Motors, Drivers, Actuators
Motors, Drivers, Actuators
SG90 Mini Servo - 180 degree Rotation
Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications,...
Rs. 200.00
Rs. 99.00
L298N 2A Based Motor Driver Module
Features: Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes...
Rs. 250.00
Rs. 129.00
Rs. 40.00
Rs. 35.00
6mm Coupler, Flanged Coupling for 6mm shaft motor - Shaft Coupling, For DC Geared Motor
Bore diameter: 6mm Material: Aluminium This is coupling for a 6mm shaft motor , it can be use to couple with any motor with 6mm shaft diameter This coupling is generally used to couple 6mm shaft DC motor with anything...
Rs. 40.00
Rs. 35.00
Rs. 190.00
Rs. 75.00
Double Side Pipe Hole Micro DC 6-9V Submersible and Non Submersible Mini Water Pump
Operating Current : 130 ~ 220mA Outlet Outside Diameter : 7.5 mm Outlet Inside Diameter : 5 mm Flow Rate : 80 ~ 120 L/H, Maximum Lift : 40 ~ 110 mm, Continuous Working Life : 500 hours This DC...
Rs. 190.00
Rs. 75.00
TowerPro MG 90 S Mini Digital Servo Motor- 180 Degree Rotation
Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v) Servo: Digital Servo Operating Voltage: 4.8v- 6v Structural Material: Metal gear Coreless Motor DUAL BALL Axle Bearing Operating speed: 0. 1sec/60degree(4. 8v), 0. 08sec/60degree(6v). Stall torque: 1.8kg/cm(4. 8v )2.2kg/cm(6v). High...
Rs. 250.00
Rs. 139.00
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control
The Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control offers 3 modes to check servos or ESC. The Manual Mode allows you to turn the knob to different speeds and check the reaction time. The Neutral mode...
Rs. 199.00
Rs. 139.00
3 in 1 Motor Driver Shield for Arduino L293D
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to...
Rs. 250.00
Rs. 169.00
DC Toy Motor
Operating Voltage Range: 3 ~ 9VDC No-load Current: 70 mA max Loaded Current: 200 mA max Operating Temperature: 50°C Rated Speed: 1000 RPM 3V to 9V DC Flat Small Size Toy Motor DC Toy Motor-Dc Motor These are standard ‘130...
Rs. 35.00
Rs. 19.00
DC Water U Pump 4-9v for Automatic Sanitizer Dispenser, fountain, aquarium
DC 4-9v Water Pump For Automatic Sanitizer Dispenser DC Water Pump. This Motor can be used to dispense water or sanitizer. -- DC Water Pump with Pipe. This Motor can be used to dispense water or sanitizer. Just connect tube pipe...
Rs. 190.00
Rs. 140.00
10 RPM CS DC GEAR MOTOR -CENTER SHAFT
The metal gears have better wear and tear properties. Gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of...
Rs. 250.00
Rs. 219.00
Micro Submersible Pump Mini water pump Dc 6v to 9v (Black)
Operating Voltage Dc 6V To 9V Submersible Pump Operating Current : 130 ~ 220mA Outlet Inside Diameter : 5 mm Outlet Outside Diameter : 7.5 mm Flow Rate : 80 ~ 120 L/H, Maximum Lift : 40 ~ 110 mm...
Rs. 110.00
100 RPM CS DC GEAR MOTOR -CENTER SHAFT
The metal gears have better wear and tear properties. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a...
Rs. 230.00
Rs. 169.00
N20 Caster Robot Ball Wheel MINI 3PI car
Dimensions: 22 x 15 mm (Diameter x Height) Weight: 10 gm Body Case Material: Plastic Ball Material: 304 Stainless Steel Application: for MiniQ robot This MINI 3PI car N20 Caster Robot Ball Wheel consists of four small balls and a diameter...
Rs. 75.00
Rs. 49.00
44mm Wheel for N20 DC Gear Motor
Wheel Outer Diameter: 44MM Wheel width: 18 mm Tire material: Rubber Color: Black & White Weight: 18 gm Coder Accuracy: 12 pulses per revolution Wheel weight: 19.4 gm. The hub for N20 micro motor output shaft design of the bayonet,...
Rs. 120.00
Rs. 39.00
3.5 RPM CS DC GEAR MOTOR -CENTER SHAFT
The metal gears have better wear and tear properties. Gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although motor gives 3.5 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of...
Rs. 300.00
Rs. 199.00
Rs. 125.00
Rs. 69.00
Dynamo Motor / DC Mini Electric Motor / Flat Cylinder Motor for RC Toys High Speed (4v to 12v)
Rated Voltage: 3.0VDC , RPM: 4800 r/min Voltage：1.0～3.0V DC No load current：110mA max Operating Voltage: 1.5V to 6V DC Superior running quietness and stability Motor weight: ~85grams (approx) Mode: M260 Voltage1.0 3.0V DC Rotationclockwise from the motor shaft Store Temperature...
Rs. 125.00
Rs. 69.00
TB6612FNG Dual Motor Driver Module 1A TB6612 Ultra Small Performance
The TB6612FNG Module motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes –...
Rs. 250.00
Rs. 169.00
200 RPM DC BO Gear Motor Single Shaft
The 200 RPM Single Shaft BO Motor - Straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. Small shaft with matching wheels gives an optimized design for your application or...
Rs. 100.00
Rs. 55.00
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
PWM capability of up to 25 kHz combined with active freewheeling. Switched mode current limitation for reduced power dissipation in overcurrent Overtemperature shut down with latch behavior. Undervoltage shut down. Overvoltage lockout. The Double BTS7960 43A H-Bridge High-Power Stepper Motor...
Rs. 450.00
Rs. 299.00
300 RPM (Grade A) Johnson DC Gear Motor -Side Shaft
Base Motor RPM: 11000 Operating Voltage: 12 V Rated Voltage: 12 V Rated Torque: 34.2 N-cm Stall Torque: 300 N-cm 9.06kgcm Holding Torque No-load current = 800 mA, Load current = upto 7.5 A(Max) 300RPM 12V DC motors with Metal...
Rs. 550.00
Rs. 479.00
6 - 6mm Shaft Coupling Joint Connector Extender
The Coupler help to joint two 6mm shaft Length of the Coupler : 30 mm (Approx) Inner Diameter of the Coupler : 6 mm. Material of the Shaft Axle : Stainless Steel. Please note that the bore diameters of this product...
Rs. 50.00
Rs. 35.00
30 RPM CS DC GEAR MOTOR -CENTER SHAFT
The metal gears have better wear and tear properties. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 30 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a...
Rs. 250.00
Rs. 199.00
Mobile Phone Vibrator Motor (Coin Vibrate Motor)
Rated voltage: 3.0VDC Thickness : 3mm Rated load: eccentric hammer Rated speed: 12000+/-2500RPM Rated current: 70mA Max Low noise level enables feedback without unwanted distractions Rotates both CW and CCW for ease of use and installation This is a tiny...
Rs. 80.00
Rs. 39.00
SG90 Micro Servo - 360 degree Continuous Rotation
Model: SG90 (360 Rotation) Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm Wire Description RED – Positive Brown – Negative Orange – Signal Features : High resolution Accurate positioning Fast control...
Rs. 200.00
Rs. 149.00
Showing 1 - 24 of 281 total