ESP32-S3 vs ESP32-C3: Power or Price?
Share
Verdict. The C3 is the cheapest way to put Wi-Fi and BLE in a small sensor. The S3 is the powerful one, for cameras, displays, USB and AI. Same SuperMini size, ₹299 vs ₹469.
Side by side
| ESP32-S3 | ESP32-C3 | |
|---|---|---|
| Processor | Dual-core LX7, 240 MHz | Single-core RISC-V, 160 MHz |
| SRAM / PSRAM | 512 KB / up to 8 MB | 400 KB / none |
| Wireless | Wi-Fi 4 + BLE 5 | Wi-Fi 4 + BLE 5 |
| USB | Full USB (keyboard, mouse, storage) | USB serial and debug only |
| GPIO / ADC | 45 / 20 | 22 / 6 |
| Camera and LCD interface | Yes | No |
| IHC SuperMini price | ₹469 | ₹299 |
Choose the ESP32-S3 if
- Your project has a camera, display or microphone
- You want USB HID (keyboard, mouse, game pad)
- You run TinyML or face detection
- You need many pins
Choose the ESP32-C3 if
- You build simple sensors, relays or BLE beacons
- Size and price matter most
- It runs on a battery and sleeps most of the time
- You are replacing an ESP8266
The C3 can't act as a USB keyboard or mouse. Its USB port only uploads code and prints serial output.
Boards in stock at IHC
- ESP32-S3 SuperMini ₹469
- ESP32-S3-1 N16R8 Type-C ₹669
- ESP32-C3 SuperMini ₹299
FAQ
Is ESP32-C3 good for beginners?
Yes for simple Wi-Fi and BLE projects. It has fewer pins than the classic ESP32, so tutorials may need different pin numbers.
Does the ESP32-C3 run MicroPython?
Yes, MicroPython and the Arduino IDE both support it.
Still unsure? Read the full ESP32 buying guide.