DJI Mic Mini 2 Transmitter -Ultra Light Wireless Microphone with Noise Cancelling
DJI Mic Mini 2 Transmitter -Ultra Light Wireless Microphone with Noise Cancelling
Couldn't load pickup availability
The DJI Mic Mini 2 is a compact 11 g wireless microphone built for creators who refuse to compromise on sound or style. Swappable magnetic front covers let you match any outfit, while three voice tone presets, two-level noise cancellation, and 48 kHz/24-bit audio ensure your recordings always sound their best. With up to 48 hours of total battery life, 400 m transmission range, and direct DJI OsmoAudio compatibility, the Mic Mini 2 is everything you need - nothing you don't.
DJI Mic Mini 2 Transmitter
-
Model
-
DMMT02
-
Dimensions
-
28.58×28.04×13.52 mm (L×W×H)
-
Weight
-
Approx. 11 g (excluding the magnet clip and magnet)
-
Wireless Mode
-
GFSK 2Mbps
-
Equivalent Isotropic Radiated Power (EIRP)
-
< 20 dBm
-
Wireless Mode Operating Frequency
-
2.400-2.4835 GHz
-
Bluetooth Protocol
-
Bluetooth 5.3
-
Bluetooth Operating Frequency
-
2.400-2.4835 GHz
-
Bluetooth Transmitter Power (EIRP)
-
< 20 dBm
-
Battery Type
-
Li-ion
-
Battery Capacity
-
114 mAh
-
Battery Energy
-
0.45 Wh
-
Battery Voltage
-
3.87 V
-
Charging Specification
-
Max 5 V
-
Charging Temperature
-
5° to 45° C (41° to 113° F)
-
Operating Temperature
-
-10° to 45° C (14° to 113° F)
-
Charging Time
-
Approx. 70 minutes
-
Operating Time
-
Approx. 11.5 hours
Measured using DJI Mic Mini 2 (2 TX + 1 RX), with noise cancellation off, during close-range audio recording under interference-free conditions, with the transmitter connected to the receiver and the receiver connected to a camera via the Camera Audio Cable (3.5mm TRS).
Shipping & Returns
Shipping & Returns
- Shipping Time:- Our orders are shipped within 24 Hours.
- Delivery Time:- 2-5 Days (Anywhere in India), 7-10 Days for remote location
- Shipping Partner:- Bluedart, Delhivery, Xpressbees, & India Post.
- Replacement:- Damaged During Transit, Missing Parts Or Item Mismatch.
- Return:- Item mismatch or parts missing etc.
- No return/Replacement will apply if the Product has been subject to misuse, static discharge, neglect, accident, modification, or has been soldered or altered in any way.
- We accept no responsibility for improper installation of our products. Electrical polarity must be properly observed in hooking up electrical components.
