Adiy FLY Pico RP2040 Board

Description

ADIY FLY comes with a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with a unique Programmable I/O (PIO) subsystem, RP2040 provides professional users with unrivalled power and flexibility. ADIY FLY pairs RP2040 with 4MB of Flash memory, and a power supply chip supporting input voltages from 1.8-5.5V. It provides 26 GPIO pins, three of which can function as analog inputs, on 0.1”-pitch through-hole pads with castellated edges. ADIY FLY has SD card slot installed. The RESET button on ADIY FLY makes the usage of the module easy.  

• Number of processor cores (2)
• Loosely which type of processor (M0+)
• floor(log2(ram / 16k))
• floor(log2(nonvolatile / 16k)) or 0 if no onboard nonvolatile storage

RP2040 is manufactured on a modern 40nm process node, delivering high performance, low dynamic power consumption, and low leakage, with a variety of low-power modes to support extended-duration operation on battery power.  

Key features: Pico RP2040 Board – ADIY FLY

• Dual ARM Cortex-M0+ @ 133MHz
• 264kB on-chip SRAM in six independent banks
• Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
• DMA controller
• Fully-connected AHB crossbar
• Interpolator and integer divider peripherals
• On-chip programmable LDO to generate core voltage
• 2 on-chip PLLs to generate USB and core clocks
• 30 GPIO pins, 4 of which can be used as analog inputs

Peripherals: Pico RP2040 Board – ADIY FLY

• 2 UARTs
• 2 SPI controllers
• 2 I2C controllers
• 16 PWM channels
• USB 1.1 controller and PHY, with host and device support
• 8 PIO state machines

Resources: RP2040 Board Pico – ADIY FLY

Documentation for Pico RP2040 Board – ADIY FLY  and other RP2040-based boards.

1. RP2040 Datasheet
2. Raspberry Pi Pico