{"title":"Motor Drivers \u0026 Speed Controllers","description":"\u003cp\u003eDrivers for DC, stepper and servo motors: L298N, L293D, TB6612FNG, DRV8833 and Cytron DC motor drivers, A4988, DRV8825, TMC2208, TB6600 and DM556 stepper drivers, PCA9685 servo drivers, motor shields for Arduino and ESP8266, and PWM DC motor speed controllers.\u003c\/p\u003e","products":[{"product_id":"a4988-stepper-motor-driver-module","title":"A4988 Stepper Motor Driver Module","description":"\u003col\u003e\n\u003cli\u003eSupply Voltage : 8-35 VDC.\u003c\/li\u003e\n\u003cli\u003eCurrent : 1.0A  (no heatsink ).\u003c\/li\u003e\n\u003cli\u003eCurrent : 2.0A (with heat-sinking).\u003c\/li\u003e\n\u003cli\u003elogic input : 3 – 5.5V .\u003c\/li\u003e\n\u003cli\u003eAutomatic current decay mode detection \/ choice.\u003c\/li\u003e\n\u003cli\u003eMixed with slow current decay mode.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling).\u003c\/p\u003e\n\u003cp\u003eA4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988.\u003c\/p\u003e\n\u003cp\u003eThere are no phase sequence tables, the high-frequency control interface programming etc. The application of A4988 interface is very suitable for a complex microprocessor is not available or overload. In the stepping operation, the chopping control in the A4988 automatically selects the current decay mode (slow or mixed). The mix decay current control scheme can reduce the audible motor noise, increased step accuracy, and reduced power consumption.\u003c\/p\u003e\n\u003cp\u003eProvide internal synchronous rectification control circuitry, in order to improve the pulse width modulation (PWM) power consumption during operation.\u003c\/p\u003e\n\u003cp\u003eInternal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO) and crossover current protection. Don’t need special power-up sequencing. A4988 uses surface mount QFN package (ES), the size is 5 mm × 5 mm, nominal overall package height is 0.90 mm, with an exposed thermal pad to enhance the heat dissipation function.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156208398379,"sku":"7096","price":109.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/61RvxhMrrjL._SL1000.jpg?v=1733984549"},{"product_id":"tb6560-stepper-motor-driver-controller","title":"TB6560 Stepper Motor Driver Controller","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Chip: TB6560AHQ\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 10-35V\u003c\/li\u003e\n\u003cli\u003eNominal Voltage: 24V\u003c\/li\u003e\n\u003cli\u003eWith the large heat sink to ensure good heat dissipation\u003c\/li\u003e\n\u003cli\u003e6N137 high-speed OptoCoupler, to ensure a high speed without step out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor driver board is for axis control with Input signal high-speed optocoupler isolation, the large heat sink to ensure good heat dissipation. Stepper motor driver is Semi-flow mode adjustable, semi-flow current adjustable, with a variety of semi-flow model and semi-flow current setting functions.\u003c\/li\u003e\n\u003cli\u003eIt is very easy to use requires no special instructions. The module features Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function.\u003c\/li\u003e\n\u003cli\u003eThis stepper motor driver is featuring TB6560AHQ new original chip. The TB6560AHQ has low voltage shutdown, overheating stop and overcurrent protection circuit to ensure optimal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eFeatures :\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent level by adjustable to meet your various application requirements.\u003c\/li\u003e\n\u003cli\u003eAutomatic semi-flow adjustable.\u003c\/li\u003e\n\u003cli\u003eUsing 6N137 high-speed optical coupling to ensure high speed without losing a step.\u003c\/li\u003e\n\u003cli\u003eBoard printed setup instructions.\u003c\/li\u003e\n\u003cli\u003eUsing a thick fine-toothed radiator, good heat dissipation.\u003c\/li\u003e\n\u003cli\u003eFor 42,57,86 Stepper within 3A  2\/4 -phase \/ 4 wire \/ 6 wire stepper motor, not fit for more than 3A stepper motor.\u003c\/li\u003e\n\u003cli\u003eExcitation Mode: synchronizing, half step, 1\/8 step, 1\/16 step, a maximum of 16 segments.\u003c\/li\u003e\n\u003cli\u003eAutomatic half-decay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003ePackage Content:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x TB6560 Stepper Motor Driver Controller\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156208857131,"sku":"7103","price":499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/TB6560StepperMotorDriverControllerC.jpg?v=1776594143"},{"product_id":"easy-motor-driver","title":"A3967 Stepper Motor Driver","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThis is A3967 Stepper Motor Driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThis is compatible with 4, 6 and 8 wire stepper motors of any voltage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThis stepper motor driver is easy to interface with Arduino\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable current control from 150 mA or phase to 700 mA or phase\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMale header pins are supplied to use with breadboard\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Easy Driver is designed by Brian Schmalz, and is designed around the A3967 IC. This IC enables you to drive bipolar stepper motors that are 4, 6, or 8-wire configurations. The board can either work with 3.3V or 5V systems, making it extremely versatile. Two mounting holes on-board give the user the option to mechanically stabilize the Easy Driver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCoil A+ - H-Bridge 2 Output A. Half of connection point for bi-polar stepper motor coil A. \u003cbr\u003eCoil A- - H-Bridge 2 Output B. Half of connection point for bi-polar stepper motor coil A. \u003cbr\u003eCoil B+ - H-Bridge 1 Output A. Half of connection point for bi-polar stepper motor coil B. \u003cbr\u003eCoil B- - H-Bridge 1 Output B. Half of connection point for bi-polar stepper motor coil B. \u003cbr\u003ePFD - Voltage input that selects output current decay mode. If PFD \u0026gt; 0.6Vcc, slow decay mode is activated. If PFD \u0026lt; 0.21Vcc, fast decay mode is activated. Mixed decay occurs at 0.21Vcc\u0026lt; PFD \u0026lt; 0.6Vcc. \u003cbr\u003eRST - Logic Input. When set LOW, all STEP commands are ignored and all FET functionality is turned off. Must be pulled HIGH to enable STEP control. \u003cbr\u003eENABLE -Logic Input. Enables the FET functionality within the motor driver. If set to HIGH, the FETs will be disabled, and the IC will not drive the motor. If set to LOW, all FETs will be enabled, allowing motor control. \u003cbr\u003eMS2 -Logic Input. See truth table below for HIGH\/LOW functionality. \u003cbr\u003eGND - Ground. \u003cbr\u003eM+ - Power Supply. 6-30V, 2A supply.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156208955435,"sku":"7102","price":319.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM410.jpg?v=1655366265"},{"product_id":"uln2003-stepper-motor-driver-indian","title":"ULN2003 Stepper Motor Driver Board","description":"\u003cul\u003e\n\u003cli\u003eULN2003A motor driver chip\u003c\/li\u003e\n\u003cli\u003eChip all the pins already leads for easy connection to use\u003c\/li\u003e\n\u003cli\u003e5-12V power supply\u003c\/li\u003e\n\u003cli\u003e4-way signal indicator\u003c\/li\u003e\n\u003cli\u003eXH-5P socket can be connected directly 28BYJ-48 Model stepper motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the ULN2003 Driver Module Stepper Motor Driver Board for driving and controlling stepper motors.ULN2003 Stepper Motor Driver Board uses the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v).\u003c\/p\u003e\n\u003cp\u003eIt’s easy to use Arduino or another development platform to drive the stepper motor by this diver board.\u003c\/p\u003e\n\u003cp\u003eThe 5 Line 4 Phase can be driven by an ordinary ULN2003 chip can also be connected in phase 2 development board used for supporting the use of a direct plug and easy to use stepper motor used in the development board. A, B, C, D four-phase LED indicates the status of the stepper motor work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eULN2003A motor driver chip \u003cbr\u003eChip all the pins already leads for easy connection to use \u003cbr\u003e5-12V power supply \u003cbr\u003e4-way signal indicator \u003cbr\u003eXH-5P socket can be connected directly 28BYJ-48 Model stepper motor\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156209020971,"sku":"7095","price":75.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM471.jpg?v=1655366268"},{"product_id":"uln2003-stepper-motor-driver-board","title":"ULN2003 Stepper Motor Driver Board (Micro)","description":"\u003cul\u003e\n\u003cli\u003e5-12V power supply \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4-way signal indicator \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChip all the pins have Input leads Mounted for easy connection to use \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eXH-5P socket can be connected directly 28BYJ-48 Model stepper motor \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 32 x 18 x 11mm (LxWxH) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 3 gm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is ULN2003 Driver Module Stepper Motor Driver, small size and easy to use. It uses the ULN2003 driver chip to amplify the control signal from the Arduino. This Ultra Lightweight and cheap option commonly used to run and control the small applications stepper motors.\u003c\/p\u003e\n\u003cp\u003eNote: Color of PCB of may vary according to Manufacturer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO CONTROL STEPPER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003eThe step motor is to a machine to convert pulse to angular displacement. So if you give stepper driver a certain pulse signal, it will drive step motor to a certain angle. you can control the angle the stepper moved by the number of the pulse. And you also can control the speed of the stepper rotate by the frequency of the pulse. The following picture is the schematic of the stepper driver.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156209086507,"sku":"IHCM125","price":59.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM140.jpg?v=1655366269"},{"product_id":"l9110-2-dc-motor-driver-board","title":"L9110 Dual DC Motor Driver Board","description":"\u003cul\u003e\n\u003cli\u003eL9110S-chip motor drive \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 2.5-12V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe maximum operating current of 0.8A \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrive two DC motors or a 4-wire 2-phase stepping motor. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltra-small size, suitable for assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots.\u003c\/p\u003e\n\u003cp\u003eThis tiny module has two independent L9110S motor driver chips which can each drive up to 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers.\u003c\/p\u003e\n\u003cp\u003eA set of male header pins is used to connect this module to your robot?s microcontroller brain. The motors are attached via two sets of screw terminals. A PWM Pulse Width Modulation signal is used to control the speed of a motor and a digital output is used to change its direction. This module can also be used to drive a single four-line two-phase stepper motor. Four holes make this board easy to mount onto your robot or another project.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156209152043,"sku":"IHCM141","price":99.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM141.jpg?v=1655366272"},{"product_id":"l293d-motor-control-driver-board","title":"L293D Motor Driver Module Board","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eL293D motor driver IC.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eVoltage Range: 4.5 V to 36 V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSeparate Input-Logic Supply\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ePin compatible with L293D\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eInternal ESD Protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMale burg stick connectors for supply, ground and input connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eScrew terminal connectors for easy motor connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eOn Board LM7805 Voltage Regulator\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"text-black\"\u003e\u003cstrong\u003eL293D Driver Board:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text-black\"\u003eThis Motor Driver Board is designed to Work with L293D IC. The L293D is a popular motor driver IC designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. With Terminal Blocks for connecting motors \u0026amp; power supply and Berg Sticks for control signals from microcontroller. This can control 2 DC Motors, their direction using control lines and their speed using PWM.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eWide Supply-Voltage Range: 4.5 V to 36 V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eSeparate Input-Logic Supply\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003ePin compatible with L293D\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eInternal ESD Protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eThermal Shutdown\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eHigh-Noise-Immunity Inputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eOutput Current 0.6 A Per Channel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003ePeak Output Current 2 A Per Channel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eOutput Clamp Diodes for Inductive Transient Suppression. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eThis motor driver is perfect for robotics and mechatronics projects for controlling motors from microcontrollers, switches, relays, etc. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003ePerfect for driving DC and Stepper motors for micro mouse, line following robots, robot arms, etc.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156209184811,"sku":"6989","price":99.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/4_L293D_4_Channel_DC_Motor_Driver.png?v=1793805898"},{"product_id":"drv8825-stepper-motor-driver-with-aluminum-heat-sink-for-3d-printer","title":"DRV8825 Stepper Motor Driver with Aluminium Heat Sink for 3D Printers","description":"\u003col\u003e\n\u003cli\u003eSupply Voltage: 8.2 – 42 VDC.\u003c\/li\u003e\n\u003cli\u003eCurrent Capacity : 2.2A max(24V).\u003c\/li\u003e\n\u003cli\u003eContinuous current per phase: 1.5 A.\u003c\/li\u003e\n\u003cli\u003eMinimum Logic voltage: 2.5V.\u003c\/li\u003e\n\u003cli\u003eMaximum Logic Voltage: 5V.\u003c\/li\u003e\n\u003cli\u003eMicrostep resolutions: full, 1\/2, 1\/4, 1\/8, 1\/16, and 1\/32.\u003c\/li\u003e\n\u003cli\u003eDimensions : 15 x 20 mm.\u003c\/li\u003e\n\u003cli\u003eWeight: 4 gm.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eMicrostep resolutions: full, 1\/2, 1\/4, 1\/8, 1\/16, and 1\/32.\u003c\/li\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003eIntelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eCan interface directly with 3.3 V and 5 V systems\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156263350315,"sku":"7098","price":129.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/51V9Xmiff6L._SL1010.jpg?v=1655366980"},{"product_id":"double-bts7960-43a-h-bridge-high-power-stepper-motor-driver-module","title":"BTS7960 43A H-Bridge DC Motor Driver Module","description":"\u003cp\u003eThe \u003cstrong\u003eBTS7960 H-Bridge DC Motor Driver Module\u003c\/strong\u003e provides high-current PWM control for DC motor projects. Built around two BTS7960 high-current half-bridge devices, it combines a compact motor-drive interface with logic-level inputs, current-sense diagnostics and integrated protection.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-current H-bridge design:\u003c\/strong\u003e Two BTS7960 half-bridge devices form a full H-bridge for DC motor drive applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.5–27V motor supply:\u003c\/strong\u003e Supports the supply-voltage range stated for this module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM control up to 25kHz:\u003c\/strong\u003e Includes active freewheeling for PWM motor-drive operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller interface:\u003c\/strong\u003e Logic-level inputs simplify connection to a suitable controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent-sense diagnostics:\u003c\/strong\u003e Status-flag diagnosis and current-sense capability help monitor driver operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated protection:\u003c\/strong\u003e Overtemperature shutdown with latch behaviour, overvoltage lockout, undervoltage shutdown, overcurrent and short-circuit protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard indication:\u003c\/strong\u003e Includes a 5V power indicator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver family: BTS7960 \/ BTS7960B, NovalithIC.\u003c\/li\u003e\n\u003cli\u003eConfiguration: Two high-current half bridges forming one H-bridge.\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 5.5–27V.\u003c\/li\u003e\n\u003cli\u003eTypical current-limitation level: 43A.\u003c\/li\u003e\n\u003cli\u003ePWM frequency capability: Up to 25kHz.\u003c\/li\u003e\n\u003cli\u003eTypical path resistance: 16 mΩ at 25°C.\u003c\/li\u003e\n\u003cli\u003eTypical quiescent current: 7µA at 25°C.\u003c\/li\u003e\n\u003cli\u003eIntegrated functions: Dead-time generation and adjustable slew rates for EMI optimisation.\u003c\/li\u003e\n\u003cli\u003eEach driver device integrates a P-channel high-side MOSFET, an N-channel low-side MOSFET and driver circuitry. The P-channel high-side design eliminates the need for a charge pump, helping reduce EMI.\u003c\/li\u003e\n\u003cli\u003eSwitched-mode current limitation helps reduce power dissipation during overcurrent conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlan Your Motor-Control Build\u003c\/h2\u003e\n\u003cp\u003eUse this module as the power-driver stage between a suitable controller and a DC motor. Before connecting your project, verify the module pinout, logic requirements, motor starting and stall current, wiring and cooling arrangements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent-rating note:\u003c\/strong\u003e The 43A figure is the stated typical current-limitation level, not a guaranteed continuous operating current for the assembled module. Select the operating load according to the module's thermal limits and your cooling arrangement. Protection features do not replace correct wiring and load selection.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156268986411,"sku":"6993","price":369.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/51dDDv6AfGL.jpg?v=1655367066"},{"product_id":"16-channel-12-bit-pwm-servo-driver-i2c-interface-pca9685-for-arduino-raspberry-pi","title":"PCA9685 16-Channel 12-bit PWM Servo Driver (I2C) for Arduino and Raspberry Pi","description":"\u003cul\u003e\n\u003cli\u003eAdjustable frequency PWM up to about 1.6 KHz\u003c\/li\u003e\n\u003cli\u003e12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate\u003c\/li\u003e\n\u003cli\u003eConfigurable push-pull or an open-drain output\u003c\/li\u003e\n\u003cli\u003eThe output enable pin to quickly disable all the outputs\u003c\/li\u003e\n\u003cli\u003eTerminal block for power input Reverse polarity protection on the terminal block input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM\/Servo Driver. \u003cbr\u003eYou can control 16 free-running PWM outputs with 16-Channel 12-Bit PWM\/Servo Driver using only 2 pins. You can even chain up 62 breakouts to control up to 992 PWM outputs. \u003cbr\u003eIt’s an I2C-controlled PWM driver with a built-in clock. That means you do not need to continuously send it to signal to tie up your microcontroller, it is completely free running! \u003cbr\u003eIt is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs. This is good when you want to control white or blue LEDs with 3.4+ forward voltages. 6 address select pins so you can wire up to 62 of these on a single I2C bus, a total of 992 outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable frequency PWM up to about 1.6 KHz\u003c\/li\u003e\n\u003cli\u003e12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate\u003c\/li\u003e\n\u003cli\u003eConfigurable push-pull or an open-drain output\u003c\/li\u003e\n\u003cli\u003eThe output enable pin to quickly disable all the outputs\u003c\/li\u003e\n\u003cli\u003eTerminal block for power input\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection on the terminal block input\u003c\/li\u003e\n\u003cli\u003eGreen power-good LED\u003c\/li\u003e\n\u003cli\u003e3 pin connectors in groups of 4 so you can plug in 16 servos at once\u003c\/li\u003e\n\u003cli\u003eChainable design\u003c\/li\u003e\n\u003cli\u003eA spot to place a big capacitor on the V+ line\u003c\/li\u003e\n\u003cli\u003e220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156269936683,"sku":"7189","price":379.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/71Q0VRSqLKL._SL1500.jpg?v=1655367069"},{"product_id":"node-mcu-motor-shield-board-l293d-for-esp-12e-from-esp8266","title":"L293D Motor Shield for ESP8266 NodeMCU ESP-12E","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eL293D Wifi Motor Drive Shield For Arduino Node Mcu ESP8266 ESP-12E\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor Power Range: 4.5V ~ 36V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eControl supply range: 4.5V ~ 9V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLogical operating current Iss: ≤60mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDriving part of the work current Io: ≤1.2A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum power dissipation: 4W (T = 90 ℃)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch3\u003e\u003cspan\u003eL293D Motor Driver Board For ESP8266 WiFi NodeMcu Lua ESP12E\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eL293D Wifi Motor Drive Shield For Arduino Node Mcu ESP8266 ESP-12E. L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU. This shield board is driven by the power full-bridge chip L293DD which can directly drive 2-channels DC motors or one-channel stepper motor. In this motor shield board, the IO port of ESP-12E Dev Kit is used as the control port. The logic chip configured inside can finish IC driven. Thus, the shield board has four ports: D1, D2, D3, and D3, which are used as PWMA(motor A), PWMB (motor B), DA (direction of motor A), and DB (direction of motor B), respectively. In addition, this shield board has many pins, such as VIN, 3.3V, DIO, AIO, SDIO, UART, SPI, RST, and EN, thus can conveniently connect all kinds of sensors (e.g., temperature and humidity, buzzer, light, relay sensor, etc.). This Product is known as L293D Motor Driven Expansion Board for NodeMcu Lua Wifi Board, L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E, L293D Motor Driver Board, ESP8266 WiFi NodeMcu Lua ESP12E.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: Excluding of the ESP8266 WiFi NodeMcu Board.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eESP12 DEV KIT development board expansion module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLead ESP12 DEV KIT all the features of pins: SPI, UART, GPIO, AI, and 3.3V power connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExtend two-way motor-driven, two-way direct-drive motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eonboard power switch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor power, control power separation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures\/Specs\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMotor power supply Range: 4.5V ~ 36V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eControl Power Range: 4.5V ~ 10V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLogic Operating Current: ≤60mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDrive part of the work current Io: ≤1.2A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum Power Dissipation: 4W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDrive Type: Dual high-power H-bridge driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorking Temperature: -25℃ ~ +125℃\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLength: 60 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 45 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeight: 13 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApprox Weight: 20 gm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003eApplication:\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cspan\u003eDatasheet: L293D Motor Driver Board For ESP8266 WiFi NodeMcu Lua ESP12E\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cspan\u003ePackage includes:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x L293D Motor Driver Board For ESP8266 WiFi NodeMcu Lua ESP12E\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eNote: Product Images are shown for illustrative purposes only and may differ from the actual product.\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156269969451,"sku":"4529","price":169.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/L293D-Motor-Driver-Board-For-ESP8266-WiFi-NodeMcu-Lua-ESP12E--1.jpg?v=1787124612"},{"product_id":"motor-stepper-servo-robot-shield-v2-with-pwm-driver-shield-for-arduino","title":"TB6612FNG 2-Channel Motor and PCA9685 16-Channel Servo Shield for Arduino","description":"\u003cspan data-mce-fragment=\"1\"\u003e2 connections for 5V servos connected to the high-resolution dedicated timer - no jitter!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotors automatically disabled on power-up.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBig terminal block connectors to easily hook up wires (18-26AWG) and power.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eReset button brought up top.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePolarity protected 2-pin terminal block and jumper to connect external power, for separate logic\/motor supplies.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSize: 68mm * 52mm * 20mm(L*W*H).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eColor: Blue.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNet Weight: 25g.\u003c\/span\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156271673387,"sku":"71673387","price":799.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/TB661211.webp?v=1657878981"},{"product_id":"3in1-motor-driver-shield-for-arduino","title":"L293D 3-in-1 Motor Driver Shield for Arduino","description":"\u003col\u003e\n\u003cli\u003e2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.\u003c\/li\u003e\n\u003cli\u003eCan run motors on 4.5VDC to 25VDC.\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe 3in1 Motor Driver\/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.\u003c\/p\u003e\n\u003cp\u003eThis Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.\u003c\/p\u003e\n\u003cp\u003eThe shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to the PWM outputs of the Arduino.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5 class=\"textblockheader\"\u003e\u003cspan\u003eFirmware\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv class=\"textblock\"\u003e\n\u003col\u003e\n\u003cli\u003eArduino Stepper\/Servo software library with microstepping support.\u003cbr\u003eTo install, click on\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDownload\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the top right corner, select\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ezip\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand uncompress the folder.\u003cbr\u003eRename the folder to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAF-motor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(check that the renamed folder contains the .cpp and .h files) and install it into the Arduino sketches\u003cstrong\u003e\/libraries\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efolder.\u003cspan\u003e \u003c\/span\u003eFor information on how to use and install libraries, see our tutorial!\u003cspan\u003e \u003c\/span\u003eThis version now works with the Mega. Public domain!\u003c\/li\u003e\n\u003cli\u003eAccelStepper library\u003cspan\u003e \u003c\/span\u003ewith AFMotor support. This library allows for advanced stepper control including acceleration and deceleration, and concurrent stepper control!\u003cbr\u003eTo install, click on\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDownload\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the top right corner, select\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ezip\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand uncompress the folder.\u003cbr\u003eRename the folder to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAF-motor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(check that the renamed folder contains the .cpp and .h files) and install it into the Arduino sketches\u003cstrong\u003e\/libraries\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efolder.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePower for the motors can be supplied from the Arduino boards DC Jack (normally 9V) or from the 2-pin EXT-PWR terminal block. If you are supplying power from the EXT_PWR terminal block you should remove the PWR jumper or you could damage the shield and the Arduino board.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003ePull-down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003eBig terminal block connectors to easily hook up wires (18-26AWG) and power\u003c\/li\u003e\n\u003cli\u003eArduino reset button brought up top\u003c\/li\u003e\n\u003cli\u003e2-pin terminal block and jumper to connect external power, for separate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eTested compatible with Arduino Mega 1280 \u0026amp; 2560, Diecimila, Duemilanove, and UNO\u003c\/li\u003e\n\u003cli\u003eDownload the easy-to-use Arduino software library, check out the examples and you’re ready to go!\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156280586283,"sku":"0151","price":169.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Screenshot-80.png?v=1655367274"},{"product_id":"tb6600-stepper-motor-driver-controller","title":"TB6600 Stepper Motor Driver Controller","description":"\u003cul\u003e\n\u003cli\u003eInput Current: 0~5A \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput Current: 0.5~4.0A \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl Signal: 3.3~24V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower (MAX): 160W \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMicro Step: 1, 2\/A, 2\/B, 4, 8, 16, 32 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature: -10～45℃ \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eH bridge bipolar constant current drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003eTB6600 Arduino stepper motor driver has a wide range of power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. The stepper driver supports speed and direction control.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156292677675,"sku":"7104","price":479.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/6x.png?v=1655367465"},{"product_id":"l298n-2a-based-motor-driver-module","title":"L298N 2A Dual H-Bridge Motor Driver Module","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent Sense for each motor.\u003c\/li\u003e\n\u003cli\u003eHeatsink for better performance.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower-On LED indicator.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble H bridge Drive Chip:\u0026amp;nbsp;L298N.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Voltage(VDC): 5~35\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePeak Current (A): 2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContinuous Current (A): 0-36mA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo. of Channels: 2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOver-Current Protection (A): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermal Protection: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eL298N 2A Based Motor Driver is a high power motor driver perfect for driving DC Motors and Stepper Motors\u003c\/p\u003e\n\u003cp\u003eIt uses the popular L298 motor driver IC and has an onboard 5V regulator which it can supply to an external circuit. It can control up to 4 DC motors, or 2 DC motors with directional and speed control.\u003c\/p\u003e\n\u003cp\u003eThis motor driver is perfect for robotics and mechatronics projects and perfect for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micro mouse, line following robots, robot arms, etc.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eUsage:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003eH-bridges are typically used in controlling motors speed and direction but can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays. \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum motor supply current: 2A per motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent Sense for each motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHeatsink for better performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003ePower-On LED indicator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eDouble H bridge Drive Chip: L298N.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156298739755,"sku":"6990","price":159.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/SS.jpg?v=1655367553"},{"product_id":"3v-6v-12v-24v-35v-pwm-dc-motor-speed-regulator","title":"5A PWM DC Motor Speed Controller (4.5-35V)","description":"\u003col\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMini DC 4.5-35V 5A PWM Motor Speed Controller.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eWide voltage DC motor speed controller.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC4.5V-35V\u003c\/li\u003e\n\u003cli\u003eOutput current: 0-5A\u003c\/li\u003e\n\u003cli\u003eOutput power: 90W (max)\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePWM duty cycle: 1% -100%.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e3V 6V 12V 24V 35V PWM 5A DC Motor Speed Regulator is a Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMini DC 4.5-35V 5A PWM Motor Speed Controller.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eWide voltage DC motor speed controller.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC4.5V-35V\u003c\/li\u003e\n\u003cli\u003eOutput current: 0-5A\u003c\/li\u003e\n\u003cli\u003eOutput power: 90W (max)\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePWM duty cycle: 1% -100%.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156302180395,"sku":"7026","price":129.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/4.5-35v-5a-pwm-adjustable-dc-motor-speed-regulator-control-governor-switch-module4-1000x1000.webp?v=1789036624"},{"product_id":"pwm-6v-12v-24v-28v-3a-dc-motor-speed-regulator","title":"PWM 3A DC Motor Speed Regulator","description":"\u003cul\u003e\n\u003cli\u003eVoltage range: DC6V – 28V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent range: Within 3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch function: None\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed range: 0-100%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis 1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator allows controlling the speed of a motor with fully adjustable 0%-100%. The motor speed controller can easily provide a continuous current of 3A to your DC motor or other DC load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor+: Motor Positive Terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMotor-: Motor Negative terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePower+: DC 6V – 28V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed of a motor is fully adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eDC 6V 12V 24V 28V Supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156302245931,"sku":"7025","price":199.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/1203b-6v-12v-24v-28v-3a-pwm-dc-motor-speed-controller-speed-original-imafwbuhrhehsghh.jpg?v=1781869848"},{"product_id":"pwm-10a-12v-40v-dc-motor-speed-control-switch-governor","title":"10A PWM DC Motor Speed Controller 12-40V","description":"\u003cul\u003e\n\u003cli\u003eInput supply voltage: DC 12V-40V\u003c\/li\u003e\n\u003cli\u003eThe maximum output power: 400W\u003c\/li\u003e\n\u003cli\u003eThe maximum continuous output current:8A\u003c\/li\u003e\n\u003cli\u003eStatic Current:0.02 A ( Standby )\u003c\/li\u003e\n\u003cli\u003ePWM frequency: 13kHz\u003c\/li\u003e\n\u003cli\u003eDuty Cycle adjustable: 10%-100%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003cp\u003eThe DC Motor Speed Controller allows controlling direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. The circuit also includes a 10A fuse, with the reverse connection of power supply and control voltage over-voltage protection function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis can NOT be used to the BRUSHLESS motor. The controller is NOT reverse-polarity protected and will be damaged if it connects the supply voltage with the wrong polarity. \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/h4\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eControl the speed of a DC motor with this controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficiency, high torque, low heat generating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eWith reverse polarity protection, high current protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eControl voltage over-voltage protection function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eThe overload and short circuit protecting current is 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eWorking Voltage: DC 12V – DC 40V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eControl Power:0.01 – 400W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eStatic Current:0.02 A ( Standby ).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003ePWM Duty Cycle:10% -100%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n1 x 12V-40V10A DC Motor PWM Speed Control Switch Governor\u003cbr\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156316729387,"sku":"16729387","price":259.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/12v-40v-10a-dc-motor-pwm-speed-control-switch-governor-1-800x800-2.jpg?v=1655367895"},{"product_id":"l298n-dc-stepper-motor-drive-controller-board-module-four-motor-drive","title":"L298N V3 4-Channel DC Motor Driver Module","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThis drive module integrates the two L298N chip, it can drive four DC motors (reversible, can use PWM to control speed) or two stepper motors.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIt integrates LM2596 DC-DC voltage regulator chip (which can output 5V, can power for the SCM, servos, sensor, router. the battery can up to 2A).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIn addition to the two pieces L298N chip on the board, and then integrate a ULN2003 can drive one more stepper motor, or four DC motors (start and stop, not reversible). For example, when making fire-fighting robot, it can control extinguishing fan, not need external circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIntegrated servo interface, leads to the signal terminal, it’s convenient to dock with SCM.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIntegrated USB connector, which can be directly powered by plugging into the router.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApply to W703N, WIFI car router modification. inserting USB, leading out the RXD TXD through pins, it is convenient to communicate with its own SCM.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5V DC output leading-out terminal (terminal, pin), it’s convenient to power for the 5V external devices.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40176656678955,"sku":"56678955","price":969.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/L298MOTORDRIVER2.jpg?v=1656134188"},{"product_id":"dc-stepper-motor-hat-for-raspberry-pi-mini-kit","title":"Adafruit DC \u0026 Stepper Motor HAT","description":"\u003cp data-mce-fragment=\"1\"\u003eLet your robotic dreams come true with the new DC+Stepper Motor .This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSince the Raspberry Pi does not have a lot of PWM pins, we use a\u003cstrong\u003e \u003c\/strong\u003efully-dedicated PWM driver chip\u003cstrong\u003e \u003c\/strong\u003eonboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA \u0026amp; SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or Hat to the same pins.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":40182357655595,"sku":"57655595","price":3500.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Capture_28807d2b-aa7d-4125-a4d2-f2245f78aabb.png?v=1656399754"},{"product_id":"brushless-motor-controller-dc-12-36v-500w-pwm-driver-board","title":"Brushless Motor Controller DC 12-36V 500W PWM Driver Board (Green)","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrive plate type: JYQD_V6.3E2\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVoltage range: 12V-36V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak current: 20A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003ePWM speed control: PWM frequency 1-20KHZ\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eDuty cycle: 0-100%\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrive power: ≤ 500W (related working voltage)\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40213992308779,"sku":"456135","price":1299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/DC-12-36V-500W-PWM-Brushless-Motor-Controller-Board.jpg?v=1657273030"},{"product_id":"1-8v-12v-2a-dc-motor-pwm-speed-regulator","title":"1.8V–12V 2A PWM DC Motor Speed Regulator","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\" style=\"color: #333e48; font-family: Inter, 'Open Sans', HelveticaNeue-Light, 'Helvetica Neue Light', 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;\" data-mce-style=\"color: #333e48; font-family: Inter, 'Open Sans', HelveticaNeue-Light, 'Helvetica Neue Light', 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;\"\u003eThe DC Motor PWM Speed Regulator 1.8V, 3V, 5V, 6V, 12V-2A speed control switch function for DC Motors allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of 2A to your DC motor or other DC load.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 style=\"box-sizing: border-box; letter-spacing: normal; margin-top: 0px; margin-bottom: 1em; line-height: 1.043em; color: #333e48; font-family: Inter, 'Open Sans', HelveticaNeue-Light, 'Helvetica Neue Light', 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\u003cstrong style=\"box-sizing: border-box; letter-spacing: 0px; font-weight: bold; margin-bottom: 0px;\"\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col style=\"box-sizing: border-box; letter-spacing: normal; margin-top: 0px; margin-bottom: 1rem; padding-left: 2rem; color: #333e48; font-family: Inter, 'Open Sans', HelveticaNeue-Light, 'Helvetica Neue Light', 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\n\u003cli style=\"box-sizing: border-box; letter-spacing: 0px;\"\u003eOutput current : 2A(Max).\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; letter-spacing: 0px;\"\u003eWith re settable fuse.\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; letter-spacing: 0px;\"\u003eEquipped with LED indicator.\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; letter-spacing: 0px; margin-bottom: 0px;\"\u003ePotentiometer with switch function for PWM adjustment.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40232655487019,"sku":"7024","price":79.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/1Q.webp?v=1657960071"},{"product_id":"pwm-motor-speed-controller-2000w-40a-9-50v-dc-electronic-speeder","title":"40A 2000W PWM DC Motor Speed Controller 9-50V","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum Output Power: 2000W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum Output Current: 40A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower Supply: 9-50VDC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh Quality ABS Case\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eThis 9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12\/24\/36\/50V is used to control the speed of DC motors from 9V to 50V with a maximum power of 2000W this controller can provide up to 40A of current depending on the power supply. The board comes with a protective housing made from ABS plastic. The controller has 6 high-quality NCE7190A MOSFET’s which are connected to the individual heatsinks.\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40340807974955,"sku":"7041","price":519.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/pwm40a.jpg?v=1660374897"},{"product_id":"hg7881-4-channel-dc-2-4-10v-h-bridge-motor-driver-broad","title":"HG7881 4-Channel H-Bridge DC Motor Driver Board (2.4-10V)","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOperating  voltage: 2.5-12V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSuitable for: motor operating voltage 2.5V-12V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating current: 0.8A maximum\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo. of channel: 4\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis HG7881 4-Channel dc motor driver module comes with its own four L9110S chip. It can drive 4 DC or Can drive two 4-wire 2-phase stepping motor.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePerfect for driving DIY smart car robot motor.\u003c\/li\u003e\n\u003cli\u003eYou can drive 4 DC motors or two 4-wire 2-phase stepping motor.\u003c\/li\u003e\n\u003cli\u003eSuitable Motor range: between motor operating voltage 2.5v-12V, the maximum operating current of 0.8A.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40371252559915,"sku":"52559915","price":399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/HG7881-4-Channel.webp?v=1661601818"},{"product_id":"l298n-mini-motor-driver-module","title":"MX1508 Mini Dual H-Bridge DC Motor Driver Module (L298N Mini)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe dual H-bridge motor drive can operate two DC motors or a four-wire two-phase step motor.\u003c\/li\u003e\n\u003cli\u003eThe module supply voltage is 2V-10V.\u003c\/li\u003e\n\u003cli\u003eThe signal input voltage is 1.8-7V.\u003c\/li\u003e\n\u003cli\u003eSingle operation current 1.5A, peak current 2.5A, low standby current (less than 0.1uA).\u003c\/li\u003e\n\u003cli\u003eThe built-in common-mode transmission will not malfunction when the input pin slide is released.\u003c\/li\u003e\n\u003cli\u003eInternal thermal protection circuit with hysteresis effect (TSD), without worrying about engine shutdown.\u003c\/li\u003e\n\u003cli\u003eProduct Size: 24.7 * 21 * 5mm (length, width, height), very small size.\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 2 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIdeal for motorized drive modules, battery powered smart cars, toy cars, robots. The supply voltage can be 2V ~ 10V, two DC motors or 4-wire 2-phase stepper motors can be operated, forward or reverse can be reached, it is possible to set the rotation speed. Each can provide 1.5A continuous current, peak current up to 2.5A, thermal protection and can be automatically restored.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in low-circuit-resistance MOS switch operation, minimal heat, coolant-free, small size, low power consumption, ideal for pile-running applications.\u003c\/li\u003e\n\u003cli\u003eSmall size, light weight, zero wait current is the ideal choice for your car model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40408093229099,"sku":"6987","price":59.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/l298mini2.jpg?v=1662811284"},{"product_id":"tb6612fng-dual-motor-driver-module-1a","title":"TB6612FNG Dual DC Motor Driver Module – 1.2A per Channel","description":"\u003cp\u003eBring independent speed and direction control to your next robotics project with the \u003cstrong\u003eTB6612FNG Dual DC Motor Driver Module\u003c\/strong\u003e. This compact module drives two DC motors separately, making it a practical choice for projects that need coordinated movement, such as a two-wheel robot.\u003c\/p\u003e\u003ch2\u003eControl two motors independently\u003c\/h2\u003e\u003cp\u003eFine-tune each motor’s speed using PWM and choose clockwise, counterclockwise, short-brake or stop operation. From moving forward to turning in place, separate A and B channel control gives you flexibility in how your project moves.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual motor outputs:\u003c\/strong\u003e independently control two DC motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent capacity:\u003c\/strong\u003e 1.2A average per channel, with a short, single-pulse peak of up to 3.2A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM speed control:\u003c\/strong\u003e supports input frequencies up to 100kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby control:\u003c\/strong\u003e use the STBY pin to place the driver in standby when not needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in protection:\u003c\/strong\u003e thermal shutdown and low-voltage detection circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient connections:\u003c\/strong\u003e pins broken out at 0.1-inch spacing, with inputs on one side and outputs on the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply filtering:\u003c\/strong\u003e decoupling capacitors included on both supply lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver IC:\u003c\/strong\u003e TB6612FNG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor channels:\u003c\/strong\u003e 2, labelled A and B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogic supply (VCC):\u003c\/strong\u003e 2.7–5.5V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor supply (VM):\u003c\/strong\u003e maximum 15V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl modes:\u003c\/strong\u003e clockwise, counterclockwise, short-brake and stop\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you connect\u003c\/h2\u003e\u003cp\u003ePull the STBY pin high to take the driver out of standby. Match your motor’s current requirements to the driver’s ratings: the 3.2A figure is a short, single-pulse peak, not a continuous operating current.\u003c\/p\u003e\u003ch2\u003ePackage includes\u003c\/h2\u003e\u003cp\u003e1 × TB6612FNG Dual DC Motor Driver Module.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":41048105844779,"sku":"6985","price":179.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/tb6612fng-dual-motor-driver-module-1a-for-arduino-micro-controller-550x550.webp?v=1710573194"},{"product_id":"pwm-20a-12v-40v-dc-motor-speed-control-switch-governor","title":"20A PWM DC Motor Speed Controller 12-60V","description":"\u003cul\u003e\n\u003cli\u003eInput supply voltage: DC 12V-60V\u003c\/li\u003e\n\u003cli\u003eThe maximum output power: 1200W\u003c\/li\u003e\n\u003cli\u003eThe maximum continuous output current: 20A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWide voltage range from 10-60V for universal compatibility\u003c\/li\u003e\n\u003cli\u003e20A current regulator for high power applications\u003c\/li\u003e\n\u003cli\u003ePWM motor speed control for precise and efficient operation\u003c\/li\u003e\n\u003cli\u003eCompact and durable design for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eEasy to install and use, perfect for DIY enthusiasts\u003c\/li\u003e\n\u003cli\u003eIdeal for controlling motor speed in robotics, automation, and industrial applications\u003c\/li\u003e\n\u003cli\u003eProvides smooth acceleration and deceleration for enhanced motor control\u003c\/li\u003e\n\u003cli\u003eEfficient heat dissipation for reliable and safe operation\u003c\/li\u003e\n\u003cli\u003eCustomizable settings to suit a variety of motor types and load requirements\u003c\/li\u003e\n\u003cli\u003eBacked by our quality guarantee for peace of mind\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e1 x 12V-60V 20A DC Motor PWM Speed Control Switch Governor\u003cbr\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":41164815761451,"sku":"15761451","price":259.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/51uQuucfCdL.jpg?v=1724833332"},{"product_id":"tmc2208-stepper-motor-driver-module","title":"TMC2208 Stepper Motor Driver Module With Heat Sink","description":"\u003cdiv id=\"pd_sub_title\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv id=\"pd_long\"\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic standby current is reduced\u003c\/li\u003e\n\u003cli\u003eSubdivision interpolation and smoothness increases\u003c\/li\u003e\n\u003cli\u003eQuiet operation and smooth action\u003c\/li\u003e\n\u003cli\u003eHigh dynamic motion control chopper\u003c\/li\u003e\n\u003cli\u003eMaterial: 4 layers PCB board\u003c\/li\u003e\n\u003cli\u003eModel: TMC2208\u003c\/li\u003e\n\u003cli\u003eDrive current: 1.4A\u003c\/li\u003e\n\u003cli\u003ePeak current: 2A\u003c\/li\u003e\n\u003cli\u003eVoltage range: 4.75V-36V\u003c\/li\u003e\n\u003cli\u003eSubdivision: 256\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eTMC2208 single-axis stepping motor driver chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision. Flexible microPlyer interpolation unit, this component can provide up to 256 microsteps \/ step resolution, even in systems with limited pulse rate can still achieve perfect sine wave control. Because stealthChop fine music technology is widely used in 3D printing, these components are also designed to be compatible with existing 3D printer electronics without the need for expensive redesign. Both components have pulse\/direction inputs and can operate completely independently. Configuration is achieved through digital input.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"pd_sub_title\"\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv id=\"pd_long\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 x TMC2208v1.2 Stepper Motor Driver Module With Heat Sink \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":41222174474283,"sku":"7117","price":249.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/A22.jpg?v=1766839144"},{"product_id":"mc33886-dual-motor-driver-module-5a","title":"MC33886 5A Dual Motor Driver Module (5-12V)","description":"\u003ch3\u003eMC33886 Motor Driver Module 5-12V 5A\u003c\/h3\u003e\n\u003cp\u003eThis is a high current motor driver board, adopting the MC33886 motor driver chip. The driver board can drive two motors at the same time, the output current can reach 5A, and motor PWM speed regulation can be realized. It has real-time control functions such as braking. It has automatic protection for over current, under voltage and over heating.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorking Voltage: 5V ~ 12V DC\u003c\/li\u003e\n\u003cli\u003eInternal Resistance: 140 million ohm\u003c\/li\u003e\n\u003cli\u003ePWM Frequency: \u0026lt;10KHz\u003c\/li\u003e\n\u003cli\u003eMaximum Current Drive: 5A\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eContinuous Current: 5 A (for each motor)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -40 ~ 125°C\u003c\/li\u003e\n\u003cli\u003eInput control and motor working state (1 high level, 0 means low level)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":41344181862443,"sku":"81862443","price":1699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/51iHWkrdPDL.jpg?v=1740041147"},{"product_id":"smartelex-15d-smart-motor-driver-powered-by-raspberry-pi","title":"SmartElex 15D Smart Dual DC Motor Driver for Raspberry Pi","description":"\u003col\u003e\n\u003cli\u003eSupport motor voltage from 7V to 22V.\u003c\/li\u003e\n\u003cli\u003eOnboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.\u003c\/li\u003e\n\u003cli\u003eOvercurrent and Thermal protection.\u003c\/li\u003e\n\u003cli\u003eMultiple input modes: RC, Analog, PWM, Serial Packetized.\u003c\/li\u003e\n\u003cli\u003eOn-board push buttons for test and manual operation.\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"ui-provider aza azb azc azd aze azf azg azh azi azj azk azl azm azn azo azp azq azr azs azt azu azv azw azx azy azz baa bab bac bae baf bag bah bai baj\" dir=\"ltr\"\u003eType-C USB for SERIAL Mode\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSupplying 15 amps continuous with peak currents up to 30 amps (10 Sec) per channel\u003c\/li\u003e\n\u003cli\u003eSupport motor voltage from 7V to 22V.\u003c\/li\u003e\n\u003cli\u003eOnboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection and indication.\u003c\/li\u003e\n\u003cli\u003eThermal protection.\u003c\/li\u003e\n\u003cli\u003eMultiple input modes: RC, Analog, PWM, Serial Packetized.\u003c\/li\u003e\n\u003cli\u003eOn-board push buttons for test and manual operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSmartElex Smart motor Driver series is that 15D is a dual-channel motor driver that is capable of supplying 15 amps continuously with peak currents up to 30 amps (10Sec) per channel.\u003c\/p\u003e\n\u003cp\u003eThe Driver can be operated on radio control, so no more interfacings and an additional connection are required analog, TTL serial, and PWM. A variety of operating modes including mixed and independent modes in radio operate the driver remotely.\u003c\/p\u003e\n\u003cp\u003eIt comes with analog and PWM modes for operation. Switching between radio controls and PWM mode or switching between any of the 4 modes can be done with an onboard 4-position DPDT mode switch. MOSFETs are switched at 16 KHz to ensure quiet operation and no annoying whining sound. Besides, it is also equipped with a microcontroller unit to provide smart features such as multiple input modes current limit, and thermal protection.\u003c\/p\u003e\n\u003cp\u003eAdditionally, The Driver is equipped with a temperature control feature where If the temperature of the board reaches 80 degrees then motor speed becomes half and speed will be normal once the temperature reaches below 70 degrees. The motor driver will be shut down at 100 degrees.\u003c\/p\u003e","brand":"Smartelex","offers":[{"title":"Default Title","offer_id":41345451458603,"sku":"51458603","price":2699.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/1734772-02-1.jpg?v=1740138885"},{"product_id":"5v-12v-10a-voltage-regulator-pwm-dc-motor-speed-controller-governor-stepless-speed-regulator-led-dimmer-power-controller","title":"5-12V 10A PWM DC Motor Speed Controller and LED Dimmer","description":"\u003cp\u003eThe DC Motor PWM Speed Regulator 10A 5V-16V speed control switch function for DC Motors allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%.The motor speed controller can easily provide a continuous current of 2A to your DC motor or other DC load.\u003cbr\u003eWith a resettable fuse, it can automatically break the connection and automatically recover. With a LED indicator and a rotary switch, convenient to use.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum voltage: 12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMinimum voltage: 5V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContinuous current: 10A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpeed control mode: PWM stepless speed regulation, can also be used to adjust the light\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl mode: speed control potentiometer (open clockwise, continue to rotate clockwise from 1% to 99% speed)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDuty cycle: 0%-99% (0% position is the leftmost state of the potentiometer closed).\u003c\/li\u003e\n\u003cli\u003eWhen the current is turned on, 0.002A (no need to turn off the governor for a long time, there will be no current).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEfficiency: The efficiency is as high as 98%.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShort-circuit maximum current limit: 20A (less than 10 seconds)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":41380847583275,"sku":"7017","price":129.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/MiniPWM10ADCMotorSpeedController1.jpg?v=1742112597"},{"product_id":"tb6612fng-dual-motor-driver-module-1a-tb6612-ultra-small-performance-soldered","title":"TB6612FNG Dual Motor Driver Module 1A, Ultra Small (Soldered)","description":"\u003cp\u003e\u003cspan\u003e1).TB6612FNG used in the design is a new drive device can independently control two bidirectional DC motor, it has a high level of integration, while providing sufficient output capability, operating performance and energy consumption also has advantages, so the integration miniaturization of the motor control system, it can be ideal as a motor driving device.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2).It has a high current MOSFET-H-bridge, dual circuit outputs can drive two motors.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3).TB6612FNG highest output per channel 1.2 A continuous drive current, peak current start up 2A\/3.2 A (continuous pulse \/ single pulse); \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4) kinds of motor control modes: Forward \/ Reverse \/ Brake \/ Stop; PWM supports frequencies up to 100 kHz; standby mode; chip low-voltage detection circuit and thermal shutdown protection circuit; working temperature: -20 ~ 85 °; SSOP24 small SMD package.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eConstitute use TB6612FNG and DC motor control unit MCU and its application in the wheeled mobile robot system in the differential drive. Test runs showed that this combination of devices and SCM applications to achieve a stable and flexible motor drive control. TB6612FNG achieve in terms of integration, performance and output capability to run a better balance for single, dual DC motor design and development of a digital control system.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eSupply voltage (VCC): 5V \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMotor supply voltage (VM): 5V ~ 13.5V\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInterface:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eAIN1.AIN2 Channel A input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAO1.AO2 Channel A Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBIN1.BIN2 Channel B input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBO1.BO2 Channel B Output\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":41441459109931,"sku":"59109931","price":149.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/motor-driver-tb6612fng-module52056297661.jpg?v=1745232979"},{"product_id":"tb6612-d1-motor-driver-shield","title":"TB6612 Motor Driver Shield for Wemos D1 Mini","description":"\u003col\u003e\n\u003cli\u003eInterface: I2C\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: VM = 15V max\u003c\/li\u003e\n\u003cli\u003eOutput current: Iout = 1.2A ( average ) \/ 3.2A ( peak )\u003c\/li\u003e\n\u003cli\u003eStandby control to save power CW \/ CCW \/ short brake \/ stop motor control modes\u003c\/li\u003e\n\u003cli\u003eStandby control mode-I2C mode: control TB6612’s STBY with I2C protocol\u003c\/li\u003e\n\u003cli\u003eIO mode: control TB6612’s STBY with Spin\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cp\u003e1. Interface: I2C\u003cbr\u003e2. Power supply voltage: VM = 15V max\u003cbr\u003e3. Output current: Iout = 1.2A ( average ) \/ 3.2A ( peak )\u003c\/p\u003e\n\u003cp\u003eThis is a  TB6612 D1 Motor Driver Shield. This mini D1 motor uses the Toshiba TB6612 D1 driver chip to control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short break, and stop. The two motor outputs (A and B) can be controlled separately, the speed of each motor is controlled via a PWM input signal with a frequency of up to 100 kHz. The STBY pin must be pulled high to bring the motor out of standby mode.\u003c\/p\u003e\n\u003cp\u003eAll the pins on the TB6612 D1 are split into two 0.1 “latching headers, the pins are arranged such that the input pins are on one side and the output pins are on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStandby control mode\n\u003cul\u003e\n\u003cli\u003e  I2C mode: Control TB6612’s STBY with I2C protocol\u003c\/li\u003e\n\u003cli\u003e  IO mode:  Control TB6612’s STBY with “S” pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eShield reset mode\n\u003cul\u003e\n\u003cli\u003eshort: reset with d1 mini (reset at power on or press d1 mini’s reset button)\u003c\/li\u003e\n\u003cli\u003eopen: reset by “DTR” pin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":42568042283051,"sku":"6986","price":649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/TB6612-D1-Motor-Driver-Shield.jpg?v=1765615904"},{"product_id":"mg995-sg90-dual-steering-engine-controller","title":"Dual Servo Controller Module for MG995 \/ SG90","description":"\u003cp\u003e\u003cspan\u003eThe Dual Steering Engine Controller compatible with MG995 and SG90 servos is an advanced control module designed for precise and synchronized steering in robotic applications. It supports two servo motors, allowing for smooth and accurate steering operations. The controller features easy integration with Arduino and other microcontroller platforms, providing versatile use for hobbyists and professionals alike. It includes fine-tuning options for optimal performance and responsiveness. Built with durability in mind, it ensures reliable operation in various conditions. This controller is ideal for projects requiring coordinated steering mechanisms, such as robotic arms, remote-controlled vehicles, and automated systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports both MG995 and SG90 servo motors.\u003c\/li\u003e\n\u003cli\u003eControls two servos simultaneously.\u003c\/li\u003e\n\u003cli\u003eHigh precision control with fine-tuned adjustments.\u003c\/li\u003e\n\u003cli\u003eSupports various input methods such as PWM (Pulse Width Modulation) signals.\u003c\/li\u003e\n\u003cli\u003eRobust and durable design to handle high torque and load conditions.\u003c\/li\u003e\n\u003cli\u003eOperates at a wide voltage range suitable for MG995 and SG90.\u003c\/li\u003e\n\u003cli\u003eCompact design for easy integration into various projects.\u003c\/li\u003e\n\u003cli\u003eSimple wiring and connection process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1 x  Dual Steering Engine Controller | MG995 SG90\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":42575045328939,"sku":"7193","price":379.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/dual-steering-engine-controller-mg995-sg90-4-1100x1100w.webp?v=1765874335"},{"product_id":"ccm5d-digital-pwm-dc-motor-speed-controller-with-display","title":"CCM5D Digital PWM DC Motor Speed Controller With Display \u0026 Switch","description":"\u003col\u003e\n\u003cli\u003eBuilt-In Display for The Duty Cycle\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6-24 VDC\u003c\/li\u003e\n\u003cli\u003eOperating Current: up to 8A\u003c\/li\u003e\n\u003cli data-end=\"238\" data-start=\"131\"\u003eProduct Frequency: 16 kHz (Motor is quiet at low speed and delivers full-twisting force at low speed)\u003c\/li\u003e\n\u003cli data-end=\"267\" data-start=\"241\"\u003eSpeed Range: 0%–100%\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eThis CCM5D Digital PWM DC Motor Speed Controller With Display is used to control the speed of a DC motor through PWM. This controller comes with a 3 digit 7 segment Red color display, which displays the duty cycle of the PWM from range 0 to 100.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Configure industrial-grade touch buttons, press to enter the sleep state, press again to restart work.\u003cbr\u003e2. The speed of the DC motor can be controlled by adjusting the pulse width modulation (PWM).\u003cbr\u003e3. With a digital display screen, it can display 0-100 numerical value, the operation is simple and convenient.\u003cbr\u003e4. The knob realizes 0-100% adjustment, supports step-less speed regulation, and facilitates positioning speed.\u003cbr\u003e5. PWM DC motor speed regulator, made of high-quality ABS material, sturdy and durable.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":42578037538859,"sku":"7031","price":299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/CCM5D-7031-1.jpg?v=1765983346"},{"product_id":"mx1919-based-motor-driver-module-2-5a-upgraded-version","title":"MX1919 Based Motor Driver Module – 2.5A (Upgraded Version)","description":"\u003cp\u003e\u003cspan\u003eThis MX1919 Based Motor Driver Module 2.5A is a high-power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular MX1919 motor driver IC. It can control up to 2 DC motors with directional and speed control.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis motor driver is perfect for robotics and mechatronics projects and perfect for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micro mice, line-following robots, robot arms, etc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eUsage\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e H-bridges are typically used in controlling motors’ speed and direction but can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eArduino Sketch Considerations: The Arduino code sketch is pretty straightforward. Since there isn’t a library for the MX1919 Motor Controller you just have to declare which pins the controller is hooked to.\u003c\/p\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eDriver Model: MX1919 2.5A\u003c\/li\u003e\n\u003cli\u003eDriver IC: MX1919\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 2-10V\u003c\/li\u003e\n\u003cli\u003eMax Operating Current: 2.5A\u003c\/li\u003e\n\u003cli\u003eDimensions (mm): 31.6 x 30.3x 11\u003c\/li\u003e\n\u003cli\u003eWeight: 12g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e2-Pin Connector for Motor \u0026amp; Power\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Construction\u003c\/li\u003e\n\u003cli\u003eSupports up to 2.5A Current\u003c\/li\u003e\n\u003cli\u003eDrives Two Motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePins\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eMOTOR-A: Motor A Output\u003c\/li\u003e\n\u003cli\u003eMOTOR-B: Motor B Output\u003c\/li\u003e\n\u003cli\u003eIN A1: 1st Input for Motor A\u003c\/li\u003e\n\u003cli\u003eIN A2: 2nd Input for Motor A\u003c\/li\u003e\n\u003cli\u003eIN B1: 1st Input for Motor B\u003c\/li\u003e\n\u003cli\u003eIN B2: 2nd Input for Motor B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003e\u003cspan\u003eApplications :\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDC motor speed and direction control\u003c\/li\u003e\n\u003cli\u003eDual motor control for robotics and automation\u003c\/li\u003e\n\u003cli\u003eArduino and microcontroller-based projects\u003c\/li\u003e\n\u003cli\u003eSmart cars, drones, and RC vehicles\u003c\/li\u003e\n\u003cli\u003eHome automation and IoT motor applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x MX1919 Based Motor Driver Module – 2.5A (Upgraded Version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":43094230073387,"sku":"6980","price":170.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/2.5ADual-channelmotordrivemoduleforwardandreversePWMspeedregulation_720x_fa14be9c-8479-4a61-8cb6-232e46f5529d.jpg?v=1771679805"},{"product_id":"seeed-cytron-mdd3a-3amp-4v-16v-dual-channel-dc-motor-driver","title":"Cytron MDD3A 3A Dual Channel DC Motor Driver (4-16V)","description":"\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eBidirectional control for two brushed DC motor.\u003c\/li\u003e\n\u003cli\u003eControl one unipolar\/bipolar stepper motor.\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: DC 4V to 16V\u003c\/li\u003e\n\u003cli\u003eMaximum Motor Current: 3A continuous, 5A peak\u003c\/li\u003e\n\u003cli\u003eBuck-boost regulator to produce 5V output (200mA max).\u003c\/li\u003e\n\u003cli\u003eButtons for quick testing.\u003c\/li\u003e\n\u003cli\u003eLEDs for motor output state.\u003c\/li\u003e\n\u003cli\u003eInputs compatible with 1.8V, 3.3V, 5V and 12V logic (Arduino, Raspberry Pi, PLC, etc).\u003c\/li\u003e\n\u003cli\u003ePWM frequency up to 20kHz (Output frequency is same as input frequency).\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eLooking for a motor driver for your mobile robot? Want to drive a stepper motor? Worry not! MDD3A is able to control \u003cstrong\u003etwo \u003c\/strong\u003ebrushed DC motors or single bipolar\/unipolar stepper motor from 4V to 16V. With discrete MOSFETs H-Bridge design, this motor driver is able to support 3 Amp per channel continuously without any additional heatsink.\u003c\/p\u003e\n\u003cp\u003eThe onboard test buttons and motor output LEDs allow the functional test of the motor driver in a quick and convenient way without hooking up the host controller. Buck-boost regulator which produces \u003cstrong\u003e5V output\u003c\/strong\u003e from the input as low as 4V can be used to power the host controller.\u003c\/p\u003e\n\u003cp\u003eMDD3A can be controlled with wide input logic voltage range from 1.8V to 12V, it’s compatible with a wide variety of host controller (e.g. Arduino, Raspberry Pi, PLC).\u003c\/p\u003e\n\u003cp\u003eTo prevent the motor driver from damaged by reverse voltage if the battery is connected in the wrong polarity, it is equipped with reverse polarity protection. This is a very common mistake done by a lot of makers even for the very experienced one.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":43329705410603,"sku":"38514118","price":899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/1__70055.1698992801.jpg?v=1773673673"},{"product_id":"dm556-digital-stepper-motor-driver-20v-50v-5-6amp","title":"DM556 Digital Stepper Motor Driver 20V-50V 5.6Amp","description":"\u003col\u003e\n\u003cli\u003e Maximum current: 7.2A, resolution: 0.1A\u003c\/li\u003e\n\u003cli\u003e Impulse response frequency: 200KHz\u003c\/li\u003e\n\u003cli\u003e DC power supply\u003c\/li\u003e\n\u003cli\u003e The input voltage range: 20-50 VDC.\u003c\/li\u003e\n\u003cli\u003e Power supply is greater than 200W. Recommend 20-50 VDC\u003c\/li\u003e\n\u003cli\u003e Operating Temperature: -10℃~45℃\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrostepping Excellence: Up to 256 microsteps for ultra-smooth motion control.\u003c\/li\u003e\n\u003cli\u003eHigh Torque Performance: Generates substantial torque across various speeds.\u003c\/li\u003e\n\u003cli\u003eUser-Friendly Setup: Intuitive interface for easy parameter configuration.\u003c\/li\u003e\n\u003cli\u003eDynamic Current Control: Optimizes current flow for efficiency and reduced heat.\u003c\/li\u003e\n\u003cli\u003eWide Voltage Compatibility: Operates seamlessly within a broad voltage range.\u003c\/li\u003e\n\u003cli\u003eOverheat and Overcurrent Protection: Built-in safeguards for system longevity.\u003c\/li\u003e\n\u003cli\u003eCompact and Durable Build: Robust design for reliable, long-lasting performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":43329721958443,"sku":"DM556","price":1399.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/dm556_stpper_driver.jpg?v=1773674189"},{"product_id":"7v-12v-dc-brushless-motor-driver-controller-board-for-hard-drive-motor-3-4-wire","title":"7-12V Brushless DC Motor Driver Board for Hard Drive Motors (3\/4 Wire)","description":"\u003cp\u003e\u003cspan\u003eThis is a DC7V-12V Brushless Motor Driver Controller Board For Hard Drive Motor 3\/4 Wire. The driver board has voltage reverse connection protection, over-current protection, short circuit protection, simple wiring, and worry-free use. The hard disk motor can be rotated at a voltage of 7-12V. The higher the voltage, the faster the speed, which can reach about 10,000 revolutions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to identify the common port of a 4-wire motor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMeasure the four terminals with the resistance x 1 of the meter.\u003c\/li\u003e\n\u003cli\u003eOne of the terminals and the other three terminals have the smallest and equal resistance, then this terminal is the COM terminal, Which is the common terminal.\u003c\/li\u003e\n\u003cli\u003eThe driver board automatically recognizes the 3-wire or 4-wire brushless motor, and the 4-wire brushless motor can also be disconnected from the COM line.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eDriver voltage: DC7-12V\u003c\/li\u003e\n\u003cli\u003eWorking voltage: ≤1.2A\u003c\/li\u003e\n\u003cli\u003eSpeed adjust:0%-100%\u003c\/li\u003e\n\u003cli\u003eColor: Green and Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003eGood quality Product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePackage Includes:\u003c\/h4\u003e\n\u003cp\u003e1 x 7V-12V DC Brushless Motor Driver Controller Board For Hard Drive Motor 3\/4 Wire\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":43848699412523,"sku":"8546","price":559.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/images_1095256f-6322-4d2c-8005-9b5094099ef8.jpg?v=1774954359"},{"product_id":"cytron-mdd10a-dual-channel-enhanced-10amp-dc-motor-driver-30a-peak","title":"Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak","description":"\u003cp\u003eThis Cytron Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak MDD10A  is the dual-channel version which is designed to drive 2 brushed DC motor with high current up to 13A continuously. Like MD10C, MDD10A also supports locked-antiphase and sign-magnitude PWM signal.\u003c\/p\u003e\n\u003cp\u003eIt is using full solid-state components that result in faster response time and eliminate the wear and tear of the mechanical relay.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eBi-directional control of 2 brushed DC motor.\u003c\/li\u003e\n\u003cli\u003eSupport motor voltage ranges from 5V to 25V.\u003c\/li\u003e\n\u003cli\u003eMaximum current up to 10A continuous and 30A peak (10 seconds) for each channel.\u003c\/li\u003e\n\u003cli\u003eSolid-state components provide faster response time and eliminate the wear and tear of the mechanical relay.\u003c\/li\u003e\n\u003cli\u003eFully NMOS H-Bridge for better efficiency and no heat sink is required.\u003c\/li\u003e\n\u003cli\u003eSpeed control PWM frequency up to 20KHz. Support both locked-antiphase and sign-magnitude PWM operation.\u003c\/li\u003e\n\u003cli\u003e2 activation buttons for fast test on each channel.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e1 x Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak\u003c\/p\u003e","brand":"Cytron","offers":[{"title":"Default Title","offer_id":43886243840043,"sku":"43840043","price":2649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/Cytron_MDD10A_Dual_Channel..png?v=1775297796"},{"product_id":"lv8729-6v-36v-4-layer-substrate-stepper-motor-driver-module-with-heatsink","title":"LV8729 Stepper Motor Driver Module with Heatsink (6-36V)","description":"\u003cp\u003eThe Ultra quiet LV8729  4-layer Substrate Stepper Motor Driver Module with 128 subdivisions is a Best suited Moter Driver for Nema stepper motor whose current is less than 1.5A, which makes the motor steady, quiet, and precise. The LV8729 is a PWM current-controlled micro step bipolar stepping motor driver. This driver can perform eight times of excitation of the second phase to 32W1-second phase and can drive simply by the CLK input. It has a wide range of Operating voltage range i.e. 6V-36V, the proposed voltage is 12V Support subdivisions of 1, 1\/2, 1\/4, 1\/8, 1\/16, 1\/32, 1\/64, 1\/128 with product Process of four-layer PCB board. In the 64 subdivision or 128 subdivision controller, it has a better ultra-quiet effect.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eIn 64 subdivisions or 128 subdivisions to achieve a better ultra-quiet effect. 2. Operating voltage: 6V-36V, the proposed voltage is 12V. 3. The maximum current is 1.5A, the default is 0.8A. 4. Segment: 1, 1\/2, 1\/4, 1\/8, 1\/16, 1\/32, 1\/64, 1\/128. 5. You must add the heat sink to make the heat dissipation better (please be sure to operate with a large fan to help to cool the Module).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel Series:    Heat Sink, LV Series\u003c\/li\u003e\n\u003cli\u003eVoltage Rating (V):    6 to 36VDC\u003c\/li\u003e\n\u003cli\u003eCurrent Rating (A):    0.8 to 1.5\u003c\/li\u003e\n\u003cli\u003eMax. Current (A)    1.8A\u003c\/li\u003e\n\u003cli\u003eOperating Voltage (VDC):    36, (Normal @12V)\u003c\/li\u003e\n\u003cli\u003eSupported segment    1, 1\/2, 1\/4, 1\/8, 1\/16, 1\/32, 1\/64, 1\/128\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDriver current algorithm and its adjustment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver current algorithm: i=Vref\/0.5, the default Vref about 0.4V, so the default current 0.8A, and maximum current 1.5A\u003c\/li\u003e\n\u003cli\u003ePlease DO NOT connect the motors when measuring the voltage, or it's easy to burn the drive.\u003c\/li\u003e\n\u003cli\u003ePlease connect both the power supply and the USB for power when measuring the voltage.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMinor adjustment for potentiometer driver. Adjust it again after measurement to avoid burning driver by excessive current. 5. To increase the current by rotating the potentiometer clockwise slowly, and anticlockwise to reduce.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e1 x LV8729 6V-36V 4-layer Substrate Stepper Motor Driver Module with Heatsink\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":43947835064363,"sku":"7100","price":649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/LV87296V-36VUltraQuiet4-layerSubstrateStepperMotorDriverwithHeatsinkfor3DPrinter...png?v=1776517236"},{"product_id":"hr4988-stepper-motor-driver","title":"HR4988 Stepper Motor Driver","description":"\u003cp\u003e\u003cspan data-spm-anchor-id=\"a2700.details-description.0.i0.79bbH8gnH8gnJJ\"\u003eHR4988 is an easy-to-use micro-stepping motor driver with integrated decoder. It is designed to enable bipolar stepping motors to work in full, half, 1\/4, 1\/8, 1\/16 stepping modes. The step mode is selected by the logic input MSx. The output drive capacity reaches 38V and ±2A. HR4988 contains a fixed decay time current regulator that works in slow decay or mixed decay mode.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eLow on-resistance RDS(ON)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAutomatic detection and selection of current decay mode\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSupport slow decay and mixed decay modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSynchronous rectification function to reduce power consumption\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInternal undervoltage lockout\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOvercurrent protection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eCompatible with 3.3V and 5V logic levels\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eThermal shutdown circuit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eShort circuit protection to ground\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLoad short circuit protection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupport up to 16 segments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e1. The pin headers are installed on the same side as the chip, so the definition of the motherboard header pin sequence is required;\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. MS3 pin header definition, replace with VR, need to set VR reference voltage on the bottom board\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. SLEEP, RESET, 10k pull-up resistors on the board\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4. The upper limit current resistance of the small plate is 0.27 ohms, and the current calculation formula is I=VR\/(8*0.27)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5. The heat sink can be attached to the exposed copper on the front\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e6. VBB voltage: 8~38V.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e7. VDD voltage: 3~5.5V.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e8. Iout output maximum current: 2A\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e9.Maximum power consumption of the module: 8mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e10. Logic input pin level: 0~5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e11. VR pin level: 0.5~4V\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":43947879366699,"sku":"7088","price":199.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/H4478702aefc14105b228b7b3092ce0def.jpg?v=1776520415"},{"product_id":"7semi-30v-15a-single-channel-motor-driver-vikram-3015","title":"7Semi Vikram-3015 Single Channel Motor Driver 30V 15A","description":"\u003cp\u003eThe Vikram-3015 stands as a versatile solution for controlling brushed DC motors, serving as a 30V 15A Single Channel Motor Driver. Its bidirectional control enables efficient operation within a voltage range of 6V to 30V, delivering a continuous current of 15A. User-friendliness is paramount, featuring 3.3V and 5V logic level inputs, along with test buttons and motor output LEDs for convenient testing. Safety measures include overcurrent, over-temperature, and undervoltage protection. The fully NMOS H-Bridge design ensures high efficiency, eliminating the need for a heat sink. With compatibility for PWM and DIR inputs, it suits various host controllers such as Arduino, Raspberry Pi, and PLCs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVOLTAGE REQUIRED (V): 5V TO 12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOPERATIONAL TEMPRATURE: -40°C to +70°C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCONTINOUS CURRENT: 10A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePEAK OUTPUT CURRENT: 15A\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eTOPOLOGY: SINGLE CHANNEL H BRIDGE\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eDIMENSION IN mm: 74 X 44 X 14.92\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eBi-directional control for single channel brushed DC motor\u003c\/li\u003e\n\u003cli\u003eOperating voltage voltage range 6V to 30V\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eContinuous\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ecurrent 15A\u003c\/li\u003e\n\u003cli\u003e3.3V and 5V logic level input.\u003c\/li\u003e\n\u003cli\u003eButtons for quick testing.\u003c\/li\u003e\n\u003cli\u003eLEDs for motor output state.\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection\u003c\/li\u003e\n\u003cli\u003eOver Temperature protection.\u003c\/li\u003e\n\u003cli\u003eUndervoltage shutdown.\u003c\/li\u003e\n\u003cli\u003eFully NMOS H-Bridge for better efficiency and no heat sink is required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"7Semi","offers":[{"title":"Default Title","offer_id":43982240743467,"sku":"MD-10113","price":738.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/MD-10113_003__36058.1757766650.webp?v=1777287336"},{"product_id":"7semi-vikram-1101-dc-motor-driver-breakout-1-8v-11v-input-1a-single-channel","title":"7Semi Vikram-1101 Single Channel DC Motor Driver Breakout, 1A, 1.8-11V","description":"\u003cp data-start=\"89\" data-end=\"755\"\u003eThe 7Semi Vikram-1101 is a compact and easy-to-use motor driver module designed to control a single DC motor. It works with a wide input voltage range from 1.8V to 11V, making it suitable for low-voltage and battery-powered applications. The module can deliver up to 1A continuous current and handle higher peak loads, ensuring smooth motor operation. It supports simple control using input signals and allows speed adjustment using PWM, making it easy to control motor speed and direction. With built-in safety features and a user-friendly design, this module is a great choice for robotics, small automation systems, and general motor control projects.\u003c\/p\u003e\n\u003ch4 class=\"productView-title\"\u003eSpecifications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVOLTAGE REQUIRED (V): 3.3V TO 5V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOPERATIONAL TEMPRATURE: –40°C to +70°C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCONTINOUS CURRENT: 1A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePEAK OUTPUT CURRENT: 2A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDIMENSION IN mm: 13 X 11 X 2.65\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTOPOLOGY: SINGLE H-BRIDGE\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDIMENSION IN mm: 13 X 11 X 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"757\" data-end=\"766\"\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"768\" data-end=\"827\"\u003e• Single Motor Control: Designed to control one DC motor.\u003c\/p\u003e\n\u003cp data-start=\"829\" data-end=\"882\"\u003e• Wide Voltage Range: Works from 1.8V to 11V input.\u003c\/p\u003e\n\u003cp data-start=\"884\" data-end=\"946\"\u003e• 1A Output Current: Suitable for small to medium DC motors.\u003c\/p\u003e\n\u003cp data-start=\"948\" data-end=\"1009\"\u003e• High Peak Current: Supports up to 3A for short durations.\u003c\/p\u003e\n\u003cp data-start=\"1011\" data-end=\"1063\"\u003e• PWM Speed Control: Allows easy speed adjustment.\u003c\/p\u003e\n\u003cp data-start=\"1065\" data-end=\"1132\"\u003e• Simple Operation: Easy connection and control using input pins.\u003c\/p\u003e\n\u003cp data-start=\"1134\" data-end=\"1220\"\u003e• Built-in Protection: Includes over-current, under-voltage, and thermal protection.\u003c\/p\u003e\n\u003cp data-start=\"1222\" data-end=\"1301\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e• Current Limiting: Helps protect motor and circuit without extra components.\u003c\/p\u003e","brand":"7Semi","offers":[{"title":"Default Title","offer_id":43983340273707,"sku":"MD-10118","price":77.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/MD-10118_003__04632.1763530615.webp?v=1777295315"},{"product_id":"7semi-vikram-453r6d-45v-3-6a-drv8871-dual-channel-motor-driver-2-channel","title":"7Semi Vikram-453R6D DRV8871 Dual Channel Motor Driver 45V 3.6A","description":"\u003cp data-start=\"82\" data-end=\"744\"\u003eThe 7Semi Vikram-453R6D is a reliable and easy-to-use motor driver that can control two DC motors at the same time. It works with a wide input voltage from 6.5V to 45V, making it suitable for many types of motors and power setups. Each channel can provide up to 3.6A current, so it can handle medium to high power motors easily. The board uses solid-state design, so it is fast, reliable, and does not wear out like relay-based systems. It supports different control methods, giving flexibility in how you run your motors. This module is a good choice for robotics, automation, and general motor control projects where stable and smooth operation is needed.\u003c\/p\u003e\n\u003cp data-start=\"746\" data-end=\"755\"\u003e\u003cstrong\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"757\" data-end=\"821\"\u003e• Dual Motor Control: Can control two DC motors independently.\u003c\/p\u003e\n\u003cp data-start=\"823\" data-end=\"879\"\u003e• Wide Voltage Range: Works from 6.5V to 45V DC input.\u003c\/p\u003e\n\u003cp data-start=\"881\" data-end=\"947\"\u003e• High Current Support: Up to 3.6A continuous per motor channel.\u003c\/p\u003e\n\u003cp data-start=\"949\" data-end=\"1023\"\u003e• 3V–5V Signal Compatible: Easy to control using standard logic signals.\u003c\/p\u003e\n\u003cp data-start=\"1025\" data-end=\"1110\"\u003e• Fast Solid-State Operation: No mechanical parts, faster response and longer life.\u003c\/p\u003e\n\u003cp data-start=\"1112\" data-end=\"1195\"\u003e• Multiple Control Modes: Supports different PWM control methods for flexibility.\u003c\/p\u003e\n\u003cp data-start=\"1197\" data-end=\"1268\"\u003e• Regenerative Braking: Helps in better motor control and efficiency.\u003c\/p\u003e\n\u003cp data-start=\"1270\" data-end=\"1357\"\u003e• Built-in Protection: Includes over-voltage, under-voltage, and overheat protection.\u003c\/p\u003e\n\u003cp data-start=\"1359\" data-end=\"1417\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e• Status Indicator: Onboard LED shows working condition.\u003c\/p\u003e","brand":"7Semi","offers":[{"title":"Default Title","offer_id":43983341846571,"sku":"MD-10116","price":471.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/MD-10116_003__49536.1757578900.jpg?v=1777295646"},{"product_id":"drv8833-2-channel-dc-motor-driver","title":"DRV8833 2-Channel DC Motor Driver Module","description":"\u003cp\u003e\u003cspan\u003eDRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The board ships populated with SMD components, including the DRV8833, and adds a FET for reverse battery protection. This board is very similar to our DRV8835 dual motor driver carrier in operating voltage range and continuous current rating, but the DRV8835 has a lower minimum operating voltage, offers an extra control interface mode, and is 0.1″ smaller in each dimension; we also carry a DRV8835 dual motor driver shield that is easy to use with an Arduino. The DRV8833 has a higher peak current rating (2 A per channel vs 1.5 A), optional built-in current-limiting, and no need for externally supplied logic voltage. For a smaller, lower-cost, single-channel alternative to this driver, please consider our DRV8838 carrier, which offers a similar operating voltage range and current capabilities. For higher-voltage alternatives to this driver, consider our A4990 and DRV8801 motor driver carriers. This Product is known as Motor Driver Board, Module, Motor Driver, Motor Driver Circuits, Motor Driver Modules\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDRV8833 Motor Driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperating voltage: 2.7V ~ 10.8V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOutput current: 1.2 A continuous (2 A peak) per motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOperating voltage: 2.7V ~ 10.8V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOutput current: 1.2 A continuous (2 A peak) per motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInputs are 3V- and 5V-compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUnder-voltage lockout and protection against over-current and over-temperature\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReverse-voltage protection circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCurrent limiting can be enabled by adding sense resistors (not included)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLength: 16 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 18 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeight: 8 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 5gm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003ePackage Includes:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x DRV8833 2 Channel DC Motor Driver\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":44022077521963,"sku":"7099","price":99.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/DRV8833-2-Channel-DC-Motor-Driver...jpg?v=1787123893"},{"product_id":"tb67s109-stepper-motor-driver-board","title":"TB67S109 Stepper Motor Driver Board","description":"\u003cp\u003e\u003cspan\u003eThis stepper motor driver is based on the Toshiba TB67S109 stepper motor driver chip design. It uses four layers of thick copper precipitation PCB with automatic patch processing. This driver uses the indexer (DIR \/ STEP) control interface. The maximum drive current can reach 4A.Can use 57 stepper motors compatible with Pololu pin definition.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUse four layers of thick copper deposited gold PCB.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAllow full step, half step, 1\/4, 1\/8, 1\/16, 1\/32 step.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum input voltage: 50V; Maximum output current: 4A (in case of good heat dissipation).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEquipped with a large heatsink for better cooling effect.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-efficiency motor current control\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eChip built-in fault detection circuit: thermal shutdown (TSD), overcurrent shutdown (ISD) and reset power (POR).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e1 x TB67S109 Stepper Motor Driver Board\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e1 x Heat Sink with Thermal Pad\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":44022088892459,"sku":"7089","price":699.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/tb67s109-stepper-motor-driver-board-2-400x400.png?v=1777638128"},{"product_id":"mks-lv8729-oc-1-5a-ultra-quiet-stepper-motor-driver-for-3d-printers-and-cnc","title":"MKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC","description":"\u003cp\u003e\u003cspan\u003eMKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC is compatible with a variety of Motherboards like MKS GEN, MKS SBASE with MKS CD can be used in Ramps, can also be used with our simple controller MKS OSC \u003c\/span\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCommon and differential two kinds of input mode, through the No. 6 DIP switch to switch, when No. 6 DIP switch to 1, the input mode is common cathode, the use of white 4pin terminal input; when DIP switch to 0 the input mode is differential, and a total of cathode-common and common anode, see connection diagram.\u003c\/li\u003e\n\u003cli\u003e1\/2 DIP switch for the subdivision settings, 3\/4\/5 DIP switch for the current settings, 6 for the input selection, see connection diagram Press the DIP switch to dial the number is 0, dial ON to 1, subdivision, current, input mode settings are as follows:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-826857\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/ihc-mks-lv8729-oc-1-5a-ultra-quiet-stepper-motor-driver.jpg\" alt=\"MKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver\" width=\"586\" height=\"859\"\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-speed optocoupler, high-speed without losing a step\u003c\/li\u003e\n\u003cli\u003eLV8729 chip, with over-current protection circuit, the maximum support 128 segments\u003c\/li\u003e\n\u003cli\u003eAutomatic half-flow function\u003c\/li\u003e\n\u003cli\u003eA variety of input methods to meet a variety of interface needs\u003c\/li\u003e\n\u003cli\u003eThe use of increased heat sink, good heat dissipation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e1 x MKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":44080261824555,"sku":"7087","price":1499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/IMG_3138068750979374771_jpg.jpg?v=1779260332"},{"product_id":"a4988-stepper-motor-driver-controller-board-red","title":"A4988 Stepper Motor Driver Controller Board (RED)","description":"\u003cp\u003e\u003cspan\u003eThis is Red A4988 Stepper Motor Driver Controller Board. It is m\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003eade of superior material, safe and stable, great for 3D printers.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003eA4988\/DRV8825 can also be used, but pay attention to direction when inserting, otherwise, the driver may be burned down.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003ePin Configurations:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cimg class=\"wp-image-707271\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/ihc-screenshot-2.jpg\" alt=\"Red A4988 Stepper Motor Driver Controller Board Suggest Match 3A004\" width=\"400\" height=\"357\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eCompact size, easy to install and use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAll jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eJm connection motor; Jv Connects 5V and 12V-24V Power Supply.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eE \/S \/D \/G of Jc corresponds to Enable \/Step \/Dir \/Gnd driving signal output on the connection respectively.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e1 x A4988 Stepper Motor Driver Controller Board (RED)\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":44166979059755,"sku":"7097","price":99.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/a4988-stepper-motor-driver-controller-board-red-2_2048x2048_c635b8a9-cac1-490f-a125-8e660d0e4a36.jpg?v=1780728424"},{"product_id":"b1206-digital-stepper-motor-driver-20v-120v-6amp","title":"B1206 Digital Stepper Motor Driver 20V-120V 6Amp","description":"\u003cul\u003e\n\u003cli\u003eModel: B1206\u003c\/li\u003e\n\u003cli\u003eAdjustable current from 1.9A to 6.0A.\u003c\/li\u003e\n\u003cli\u003eSupports half\/full flow and single\/double pulse modes.\u003c\/li\u003e\n\u003cli\u003e0~200 kHz input pulse frequency.\u003c\/li\u003e\n\u003cli\u003eDC 20V to 120V voltage range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv class=\"flex-1 overflow-hidden @container\/thread\"\u003e\n\u003cdiv class=\"h-full\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-defoc-79elbk h-full\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-defoc-1n7m0yu\"\u003e\n\u003cdiv class=\"flex flex-col text-sm md:pb-9\"\u003e\n\u003carticle class=\"w-full scroll-mb-[var(--thread-trailing-height,150px)] text-token-text-primary focus-visible:outline-2 focus-visible:outline-offset-[-4px]\" dir=\"auto\" data-testid=\"conversation-turn-27\" data-scroll-anchor=\"true\"\u003e\n\u003cdiv class=\"m-auto text-base py-[18px] px-3 md:px-4 w-full md:px-5 lg:px-4 xl:px-5\"\u003e\n\u003cdiv class=\"mx-auto flex flex-1 gap-4 text-base md:gap-5 lg:gap-6 md:max-w-3xl\"\u003e\n\u003cdiv class=\"group\/conversation-turn relative flex w-full min-w-0 flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex-col gap-1 md:gap-3\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col flex-grow\"\u003e\n\u003cdiv class=\"min-h-8 text-message flex w-full flex-col items-end gap-2 whitespace-normal break-words text-start [.text-message+\u0026amp;]:mt-5\" dir=\"auto\" data-message-author-role=\"assistant\" data-message-id=\"9ab8a990-9009-47b6-b9c2-66d1717806f8\" data-message-model-slug=\"gpt-4o-mini\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[3px]\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cul\u003e\n\u003cli\u003eMultiple Current Options: Adjustable current settings from 1.9A to 6.0A.\u003c\/li\u003e\n\u003cli\u003eFlexible Pulse Settings: Supports half\/full flow and single\/double pulse settings.\u003c\/li\u003e\n\u003cli\u003eWide Input Frequency: Input pulse frequency range from 0~200 kHz.\u003c\/li\u003e\n\u003cli\u003eLow Power Consumption: Automatically runs at low power when idle.\u003c\/li\u003e\n\u003cli\u003eWide Voltage Range: Operates with DC 20V to 120V power input.\u003c\/li\u003e\n\u003cli\u003eOvercurrent Protection: Built-in protection to prevent damage from excessive current.\u003c\/li\u003e\n\u003cli\u003eCurrent Control: Configurable current modes using SW6, SW7, and SW8.\u003c\/li\u003e\n\u003cli\u003eDirection Control: Allows precise direction control for stepper motor rotation.\u003c\/li\u003e\n\u003cli\u003eError Indicators: Provides error codes (Error 1 to 7) for troubleshooting.\u003c\/li\u003e\n\u003cli\u003eSingle Power Input: Simplifies design with a single power input connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb-2 flex gap-3 empty:hidden -ml-2\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThe B1206 Digital Stepper Motor Driver 20V-120V 6Amp is a highly versatile and efficient driver designed for controlling stepper motors in various applications such as CNC machines, robotics, 3D printers, and other motion control systems. With multiple current options, adjustable pulse settings, and various operating modes, this driver ensures precision, reliability, and efficiency.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb-2 flex gap-3 empty:hidden -ml-2\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb-2 flex gap-3 empty:hidden -ml-2\"\u003e\n\u003ch4\u003eApplications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLaser cutters\u003c\/li\u003e\n\u003cli\u003eLaser markers\u003c\/li\u003e\n\u003cli\u003eHigh precision X-Y tables\u003c\/li\u003e\n\u003cli\u003eLabelling machines, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":67726947287083,"sku":"47287083","price":2349.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/B1206DigitalStepperMotorDriver20V-120V6Amp.avif?v=1791192634"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/collections\/MOTOR_DRIVER.png?v=1769354393","url":"https:\/\/www.indianhobbycenter.com\/collections\/motors-drivers-actuators-motor-driver.oembed?page=3","provider":"Indian Hobby Center","version":"1.0","type":"link"}