SG90 Mini Servo - 180 degree Rotation
Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications,...
Rs. 200.00 Rs. 99.00
Add to wishlist
L298N 2A Based Motor Driver Module
Features: Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes...
Rs. 250.00 Rs. 129.00
Add to wishlist
6mm Coupler, Flanged Coupling for 6mm shaft motor - Shaft Coupling, For DC Geared Motor
Bore diameter: 6mm Material: Aluminium This is coupling for a 6mm shaft motor , it can be use to couple with any motor with 6mm shaft diameter This coupling is generally used to couple 6mm shaft DC motor with anything...
Rs. 40.00 Rs. 35.00
Add to wishlist
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control
The Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control offers 3 modes to check servos or ESC. The Manual Mode allows you to turn the knob to different speeds and check the reaction time. The Neutral mode...
Rs. 199.00 Rs. 139.00
Add to wishlist
TowerPro MG 90 S Mini Digital Servo Motor- 180 Degree Rotation
Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v) Servo: Digital Servo Operating Voltage: 4.8v- 6v Structural Material: Metal gear Coreless Motor DUAL BALL Axle Bearing  Operating speed: 0. 1sec/60degree(4. 8v), 0. 08sec/60degree(6v). Stall torque: 1.8kg/cm(4. 8v )2.2kg/cm(6v). High...
Rs. 250.00 Rs. 139.00
Add to wishlist
Double Side Pipe Hole Micro DC 6-9V Submersible and Non Submersible Mini Water Pump
Operating Current : 130 ~ 220mA Outlet Outside Diameter : 7.5 mm  Outlet Inside Diameter : 5 mm  Flow Rate : 80 ~ 120 L/H,  Maximum Lift : 40 ~ 110 mm, Continuous Working Life : 500 hours  This DC...
Rs. 190.00 Rs. 75.00
Add to wishlist
3 in 1 Motor Driver Shield for Arduino L293D
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to...
Rs. 250.00 Rs. 169.00
Add to wishlist
DC Water U Pump 4-9v for Automatic Sanitizer Dispenser, fountain, aquarium
DC 4-9v Water Pump For Automatic Sanitizer Dispenser DC Water Pump. This Motor can be used to dispense water or sanitizer. -- DC Water Pump with Pipe. This Motor can be used to dispense water or sanitizer. Just connect tube pipe...
Rs. 190.00 Rs. 140.00
Add to wishlist
DC Toy Motor
Rs. 35.00 Rs. 19.00
DC Toy Motor
Operating Voltage Range: 3 ~ 9VDC No-load Current: 70 mA max Loaded Current: 200 mA max Operating Temperature:  50°C Rated Speed: 1000 RPM 3V to 9V DC Flat Small Size Toy Motor DC Toy Motor-Dc Motor These are standard ‘130...
Rs. 35.00 Rs. 19.00
Add to wishlist
10 RPM CS DC GEAR MOTOR -CENTER SHAFT
The metal gears have better wear and tear properties. Gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of...
Rs. 250.00 Rs. 219.00
100 RPM CS DC GEAR MOTOR -CENTER SHAFT
The metal gears have better wear and tear properties. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a...
Rs. 230.00 Rs. 169.00
Add to wishlist
3.5 RPM CS DC GEAR MOTOR -CENTER SHAFT
The metal gears have better wear and tear properties. Gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although motor gives 3.5 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of...
Rs. 300.00 Rs. 199.00
Add to wishlist
Tower Pro MG995 Metal Gear Servo Motor (180 Degree Rotation)
Model: MG995 Weight: 55 gm Operating voltage: 4.8V~ 7.2V Servo Plug: JR Stall torque @4.8V : 13kg-cm Stall torque @6.6V : 15kg-cm Wire Description RED – Positive Brown – Negative Orange – Signal Features :  High resolution Accurate positioning Fast control response Constant...
Rs. 399.00 Rs. 299.00
Add to wishlist
Micro Submersible Pump Mini water pump Dc 6v to 9v (Black)
Operating Voltage Dc 6V To 9V Submersible Pump Operating Current : 130 ~ 220mA Outlet Inside Diameter : 5 mm Outlet Outside Diameter : 7.5 mm Flow Rate : 80 ~ 120 L/H, Maximum Lift : 40 ~ 110 mm...
Rs. 110.00
Add to wishlist
30 RPM CS DC GEAR MOTOR -CENTER SHAFT
The metal gears have better wear and tear properties. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 30 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a...
Rs. 250.00 Rs. 199.00
Add to wishlist
300 RPM (Grade A) Johnson DC Gear Motor -Side Shaft
Base Motor RPM: 11000 Operating Voltage: 12 V Rated Voltage: 12 V Rated Torque: 34.2 N-cm Stall Torque: 300 N-cm 9.06kgcm Holding Torque No-load current = 800 mA, Load current = upto 7.5 A(Max) 300RPM 12V DC motors with Metal...
Rs. 550.00 Rs. 479.00
Add to wishlist
60 RPM CS DC GEAR MOTOR - CENTER SHAFT
The metal gears have better wear and tear properties. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although motor gives 60 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide...
Rs. 220.00 Rs. 189.00
Add to wishlist
Dead Axle, Free Axle, Dummy Motor 6mm Shaft
Free Axle Set of 4 CS Motor Top Part Shaft Size: 6mm; Length: 23mm Used for idle wheel mounting in robot car vehicle--Dead Axle , Free Axle, Dummy Motor 6mm Shaft This free axle module comes in handy when you...
Rs. 60.00 Rs. 39.00
Add to wishlist
N20 Caster Robot Ball Wheel MINI 3PI car
Dimensions: 22 x 15 mm (Diameter x Height) Weight: 10 gm Body Case Material: Plastic Ball Material: 304 Stainless Steel Application: for MiniQ robot This MINI 3PI car N20 Caster Robot Ball Wheel consists of four small balls and a diameter...
Rs. 75.00 Rs. 49.00
Add to wishlist
N20 DC Gear Motor Wheel
Rs. 120.00 Rs. 59.00
N20 DC Gear Motor Wheel
Tire material: Rubber--The hub for N20 micro motor output shaft design of the bayonet, the ferry can plug and play, without an additional field.
Rs. 120.00 Rs. 59.00
Add to wishlist
Dynamo Motor / DC Mini Electric Motor / Flat Cylinder Motor for RC Toys High Speed (4v to 12v)
Rated Voltage: 3.0VDC , RPM: 4800 r/min Voltage:1.0~3.0V DC No load current:110mA max Operating Voltage: 1.5V to 6V DC Superior running quietness and stability Motor weight: ~85grams (approx) Mode: M260 Voltage1.0 3.0V DC Rotationclockwise from the motor shaft Store Temperature...
Rs. 125.00 Rs. 69.00
Add to wishlist
200 RPM CS DC GEAR MOTOR -CENTER SHAFT
Operating Voltage(V): 12 Rated Speed (RPM): 200 Rated Torque(kg-cm): 1.5 Stall Torque(kg-cm): 5.4 Load Current (A): 0.3 No Load Current (A): 0.06
Rs. 230.00 Rs. 149.00
Add to wishlist
6 - 6mm Shaft Coupling Joint Connector Extender
The Coupler help to joint two 6mm shaft  Length of the Coupler : 30 mm (Approx) Inner Diameter of the Coupler : 6 mm. Material of the Shaft Axle : Stainless Steel. Please note that the bore diameters of this product...
Rs. 50.00 Rs. 35.00
Add to wishlist
12V DC Cabinet Door Drawer Electric Lock Assembly Solenoid Lock (54x42x28)
12 V DC Cabinet Lock Actuator lock Holding force: 0.25 kg Energized forms: intermittent Unlocking time: 1s Dimensions: 54 x 42 x 28 mm (LxWxH) High quality ultra-compact electric lock. This DC 12V Cabinet Door Lock Electric Lock Assembly Solenoid...
Rs. 550.00 Rs. 399.00
Add to wishlist

Showing 1 - 24 of 258 total

Recently Viewed Products

You have successfully subscribed!
This email has been registered