Motors, Drivers, Actuators - Motor Driver
Motors, Drivers, Actuators - Motor Driver
L298N 2A Based Motor Driver Module
Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes L298N...
Rs. 250.00
Rs. 125.00
3 in 1 Motor Driver Shield for Arduino L293D
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to...
Rs. 250.00
Rs. 179.00
L293D Motor Driver Module Board
L293D motor driver IC. Voltage Range: 4.5 V to 36 V Separate Input-Logic Supply Pin compatible with L293D Internal ESD Protection Male burg stick connectors for supply, ground and input connection Screw terminal connectors for easy motor connection On...
Rs. 199.00
Rs. 89.00
L293D Motor Driver Module Board Adiy
Dual H-bridge motor driver, capable of driving two DC motors or one stepper motor Can drive motors with a voltage range of 4.5V to 36V and a current of up to 600mA per channel (1.2A peak) Compatible with Arduino and...
Rs. 150.00
Rs. 99.00
A4988 Stepper Motor Driver Module
The A4988 is a complete Microstepping Motor Driver with built-in translator for easy operation. The driver has a maximum output capacity of 35 V and 2 A. It can operate bipolar stepper motors in full-, half-, quarter-, eighth-, and sixteenth-step...
Rs. 150.00
Rs. 99.00
20A ESC Brushed Electronic Speed Controller
Continuous Current :20A
Battery Input: 2S Lipo
Can be used with 130/180/260/380 brushed motor
Three Functions: Forward/Reverse/Breaking
Rs. 750.00
Rs. 499.00
ULN2003 Stepper Motor Driver Board
ULN2003A motor driver chip Chip all the pins already leads for easy connection to use 5-12V power supply 4-way signal indicator XH-5P socket can be connected directly 28BYJ-48 Model stepper motor This is the ULN2003 Driver Module Stepper Motor Driver...
Rs. 150.00
Rs. 75.00
5A PWM DC Motor Speed Regulator
Mini DC 4.5-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller. Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. --3V 6V 12V 24V 35V PWM 5A DC Motor Speed Regulator...
Rs. 399.00
L293D 4 Channel Motor Driver Module
New L293D motor shield, The input voltage DC4.5-25V 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive) OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES The Device is a mnolithic...
Rs. 250.00
Rs. 149.00
TB6600 Stepper Motor Driver Controller
Input Current: 0~5A Output Current: 0.5~4.0A Control Signal: 3.3~24V Power (MAX): 160W Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32 Temperature: -10～45℃ H bridge bipolar constant current drive. TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor...
Rs. 880.00
Rs. 469.00
PWM 10A 12V-40V DC Motor Speed Control Switch Governor
Input supply voltage: DC 12V-40V The maximum output power: 400W The maximum continuous output current:8A Static Current:0.02 A ( Standby ) PWM frequency: 13kHz Duty Cycle adjustable: 10%-100% The DC Motor Speed Controller allows controlling direction of a DC motor...
Rs. 600.00
Rs. 259.00
Monster Moto Shield VNH2SP30 Motor Driver
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Under voltage and Overvoltage shutdown. -- Monster...
Rs. 2,000.00
Rs. 1,699.00
PWM Motor Speed Controller 2000W 40A 9-50V DC Electronic Speeder
Maximum Output Power: 2000W Maximum Output Current: 40A Power Supply: 9-50VDC High Quality ABS Case This 9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V is used to control the speed of DC motors from 9V to 50V...
Rs. 690.00
Rs. 499.00
L298N Mini Motor Driver Module 2 Way Dual H Bridge MX1508
The dual H-bridge motor drive can operate two DC motors or a four-wire two-phase step motor. The module supply voltage is 2V-10V. The signal input voltage is 1.8-7V. Single operation current 1.5A, peak current 2.5A, low standby current (less...
Rs. 150.00
Rs. 99.00
ULN2003 - Stepper Motor Driver Board(MICRO)
5-12V power supply 4-way signal indicator Chip all the pins have Input leads Mounted for easy connection to use XH-5P socket can be connected directly 28BYJ-48 Model stepper motor Dimensions: 32 x 18 x 11mm (LxWxH) Weight: 3 gm--This is...
Rs. 199.00
Rs. 390.00
Rs. 199.00
2000W SCR Thyristor, High-Power Electronic Regulator, can Change Light, Speed and Temperature
Input Voltage: 220V AC. Maximum Power: 2000W. Adjustable Voltage: 0-220V AC. AC frequency: 50-60Hz. Size(LxWxH): Approx 85 x 55 x 38 mm. This is a 2000W Thyristor SCR Voltage Regulator Temperature Dimmer for Speed / Light (AC 220V). 2000W Thyristor...
Rs. 390.00
Rs. 199.00
ESP8266 Motor Shield Board L293D for ESP-12E NodeMCU
L293D Wifi Motor Drive Shield For Arduino Node Mcu ESP8266 ESP-12E Motor Power Range: 4.5V ~ 36V Control supply range: 4.5V ~ 9V Logical operating current Iss: ≤60mA Driving part of the work current Io: ≤1.2A Maximum power dissipation: 4W...
Rs. 450.00
Rs. 169.00
L9110 - 2 DC Motor Driver Board stepper
L9110S-chip motor drive Supply voltage: 2.5-12V The maximum operating current of 0.8A Drive two DC motors or a 4-wire 2-phase stepping motor. Ultra-small size, suitable for assembly--The L9110S Dual Channel Motor Driver Module is a compact board that can be...
Rs. 160.00
Rs. 109.00
TB6612FNG Dual Motor Driver Module 1A
The TB6612FNG Module motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes –...
Rs. 350.00
Rs. 229.00
TB6560 Stepper Motor Driver Controller
Driver Chip: TB6560AHQ Operating Voltage: 10-35V Nominal Voltage: 24V With the large heat sink to ensure good heat dissipation 6N137 high-speed OptoCoupler, to ensure a high speed without step out. -- The TB6560 Driver Board 3A CNC Router Single 1...
Rs. 800.00
Rs. 699.00
Adafruit DC & Stepper Motor HAT
Let your robotic dreams come true with the new DC+Stepper Motor .This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the...
Rs. 4,000.00
Rs. 3,500.00
HG 7881 4-Channel DC 2.4-10V H Bridge Motor Driver Broad
Operating voltage: 2.5-12V Suitable for: motor operating voltage 2.5V-12V Operating current: 0.8A maximum No. of channel: 4 This HG7881 4-Channel dc motor driver module comes with its own four L9110S chip. It can drive 4 DC or Can drive two...
Rs. 550.00
Rs. 399.00
L298P Motor Driver Shield
The logical part of the input voltage VD: 5V Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input The logical part of the work current Iss:<36mA Driven part of the operating current...
Rs. 999.00
A3967 Easy Motor Driver
The Easy Driver is designed by Brian Schmalz, and is designed around the A3967 IC. This IC enables you to drive bipolar stepper motors that are 4, 6, or 8-wire configurations. The board can either work with 3.3V or 5V...
Rs. 499.00