ST-Link V2 Automatic Upgrade Perfect Support for STM8 STM32 Downloader/Programmer
internal motherboard, U disk shell using aluminum alloy installation, convenient to carry, safe and reliable!--The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD)...
Rs. 999.00
STM32 ARM Development Core Board
Rs. 1,320.00 Rs. 1,199.00
STM32 ARM Development Core Board
72MHz work frequency. 64K flash memory, 20K SRAM. 2.0-3.6V power, I/O. Reset(POR/PDR). 4-16MHz crystal. -- Board is suitable for learners that want to learn the STM32 microcontroller with ARM Cortex-M3 32-bit core.
Rs. 1,320.00 Rs. 1,199.00
Add to wishlist
STM32F030F4P6 - Core Development Board
Input Voltage: 3.3 V Output Voltage: 5-3.3 V CPU ARCHITECTURE: RM CORTEX-M0 MICROPROCESSOR MODEL: STM32F030F4P6--This STM32F030F4P6 core board development board core ARM CORTEX-M0 board is a Minimum System Board STM32F030F4P6 (Cortex-M0). The MCU target is STM32F030F4P6 which is provided by...
Rs. 799.00
ARM LPC2148 USB Development Board
Rs. 4,500.00 Rs. 2,499.00
ARM LPC2148 USB Development Board
Technical Specifications Microcontroller: LPC2148 with 512K on chip memory Crystal for LPC2148: 12Mhz Crystal for RTC: 32.768KHz 50 pin Berg header for external interfacing Wireless module adapter for 2.4GHz ZigBee (Xbee) / Bluetooth / WiFi connectivity On board 512 bytes...
Rs. 4,500.00 Rs. 2,499.00
Add to wishlist
XC9572XL XILINX CPLD Dev. Board
XC9572XL XILINX CPLD Development Board--CPLDs can give you the logic you need with the pinout as needed. CPLD XC9572XL has 72 macrocells and 5 V tolerant inputs. +5V power supply must be provided using the DC socket. It features an...
Rs. 0.00
Arduino Due
Rs. 4,200.00 Rs. 4,099.00
Arduino Due
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4...
Rs. 4,200.00 Rs. 4,099.00
Add to wishlist
PIC18F4520 PIC development board Minimum system (WITHOUT IC)
8 LEDs are connected to the RD port. When the J3 is plugged in, the LED is enabled. J3 is unplugged and the RD port is completely released. External 5V DC power interface (send USB power cable without additional purchase)....
Rs. 2,800.00 Rs. 1,999.00
Add to wishlist
PICkit 3 In-Circuit Debugger/Programmer, Supports PIC MCUs & dsPIC DSCs
USB (Full speed 12 Mbits/s interface to host PC) Real-time execution MPLAB IDE compatible Built-in over-voltage/short circuit monitor Firmware upgradeable from PC/web download Totally enclosed Supports low voltage to 2.0 volts (2.0v to 6.0v range) Diagnostic LEDs (power, busy, error)...
Rs. 1,799.00
Add to wishlist
PICkit2 - PIC IC Programmer & debugger
Full-speed USB support using Windows standard drivers Real-time execution Processors run at maximum speeds Built-in over-voltage/short circuit monitor--PICKIT-2 is USB interfaced, low cost ICSP programmer for Flash PIC microcontrollers. It only supports a subset of PIC microcontrollers available at present....
Rs. 0.00
You have successfully subscribed!
This email has been registered