{"product_id":"bambu-lab-x2d-3d-printer","title":"Bambu Lab X2D Dual Nozzle 3D Printer","description":"\u003cdiv class=\"ihc-x2d\"\u003e\n\u003cp\u003e\u003cstrong\u003eTwo nozzles. One clean print.\u003c\/strong\u003e The Bambu Lab X2D is the dual-nozzle successor to the X1 Carbon. Instead of purging filament every time the colour or material changes, it switches between two nozzles mechanically. You get faster colour and material changes, far less wasted filament, and clean, breakaway supports. It is fully enclosed, actively heats the chamber to 65 °C and filters the air with HEPA and carbon filters, so it works in an office, a classroom or a lab.\u003c\/p\u003e\n\u003ch2\u003eWhy the X2D is different\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual nozzle, no extra motor on the toolhead.\u003c\/strong\u003e A gear-and-ratchet mechanism swaps between the main nozzle (direct drive) and the auxiliary nozzle (Bowden). Bambu Lab tested the mechanism for more than one million switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess purge, less waste.\u003c\/strong\u003e Two materials are loaded at the same time, so the printer does not have to purge between every change. This makes a real difference on PLA plus PETG supports and on two-colour parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProper support material.\u003c\/strong\u003e Print PLA with PETG or dedicated support filament, ABS\/ASA with their supports, or nylon (PA\/PET) with soluble PVA. Supports come away cleanly and leave smooth surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering-ready.\u003c\/strong\u003e 300 °C hardened steel nozzle, 120 °C bed and 65 °C heated chamber for ABS, ASA, PC, PA, PET and carbon- or glass-fibre filaments. Cool Mode keeps the chamber cool for PLA and PETG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast.\u003c\/strong\u003e Up to 1,000 mm\/s and 20,000 mm\/s² acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31 sensors and AI monitoring.\u003c\/strong\u003e A 1080p chamber camera watches the build plate and the printer pauses when it spots a problem. A PMSM extruder motor reads 20,000 data points per second for steady extrusion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean air.\u003c\/strong\u003e Three-stage filtration: G3 pre-filter, H12 HEPA and activated carbon. Under 50 dB in Silent Mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-colour with AMS 2 Pro.\u003c\/strong\u003e The Combo includes AMS 2 Pro (4 spools, with filament drying) for up to 4 colours or materials on the main nozzle, plus the auxiliary nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct designers and engineers\u003c\/strong\u003e who print functional parts in ABS, ASA, PC or nylon and need clean supports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchools, colleges and ATL labs\u003c\/strong\u003e that need an enclosed, filtered printer that is safe to run in a classroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakers upgrading from A1, P1S or X1C\u003c\/strong\u003e who are tired of purge waste on multi-colour prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint farms and small businesses\u003c\/strong\u003e making two-material products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eX2D, P2S or H2D?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eP2S\u003c\/th\u003e\n\u003cth\u003eX2D\u003c\/th\u003e\n\u003cth\u003eH2D\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzles\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2 (mechanical switching)\u003c\/td\u003e\n\u003ctd\u003e2 (independent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e256 mm class\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 260 mm\u003c\/td\u003e\n\u003ctd\u003e325 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temp\u003c\/td\u003e\n\u003ctd\u003e300 °C\u003c\/td\u003e\n\u003ctd\u003e300 °C\u003c\/td\u003e\n\u003ctd\u003e350 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeated chamber\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes, 65 °C\u003c\/td\u003e\n\u003ctd\u003eYes, 65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eFast single-material printing\u003c\/td\u003e\n\u003ctd\u003eClean supports and two materials, desk size\u003c\/td\u003e\n\u003ctd\u003eLarge parts, laser and cutting upgrades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the \u003ca href=\"\/products\/bambu-lab-p2s-3d-printer\"\u003eP2S\u003c\/a\u003e and the \u003ca href=\"\/products\/bambu-lab-h2d-3d-printer\"\u003eH2D\u003c\/a\u003e. Not sure which one fits your work? Send us your part or use case on WhatsApp and we'll help you choose.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume, main nozzle\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume, both nozzles\u003c\/td\u003e\n\u003ctd\u003e235.5 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003e0.4 mm hardened steel, tool-free quick swap, built-in filament cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruders\u003c\/td\u003e\n\u003ctd\u003eMain: direct drive (PMSM motor). Auxiliary: Bowden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChamber\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65 °C, Cool Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax speed \/ acceleration\u003c\/td\u003e\n\u003ctd\u003e1,000 mm\/s \/ 20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilaments\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, TPU (for AMS), PVA, PET, PA, PC, and CF\/GF-filled PLA, PETG, ABS, ASA, PA6, PAHT, PET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eG3 pre-filter + H12 HEPA + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors and camera\u003c\/td\u003e\n\u003ctd\u003eUp to 31 sensors, 1080p chamber camera with AI monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003e5-inch touchscreen, 1280 × 720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage and connectivity\u003c\/td\u003e\n\u003ctd\u003e8 GB eMMC, USB, Wi-Fi, Bambu Handy app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlicer\u003c\/td\u003e\n\u003ctd\u003eBambu Studio (Windows, macOS, Linux)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003eUnder 50 dB in Silent Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e200–240 V AC, 50\/60 Hz, 1600 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize and weight\u003c\/td\u003e\n\u003ctd\u003e392 × 406 × 478 mm, 16.25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab X2D 3D printer\u003c\/li\u003e\n\u003cli\u003eTextured PEI build plate\u003c\/li\u003e\n\u003cli\u003eExhaust fan bundle\u003c\/li\u003e\n\u003cli\u003eAccessory box and spool holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCombo only:\u003c\/em\u003e AMS 2 Pro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGood to add\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpare hotend: \u003ca href=\"\/products\/bambu-lab-hotend-with-hardened-steel-nozzle-0-4-mm-h2-p2s-x2d-fah060\"\u003e0.4 mm hardened steel (FAH060)\u003c\/a\u003e, \u003ca href=\"\/products\/bambu-lab-high-flow-hotend-with-hardened-steel-nozzle-0-4-mm-for-h2d-pro-h2s-h2d-p2-fah063\"\u003e0.4 mm High Flow (FAH063)\u003c\/a\u003e or \u003ca href=\"\/products\/bambu-lab-hotend-with-hardened-steel-nozzle-0-6-mm-for-h2-p2s-x2d-fah061\"\u003e0.6 mm hardened steel (FAH061)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eA second build plate, such as the \u003ca href=\"\/products\/bambu-lab-diamond-surface-plate-for-a1-p1p-p1s-x1-x1c\"\u003e3D Effect Plate\u003c\/a\u003e (set the plate type manually on X2D)\u003c\/li\u003e\n\u003cli\u003eBambu Lab filament and support material from our \u003ca href=\"\/pages\/3d-printing-hub\"\u003ePrint Studio\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying from Indian Hobby Center\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Bambu Lab printer with GST invoice\u003c\/li\u003e\n\u003cli\u003eShips across India, with free shipping on orders above ₹1,999 using code FREESHIPPING\u003c\/li\u003e\n\u003cli\u003eSetup help and after-sales support on WhatsApp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the X2D the same as the H2D?\u003c\/strong\u003e\u003cbr\u003eNo. The H2D has two fully independent hotends and a larger build volume. The X2D switches between two nozzles on one toolhead and keeps the compact 256 mm footprint of the X1 Carbon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use my old AMS?\u003c\/strong\u003e\u003cbr\u003eThe X2D is designed for AMS 2 Pro and AMS HT. Ask us on WhatsApp before using an older AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need the Combo?\u003c\/strong\u003e\u003cbr\u003eTake the Combo if you want more than two colours, or want dry filament without a separate dryer. For two-material printing, such as PLA plus supports, the standard X2D is enough.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it print nylon and carbon fibre?\u003c\/strong\u003e\u003cbr\u003eYes. The hardened steel nozzle, 120 °C bed and 65 °C chamber handle PA, PC and CF\/GF filaments.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"X2D","offer_id":68227550085163,"sku":"PF004-P","price":98999.0,"currency_code":"INR","in_stock":false},{"title":"X2D Combo with AMS 2 Pro","offer_id":68227550117931,"sku":"PF004-P+SA007","price":132999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/3_22d7f016-9a97-45f6-bc3e-23f9827ae89b.jpg?v=1794332838","url":"https:\/\/www.indianhobbycenter.com\/products\/bambu-lab-x2d-3d-printer","provider":"Indian Hobby Center","version":"1.0","type":"link"}