ESP32-C3 vs ESP32-C6: Do You Need Wi-Fi 6 and Zigbee?
Share
Verdict. Both are small RISC-V boards. Pay the extra ₹200 for the C6 if you want Zigbee, Thread or Matter for smart home, or Wi-Fi 6 battery savings. Otherwise the C3 does the job.
Side by side
| ESP32-C3 | ESP32-C6 | |
|---|---|---|
| Processor | RISC-V, 160 MHz | RISC-V, 160 MHz + 20 MHz low-power core |
| SRAM | 400 KB | 512 KB |
| Wi-Fi | Wi-Fi 4 | Wi-Fi 6 (works with older routers too) |
| Bluetooth | BLE 5 | BLE 5 |
| Zigbee / Thread (802.15.4) | No | Yes |
| Matter | Over Wi-Fi | Over Wi-Fi or Thread |
| GPIO / ADC | 22 / 6 | 30 / 7 |
| IHC SuperMini price | ₹299 | ₹499 |
Choose the ESP32-C3 if
- You need plain Wi-Fi or BLE
- Lowest cost per node matters
- You follow existing C3 or ESP8266 tutorials
Choose the ESP32-C6 if
- You use Home Assistant with Zigbee or Thread
- You want to build Matter devices
- You want a low-power core reading sensors while the main core sleeps
- You want a newer, future-proof chip
Both chips use 2.4 GHz only. Wi-Fi 6 power saving needs a Wi-Fi 6 router; on an older router the C6 simply works as Wi-Fi 4. Zigbee works in the Arduino IDE with ESP32 core 3.x or in ESP-IDF.
Boards in stock at IHC
- ESP32-C3 SuperMini ₹299
- ESP32-C6 SuperMini ₹499
- 7Semi ESP32-C6 Mini with Qwiic ₹707
- Espressif ESP32-C6 WROOM-1 board ₹799
- ESP32-C6 with 1.47 inch display ₹1,999
FAQ
Can the ESP32-C6 be a Zigbee coordinator?
Yes, with ESP-IDF or the Arduino Zigbee library it can be a coordinator, router or end device.
Does the C6 connect to 5 GHz Wi-Fi?
No. Like other ESP32 boards here, it uses 2.4 GHz.
Still unsure? Read the full ESP32 buying guide.