. 499.00
Breadboard Solderless 400 Pin with 120 Jumper Wires 10cm (Male-Female, Female-Female, Male-Male)
Set of 400 points bread board and 120 pieces of jumper wires of 10cm . Jumper wires set contains 40 each of male to male, male to female and female to female jumper wires. Length of jumper wires of 10...
Rs. 260.00 Rs. 215.00
Add to wishlist
37 in 1 Sensor Module Kit for Arduino
This 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors. It comprises 37 Pcs...
Rs. 1,999.00 Rs. 999.00
Add to wishlist
Thermoelectric Peltier Refrigeration Cooling System DIY Kit (without Peltier)
Using GL style of the refrigerator, effectively release the thermal deformation ability of the refrigerator produce at work. Small volume, does not occupy space, installation is simple. It can be used as a Pet Air Conditioner (chicken, little dog, etc.)...
Rs. 800.00 Rs. 549.00
Add to wishlist
Small Rubber Band Powered DIY Plane Toy Kit Aircraft Model
Material: foam + wood + plastic + rubber Size: Approx. 30cm x 40cm(L x W) Color: Random Elastic powered aircraft, which rise up by a propeller through using the energy of the elastic. While the power of elastic run out,...
Rs. 300.00 Rs. 199.00
Arduino ProMini ATMEGA328P 5V/16Mhz
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX /...
Rs. 999.00 Rs. 399.00
Add to wishlist
Solderless 400 Pin bread board with 60 Jumper Wires 10cm (Male-Female, Female-Female, Male-Male)
Set of 400 points bread board and 60 pieces of jumper wires of 10cm . Jumper wires set contains 20 each of male to male, male to female and female to female jumper wires. Length of jumper wires of 10...
Rs. 200.00 Rs. 140.00
Add to wishlist
DIY Mini Wind Turbine Blade Vertical Axis Blades Small Set (Only Blades)
DIY Mini Wind Turbine Blade Vertical Axis Blades Small Set (Only Blades) Material - Plastic Blade diameter - Approx. 100mm/3.94"(after assembling) Blade Aperture - approx. 1.95mm/0.077" Motor / Generator Not Included Package includes : 4 x Vertical Blade. 1 x Blade Mounting...
Rs. 350.00 Rs. 199.00
Add to wishlist
Medium Rubber Band Powered DIY Plane Toy Kit Aircraft Model
Material: foam + wood + plastic + rubber Size: Approx. 50cm x 43cm(L x W) Color: Random Elastic powered aircraft, which rise up by a propeller through using the energy of the elastic. While the power of elastic run out,...
Rs. 330.00 Rs. 249.00
Add to wishlist
DIY RF Control Robot Kit Arduino Based
DIY RF Control Robot Kit Arduino Based RF CONTROLLED ROBOTAn Arduino RF (Radio Frequency) controlled robot using PT2272 is a project that involves building a robot that can be wirelessly controlled using RF signals. The PT2272 is a decoder IC...
Rs. 3,500.00 Rs. 2,299.00
DIY Line Follower Robot Kit Arduino Based
DIY Line Follower Robot Kit Arduino Based LINE FOLLOWER ROBOT An Arduino line follower robot using IR (Iinfrared) sensors is a popular and educational project in the field of robotics. This type of robot is designed to follow a predefined...
Rs. 3,000.00 Rs. 1,999.00
DIY Q1 Mini Quadruped Robot with 3D Printed Parts (White)
DIY Q1 Mini Quadruped Robot with 3D Printed Parts Package Contains- 37x  3D PRINTED PARTS (White) 8x SG9O SERVO MOTOR 2x 18650 LI ION BATTERY 1x CELL HOLDER 45x M1.7 X 8MM SCREWS 1x ESP32 DEV MODULE 20X JUMPER CABLES 1X 170 POINTS...
Rs. 7,500.00 Rs. 5,999.00
Breadboard GL12 + 120PC 10cm Male to Male, Male to Female, Female to Female Jumper Wires
Set of 840 points bread board and 120 pieces of jumper wires. Jumper wires set contains 40 each of male to male, male to female and female to female jumper wires. Length of jumper wires 10 cm.
Rs. 350.00 Rs. 289.00
Add to wishlist
DIY 3DOF 3-Axis Control Palletizing Robot Arm Model with Servo Arm Plate
Note: (Servo Motors are not included) Kit include: 1 mechanical claw 2 multifunctional steering gear supports 1 long U-shaped support 1 L-shaped bracket 1 cup bearing Metal steering wheel 3 1 U-beam Complete with enough screws for installation  This is...
Rs. 3,900.00 Rs. 2,999.00
DIY Tank Toy Assembly Kit- BLUE
Rs. 550.00 Rs. 449.00
DIY Tank Toy Assembly Kit- BLUE
Operating Voltage: 3V DC Battery required: 2 x AA Tank Colour: Blue This is DIY Blue interesting Tank Toy Assembly Kit. This kit includes all pullies, DC motor, and accessories to build a tank toy by yourself. It is very...
Rs. 550.00 Rs. 449.00
Add to wishlist
50 Kinds of Chassis Material Package Car Frame Parts DIY Gears Set 77Pcs Gears Bag
50 kinds of gear package schemes: 2mm motor and 2mm axle as the starting point, all series gears and plastic parts are 2mm holes, with spindle gear and single-layer gear as part, belt pulley and belt as part, 130 motor...
Rs. 850.00 Rs. 499.00
Micro-HDMI to HDMI Cable 235mm for Raspberry Pi
  Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4). A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance. Nickel-plated connectors for highest signal transfer rate and resistance in corrosion. Large gauge...
Rs. 325.00

Showing 1 - 24 of 43 total

You have successfully subscribed!
This email has been registered