{"title":"IOT","description":"","products":[{"product_id":"esp8266-nodemcu-module-cp2102","title":"ESP8266 CP2102 NodeMCU Module","description":"\u003col\u003e\n\u003cli\u003eOpen-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled\u003c\/li\u003e\n\u003cli\u003eArduino-like hardware IO\u003c\/li\u003e\n\u003cli\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network\u003c\/li\u003e\n\u003cli\u003eIntegrated PLL, regulators, DCXO and power management units\u003c\/li\u003e\n\u003cli\u003eOnboard USB to serial chip to easily program and upload codes from the Arduino IDE\u003c\/li\u003e\n\u003cli\u003eEmbeds logic level converter circuits\u003c\/li\u003e\n\u003cli\u003eHas onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!\u003c\/li\u003e\n\u003cli\u003eEasy access to the GPIO pins for easy prototyping\u003c\/li\u003e\n\u003cli\u003eESP-12E Processor\u003c\/li\u003e\n\u003cli\u003eEasy to use breadboard friendly form factor\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\n\u003cp\u003eThe ESP8266 NodeMCU CP2102 board has ESP8266 which is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.\u003c\/p\u003e\n\u003cp\u003eESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including the front-end module, is designed to occupy minimal PCB area.\u003c\/p\u003e\n\u003cp\u003eThe ESP8266 NodeMCU development board ? a true plug-and-play solution for inexpensive projects using WiFi. The module arrives pre-flashed with NodeMCU firmware so they?re ready to go ? just install your USB driver (below). ESP-12 Lua Nodemcu WIFI Dev Board Internet Of Things board contains a full ESP8266 WiFi module with all the GPIO broken out, a full USB-serial interface, and a power supply all on the one breadboard-friendly package.\u003c\/p\u003e\n\u003cp\u003eThis board is pre-flashed with NodeMCU ? a Lua-based firmware for the ESP8266 which allows easy control via a neat scripting language ? Lua ? so you?re ready to go in just a few minutes. \u003cbr\u003eThe ESP-12 Lua NodeMCU WIFI Dev Board Internet Of Things with ESP8266 is an all-in-one microcontroller + WiFi platform that is very easy to use to create projects with WiFi and IoT (Internet of Things) applications.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e11 b\/g\/n Wi-Fi Direct (P2P), soft-AP\u003c\/li\u003e\n\u003cli\u003eIntegrated TCP\/IP protocol stack\u003c\/li\u003e\n\u003cli\u003eUse CH340G to replace the CP2102.\u003c\/li\u003e\n\u003cli\u003eOpen-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled\u003c\/li\u003e\n\u003cli\u003eArduino-like hardware IO\u003c\/li\u003e\n\u003cli\u003eIntegrated low power 32-bit CPU\u003c\/li\u003e\n\u003cli\u003eAdvanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.\u003c\/li\u003e\n\u003cli\u003eCode like Arduino, but interactively in Lua script.\u003c\/li\u003e\n\u003cli\u003eNodejs style network API\u003c\/li\u003e\n\u003cli\u003eEvent-driven API for network applications,\u003c\/li\u003e\n\u003cli\u003ewhich facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.\u003c\/li\u003e\n\u003cli\u003eGreatly speed up your IOT application developing process.\u003c\/li\u003e\n\u003cli\u003eLowest cost WI-FI\u003c\/li\u003e\n\u003cli\u003eLess than WI-FI MCU ESP8266 integrated and easy to prototyping development kit.\u003c\/li\u003e\n\u003cli\u003eWe provide the best platform for IoT application development at the lowest cost.\u003c\/li\u003e\n\u003cli\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network\u003c\/li\u003e\n\u003cli\u003eIntegrated PLL, regulators, DCXO and power management units\u003c\/li\u003e\n\u003cli\u003eOnboard USB to serial chip to easily program and upload codes from the Arduino IDE\u003c\/li\u003e\n\u003cli\u003eEmbeds logic level converter circuits\u003c\/li\u003e\n\u003cli\u003eHas onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!\u003c\/li\u003e\n\u003cli\u003eEasy access to the GPIO pins for easy prototyping\u003c\/li\u003e\n\u003cli\u003eESP-12E Processor\u003c\/li\u003e\n\u003cli\u003eEasy to use breadboard friendly form factor\u003c\/li\u003e\n\u003cli\u003eVoltage Regulator \/ Converter, excellent DC to DC conversion, super-efficient\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156191424555,"sku":"4528","price":329.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/ESP8266-NodeMCU_large_37edabec-b3ea-446b-a409-cde8f7e71c89.jpg?v=1777897428"},{"product_id":"esp8266-12f-wifi-module","title":"ESP-12F ESP8266 Wifi Wireless Module","description":"\u003cul\u003e\n\u003cli\u003eIt is very easy to develop projects with AT commands\u003c\/li\u003e\n\u003cli\u003eSurface Mount Package with 2mm Pitch Pads\u003c\/li\u003e\n\u003cli\u003eMultiple GPIO’s for all your sensor needs\u003c\/li\u003e\n\u003cli\u003eWi-Fi Direct (P2P), soft-AP\u003c\/li\u003e\n\u003cli\u003eIntegrated TCP\/IP protocol stack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Latest ESP-12F ESP8266 Wifi Module AP \u0026amp; Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP\/IP stack and communicating with your 802.11 networks.\u003c\/p\u003e\n\u003cp\u003eIt is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP\/IP stack and MCU (Micro Controller Unit) capability.\u003c\/p\u003e\n\u003cp\u003eESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.\u003c\/p\u003e\n\u003cp\u003eEach ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.\u003c\/p\u003e\n\u003cp\u003eESP8266 Serial Wifi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications \u0026amp; Features of ESP-12F ESP8266 Wifi Wireless Module:-\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCommunication interface voltage: 3.3V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWorking current: 240mA(MAX)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSerial port baud rate: 115200 (default), can be modified to other values by AT command\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSerial communication format: 8N1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWireless Network Mode: station \/ softAP \/ SoftAP + station\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWireless criteria: 802.11 b \/ g \/ n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with ESP-12（ESP-202）\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWIFI @ 2.4 GHz, support for WPA \/ WPA2 security mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIt is very easy to develop projects with AT commands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSurface Mount Package with 2mm Pitch Pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMulitple GPIO’s for all your sensor needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWi-Fi Direct (P2P), soft-AP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated TCP\/IP protocol stack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated PLL, regulators, DCXO and power management units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e+19.5dBm output power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePower down leakage current of \u0026lt;10uA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated low power 32-bit CPU could be used as an application processor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSDIO 1.1\/2.0, SPI, UART\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSTBC, 1×1 MIMO, 2×1 MIMO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eA-MPDU \u0026amp; A-MSDU aggregation \u0026amp; 0.4ms guard interval\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWake up and transmit packets in \u0026lt; 2ms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandby power consumption of \u0026lt; 1.0mW (DTIM3)\u003c\/li\u003e\n\u003cli\u003eBoth SMD and Inline package are available, and the pin pitch is 2.0mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156191490091,"sku":"4452","price":139.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/ESP12F1.jpg?v=1766154550"},{"product_id":"esp8266-01s-wifi-module","title":"ESP-01 ESP8266 Serial WIFI Transceiver Module","description":"\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eWi-Fi Direct (P2P), soft-AP\u003c\/li\u003e\n\u003cli\u003eIntegrated TCP\/IP protocol stack\u003c\/li\u003e\n\u003cli\u003e1MB Flash Memory\u003c\/li\u003e\n\u003cli\u003eDimensions: 25 x 15 x 11 mm (LxWxH)\u003c\/li\u003e\n\u003cli\u003ePCB Thickness: 1mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module is a self-contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever growing, community.\u003c\/p\u003e\n\u003cp\u003eThis module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existing interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.\u003c\/p\u003e\n\u003cp\u003eThere is an almost limitless fountain of information available for the ESP8266, all of which has been provided by amazing community support. In the Documents section below you will find many resources to aid you in using the ESP8266, even instructions on how to transforming this module into an IoT (Internet of Things) solution!\u003c\/p\u003e\n\u003cp\u003eNote: The ESP8266 Module is not capable of 5-3V logic shifting and will require an external Logic Level Converter. Please do not power it directly from your 5V dev board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications and Features:-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e802.11 b\/g\/n \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi Direct (P2P), soft-AP \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated TCP\/IP protocol stack \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated PLLs, regulators, DCXO and power management units \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e+19.5dBm output power in 802.11b mode \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower down leakage current of \u0026lt;10uA \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1MB Flash Memory \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 25 x 15 x 11 mm (LxWxH) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB Thickness: 1mm \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 2 gm \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated low power 32-bit CPU could be used as application processor \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSDIO 1.1 \/ 2.0, SPI, UART \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSTBC, 1×1 MIMO, 2×1 MIMO \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA-MPDU \u0026amp; A-MSDU aggregation \u0026amp; 0.4ms guard interval \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWake up and transmit packets in \u0026lt; 2ms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156191588395,"sku":"4436","price":139.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/esp8266-esp01-wifi-module-india-800x800-1.jpg?v=1655366079"},{"product_id":"esp32-node-mcu-module","title":"ESP32 30 Pin CP2102 NodeMCU Development Board with Wi-Fi and Bluetooth","description":"\u003cp data-end=\"568\" data-start=\"519\"\u003e\u003cstrong data-end=\"568\" data-start=\"519\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli data-end=\"609\" data-start=\"572\"\u003eDual-core 32-bit LX6 microprocessor\u003c\/li\u003e\n\u003cli data-end=\"667\" data-start=\"612\"\u003eIntegrated 2.4GHz Wi-Fi and Bluetooth (Classic + BLE)\u003c\/li\u003e\n\u003cli data-end=\"709\" data-start=\"670\"\u003e30-pin layout for compact form factor\u003c\/li\u003e\n\u003cli data-end=\"743\" data-start=\"712\"\u003e520KB SRAM + 4MB Flash memory\u003c\/li\u003e\n\u003cli data-end=\"809\" data-start=\"746\"\u003eMultiple GPIOs with support for ADC, DAC, PWM, I2C, SPI, UART\u003c\/li\u003e\n\u003cli data-end=\"852\" data-start=\"812\"\u003ePCB antenna for wireless communication\u003c\/li\u003e\n\u003cli data-end=\"915\" data-start=\"855\"\u003eBuilt-in USB to Serial (CP2102\/CH340) for easy programming\u003c\/li\u003e\n\u003cli data-end=\"967\" data-start=\"918\"\u003eLow-power consumption with multiple sleep modes\u003c\/li\u003e\n\u003cli data-end=\"1028\" data-start=\"970\"\u003eIdeal for IoT, automation, robotics, and sensor networks\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-end=\"1076\" data-start=\"1030\"\u003e\u003cstrong data-end=\"1076\" data-start=\"1030\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1103\" data-start=\"1080\"\u003eChipset: ESP-32\u003c\/li\u003e\n\u003cli data-end=\"1162\" data-start=\"1106\"\u003eMicrocontroller: Dual-Core 32-bit LX6\u003c\/li\u003e\n\u003cli data-end=\"1192\" data-start=\"1165\"\u003eClock Speed: Up to 240MHz\u003c\/li\u003e\n\u003cli data-end=\"1214\" data-start=\"1195\"\u003eFlash Memory: 4MB\u003c\/li\u003e\n\u003cli data-end=\"1230\" data-start=\"1217\"\u003eSRAM: 520KB\u003c\/li\u003e\n\u003cli data-end=\"1259\" data-start=\"1233\"\u003eWi-Fi: IEEE 802.11 b\/g\/n\u003c\/li\u003e\n\u003cli data-end=\"1295\" data-start=\"1262\"\u003eBluetooth: v4.2 (Classic + BLE)\u003c\/li\u003e\n\u003cli data-end=\"1313\" data-start=\"1298\"\u003eGPIO Pins: 30\u003c\/li\u003e\n\u003cli data-end=\"1361\" data-start=\"1316\"\u003eUSB Interface: Micro USB (via CP2102)\u003c\/li\u003e\n\u003cli data-end=\"1411\" data-start=\"1364\"\u003eOperating Voltage: 3.3V (logic), USB 5V input\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1476\" data-start=\"1443\"\u003eMounting: Breadboard-compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eESP32 Development Board\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eis a powerful, feature-rich microcontroller module with integrated Wi-Fi and Bluetooth capabilities. Based on the ESP-32 SoC, it supports dual-core processing, making it ideal for IoT, automation, and wireless sensor applications. With 30 pins, it provides ample GPIOs and interface support for a wide range of projects.\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156191621163,"sku":"4574","price":399.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/esp32wroom.webp?v=1658573906"},{"product_id":"hc05-bluetooth-module","title":"HC-05 TTL Bluetooth Module 6 pin with Button","description":"\u003cul\u003e\n\u003cli\u003eBluetooth protocol: Bluetooth Specification v2.0+EDR.\u003c\/li\u003e\n\u003cli\u003eFrequency: 2.4GHz ISM band.\u003c\/li\u003e\n\u003cli\u003eModulation: GFSK(Gaussian Frequency Shift Keying).\u003c\/li\u003e\n\u003cli\u003eEmission power: =4dBm, Class 2.\u003c\/li\u003e\n\u003cli\u003eSensitivity: =-84dBm at 0.1% BER.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHC-05 6 Pin Wireless Serial Bluetooth Module is a Bluetooth module for use with any microcontroller.  It uses the UART protocol to make it easy to send and receive data wirelessly.\u003c\/p\u003e\n\u003cp\u003eThe HC-06 module is a slave only device.  This means that it can connect to most phones and computers with Bluetooth but it cannot connect to another slave-only device such as keyboards and other HC-06 modules.  To connect with other slave devices a master module would be necessary such as the HC-05 version which can do both master and slave.\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eEmbedded Projects.\u003c\/li\u003e\n\u003cli\u003eIndustrial Applications.\u003c\/li\u003e\n\u003cli\u003eComputer and Portable Devices.\u003c\/li\u003e\n\u003cli\u003eGPS receiver.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eWorking current: matching for 30 mA, matching the communication for 8 mA.\u003c\/li\u003e\n\u003cli\u003eDormancy current: no dormancy.\u003c\/li\u003e\n\u003cli\u003eUsed for a GPS navigation system, water, and electricity gas meter reading system.\u003c\/li\u003e\n\u003cli\u003eWith the computer and Bluetooth adapter, PDA, seamless connection equipment.\u003c\/li\u003e\n\u003cli\u003eBluetooth module HC-08 Master and slave Two in one module.\u003c\/li\u003e\n\u003cli\u003eUse the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.\u003c\/li\u003e\n\u003cli\u003ePotter default rate of 9600, the user can be set up.\u003c\/li\u003e\n\u003cli\u003eBluetooth protocol: Bluetooth Specification v2.0+EDR\u003c\/li\u003e\n\u003cli\u003eSpeed: Asynchronous: 2.1Mbps(Max) \/ 160 kbps, Synchronous: 1Mbps\/1Mbps.\u003c\/li\u003e\n\u003cli\u003eSecurity: Authentication and encryption.\u003c\/li\u003e\n\u003cli\u003eProfiles: Bluetooth serial port.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e1 x HC-05 6 pin Bluetooth Module with Button\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156191719467,"sku":"4370","price":272.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/hc05-4370-3.jpg?v=1765805206"},{"product_id":"bluetooth-xbee-zigbee-arduino-shield","title":"XBee Shield V03 Module Wireless Control Zigbee Shield for Arduino","description":"\u003col\u003e\n\u003cli\u003eStackable design, easy to plug into the ARDUINO development board.\u003c\/li\u003e\n\u003cli\u003eCoupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.\u003c\/li\u003e\n\u003cli\u003e3.3v and 5v dual power output.\u003c\/li\u003e\n\u003cli\u003e3.3v and 5v IO compatible.\u003c\/li\u003e\n\u003cli\u003eUSB2.0 protocol.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis Bluetooth XBee Shield V03 Module Wireless Control can achieve a simple two crunodal ZigBee network, achieve wireless communication between Arduino, and allows the Arduino to wireless communicate over a modified ZigBee protocol using the popular\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eXBee module.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIt is a fully Assembled shield without the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eXBee module. This unit works with all XBee modules including the Series 1 and Series 2 (and 2.5), standard and Pro version.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe XBee Shield simplifies the task of interfacing an XBee with your\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eArduino. This board mates directly with an Arduino Pro or USB board, and equips it with wireless communication capabilities using the popular XBee module.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplications :\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePC via a USB cable directly connected with XBee adapters.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBluetooth Bee configures or uses as a data-transmission.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eArduino board pro mini downloader.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis XBee module supports only Serial Communication.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStackable design, easy to plug into the ARDUINO development board.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCoupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCoupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.3v and 5v dual power output.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3.3v and 5v IO compatible.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUSB 2.0 protocol.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBitbang mode ready.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasily connected to a PC via mini USB Cable.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eXBee-setting support software X-CTU.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage Includes :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1 x Bluetooth XBee Shield V03 Module Wireless Control.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156191752235,"sku":"IHCM453","price":299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/Xbee-Zigbee-Shield-for-Arduino.jpg?v=1701858930"},{"product_id":"hm10-cc2541-bluetooth-ble-4-0-c","title":"HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module","description":"\u003col\u003e\n\u003cli\u003eBluetooth Protocol: Bluetooth Specification V4.0 BLE\u003c\/li\u003e\n\u003cli\u003eUSB Protocol: USB V2.0\u003c\/li\u003e\n\u003cli\u003eOperating Frequency: 2.4GHz ISM band\u003c\/li\u003e\n\u003cli\u003eModulation Mode: GFSK (Gaussian Frequency Shift Keying)\u003c\/li\u003e\n\u003cli\u003eTransmitting Power: ≤4dBm\u003c\/li\u003e\n\u003cli\u003eSensitivity: ≤-84dBm at 0.1% BER\u003c\/li\u003e\n\u003cli\u003eIt’s easy to use and completely encapsulated.\u003c\/li\u003e\n\u003cli\u003eYou can set it as slave or master.\u003c\/li\u003e\n\u003cli\u003eYou can use AT command set the baud rate.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eHM-10 BLE Bluetooth 4.0 CC2541 Wireless Module is a BLE module for an embedded system to get BLE wireless communication with BLE capable devices (e.g. Android, iPhone, and iPad).\u003c\/p\u003e\n\u003cp\u003eIt is fully configurable by a rich and well documented AT command-set and allows transparent data communication via serial UART (default baud rate 9600bps). The Bluetooth 4.0 HM-10 is basically a breakout board for cc2541, it broke out the LED pins, RX\/TX and also adding the voltage regulator that regular 5v to 3.3 v.\u003c\/p\u003e\n\u003cp\u003eHM-10 and HM-11 series Bluetooth module use TI CC2540 chip, configure 256KB space and support the AT command. Users can change the role (master, slave mode) and the serial port baud rate, equipment name, matching password and other parameters on-demand. It is very flexible to use.\u003c\/p\u003e\n\u003cp\u003eThe most complete, most convenient, and most stable Bluetooth data transmission, remote control and data acquisition module. Master-slave in one, transparent transmission, replacing the serial port. Remote control, transparent transmission, MCU is unnecessary. Remote data acquisition, transparent transmission, MCU is unnecessary.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003ePin Description of HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTATE:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003estate test pins, connected to an internal LED, generally keep it unconnected.\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eBRK:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ebreak connect, it means breaking the Bluetooth connection, generally keep it unconnected.\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eVCC:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003epositive pole of the power source.\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eGND:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eGround.\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eTXD:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eserial interface, transmitting terminal.\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eRXD:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eserial interface, receiving terminal.\u003c\/em\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156191785003,"sku":"IHCM473","price":299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM502.jpg?v=1655366069"},{"product_id":"sim300-gsm-gprs-on-board-anteena-modem","title":"SIM300 GSM \/ GPRS On Board Antena Modem","description":"\u003cul\u003e\n\u003cli\u003eSIM300 GSM module transmission.\u003c\/li\u003e\n\u003cli\u003eComes with an onboard wire antenna for better reception.\u003c\/li\u003e\n\u003cli\u003eCan be used for Data\/Fax, GSM based Voice communications, TCP\/IP stack, GPRS and SMS\u003c\/li\u003e\n\u003cli\u003eSIM300 allows an adjustable serial baud rate from 1200 to 115200 bps (9600 default).\u003c\/li\u003e\n\u003cli\u003eProvides RS232 interface for connection to computers and other devices.\u003c\/li\u003e\n\u003cli\u003eLithium Battery holder\u003c\/li\u003e\n\u003cli\u003eCan add external antenna with SMA connectors.\u003c\/li\u003e\n\u003cli\u003ePower, RING and Network LEDs for easy debugging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e--\u003cbr\u003e\n\u003cp\u003eGSM Modem SIM 300 \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis Tri-Band GSM-based SIM300 modem is designed from SIMCOM. This miniature GSM\/GPRS modem can be integrated into a great number of IoT projects. It operates on frequencies 900 MHz, 1800 MHz, and 1900 MHz. This small size and easy to use as a plug-in GSM Modem. Using the AT command the baud rate is configurable from 1200-115200bps. And it is for applications handling Data, SMS,  Voice \u0026amp; Fax. These products are widely used for GSM voice communications and TCP or IP stacks. This SIM300 is compatible with ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc. And can also be directly connected to a computer via Serial Port.\u003c\/p\u003e\n\u003cp\u003eThe SIM300 GSM\/GPRS Module with RS232 Interface is a complete tri-band GSM\/GPRS solution featuring an ultra-compact design that can be embedded in the customer applications. Moreover, this SIM300 modem built with SIM300 GSM chip and RS232 interface ensures easy connection with the computer or laptop. This achieved using the USB to the Serial connector or to the microcontroller using the RS232 to TTL converter. Meanwhile, it supports communication through RS232 with DB9 Connector, TTL Pins, and I2C Pins. The module operates at a voltage range of 7-15V AC.\u003c\/p\u003e\n\u003cp\u003eThe module consists of an onboard Regulated Power supply that allows you to connect a wide range of unregulated power supplies. So this modem can be used to make audio calls, SMS, Read SMS, attend the incoming calls and etc. through simple AT commands. Moreover, it is designed as a complete GSM module in an SMT type made with a very powerful single-chip. Moreover, it comes with a sim holder, external antennas and two onboard LEDs to indicate the power status.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156192014379,"sku":"IHCM103","price":999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/SIM300-image.gif?v=1680342232"},{"product_id":"gsm-indoor-anteena-sma-connector","title":"GSM Indoor Anteena - SMA connector","description":"\u003cp\u003eWeight: 8g; Material: Metal, Plastic; Frequency: 824-960MHZ \u003cbr\u003eGain: 2.5-3dbi; Type: Female \u003cbr\u003eImpedance: 50ohm; Power: 50W \u003cbr\u003eOverall Size: 48 x 17 x 8mm \/ 1.9\" x 0.67\" x 0.31\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSMA female elbow connector. \u003cbr\u003eMade of metal,plastic.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156192833579,"sku":"IHCM116","price":49.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM116.jpg?v=1655366070"},{"product_id":"sim800l-gsm-ttl-module","title":"SIM800L GSM GPRS Micro Sim Card Module","description":"\u003cul\u003e\n\u003cli\u003ePWM\/Buzzer vibration motor control\u003c\/li\u003e\n\u003cli\u003eAT command interface with \"auto baud\" detection\u003c\/li\u003e\n\u003cli\u003eSend and receive SMS messages.\u003c\/li\u003e\n\u003cli\u003eSend and receive GPRS data (TCP\/IP, HTTP, etc.).\u003c\/li\u003e\n\u003cli\u003eScan and receive FM radio broadcasts.\u003c\/li\u003e\n\u003cli\u003eLead out buzzer and vibration motor control port.\u003c\/li\u003e\n\u003cli\u003eAT command interface with \"auto baud\" detection.\u003c\/li\u003e\n\u003cli\u003eOnboard IPEX socket that can be connected to external antenna.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eSim800L Module is low cost, low form factor GSM module based on SIM800L chipset. Sim800L module supports quad-band GSM and GPRS network.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003eThis breakout board is perfect for application where size and cost is a constraint. Sim800l gsm module also supports quad band which means that it can work anywhere in the world. This low cost module is perfect for launching your next IoT project. Using this module you can almost make your own cellphone.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eUsing this module you can:-\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSend Text Messages (SMS)\u003c\/li\u003e\n\u003cli\u003eMake or receive Phone calls\u003c\/li\u003e\n\u003cli\u003eConnect to Internet via GPRS\u003c\/li\u003e\n\u003cli\u003eTCP\/IP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures of SIM800L GSM Module:-\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eQuad-band 850\/900\/1800\/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested).\u003c\/li\u003e\n\u003cli\u003eMake and receive voice calls using a headset or an external 8Ω speaker and electret microphone.\u003c\/li\u003e\n\u003cli\u003eBreakouts for external 8W speaker and electret mic if you don't want to use a headphone\u003c\/li\u003e\n\u003cli\u003eLevel shifting circuitry so you can run it with 2.8V to 5V logic.\u003c\/li\u003e\n\u003cli\u003eVibrational motor (buzzer) driver so you can have noiseless notifications\u003c\/li\u003e\n\u003cli\u003euFL or SMA connections for external antenna\u003c\/li\u003e\n\u003cli\u003eIndicator LEDs for power and network connectivity\u003c\/li\u003e\n\u003cli\u003eStandard SIM slides into the back\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156192997419,"sku":"3418","price":329.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM557.jpg?v=1655366072"},{"product_id":"nrf24l01-pa-lna-sma","title":"NRF24L01 PA + LNA SMA Wireless Transceiver Antenna 2.4Ghz","description":"\u003col\u003e\n\u003cli\u003eVoltage: 3-3.6V (recommended 3.3V) V.\u003c\/li\u003e\n\u003cli\u003eMaximum output power: +20dBm.\u003c\/li\u003e\n\u003cli\u003ePower-down mode current: 4.2uA.\u003c\/li\u003e\n\u003cli\u003eOperating Range: 1Km\u003c\/li\u003e\n\u003cli\u003eAntenna Gain (peak): 2Dbi.\u003c\/li\u003e\n\u003cli\u003e2MB rate (Open area): 520m.\u003c\/li\u003e\n\u003cli\u003e1MB rate (Open area): 750m.\u003c\/li\u003e\n\u003cli\u003e250Kb rate (Open area): 1100m.\u003c\/li\u003e\n\u003cli\u003eIt uses 2.4GHz global open ISM band, with license free.\u003c\/li\u003e\n\u003cli\u003eSPI interface facilitates the communication with MCU I\/O port.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eNordic Semiconductor\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the 2.4GHz NRF24L01+PA+LNA SMA Wireless\u003cspan\u003e \u003c\/span\u003eTransceiver\u003cspan\u003e \u003c\/span\u003eAntenna and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis board features a reverse polarized SMA connector for maximum\u003cspan\u003e \u003c\/span\u003eRF\u003cspan\u003e \u003c\/span\u003erange. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis module comes with the 2.4G\u003cspan\u003e \u003c\/span\u003eantenna\u003cspan\u003e \u003c\/span\u003e(2DB), with a 250Kbps transmission rate on open-air it can reach the 800-1K meters communication distance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis wireless\u003cspan\u003e \u003c\/span\u003eTransceiver module\u003cspan\u003e \u003c\/span\u003eis an easy and suitable module if you want to set up your wireless communication system at a low cost!! It can achieve a good balance between wireless transition performance and cost!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eYou can easily add it with your own MCU\/ARM\/PIC\/AVR\/STM32 system! What’s more, this nRF24L01+ module is designed with the Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier)\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e1 x 2.4GHz NRF24L01 Transceiver module.\u003c\/p\u003e\n\u003cp\u003e1 x SMA Antenna.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156193226795,"sku":"4319","price":215.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM542.jpg?v=1655366090"},{"product_id":"ask-315mhz-pair-1tx-1rx","title":"315Mhz RF Module Pair(TX+RX)","description":"\u003col\u003e\n\u003cli\u003eFrequency: 315Mhz\u003c\/li\u003e\n\u003cli\u003eTransmitor Input Voltage: 5V \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan id=\"tl_2\"\u003eReceiver module parameters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-spm-anchor-id=\"a2g0o.detail.1000023.i3.7465cle2cle20t\"\u003e\u003cspan\u003e\u003cspan id=\"tl_3\"\u003eProduct model: MX-RM-5V\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i1.7e2072d1nqVt4s\" id=\"tl_4\"\u003eWorking voltage: DC5V quiescent current: 4MA\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"tl_5\"\u003eReceiving frequency: 315MHZ\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"tl_6\"\u003eReceiver sensitivity: - 105DB\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"tl_7\"\u003eSize: 30*14*7mm external antenna: 32CM single core wire wound into a spiral\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan id=\"tl_8\"\u003eTransmitter head technical parameters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"tl_9\"\u003eProduct model: MX-FS\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"tl_10\"\u003eLaunch distance: 20 \u003c\/span\u003e\u003cspan id=\"tl_11\"\u003e-200 meters\u003c\/span\u003e\u003cspan id=\"tl_12\"\u003e (Different voltage, different results) Operating voltage: 3.5-12V Dimensions: 19*19mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"tl_13\"\u003eWays of working: AM transfer rate: 4KB\/S transmit power: 10mW\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"tl_14\"\u003eTransmitting frequency: 315M\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan id=\"tl_15\"\u003eAn external antenna: ordinary 25cm multi-core or single-core line\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-spm-anchor-id=\"a2g0o.detail.1000023.i2.7465cle2cle20t\"\u003e\u003cspan\u003e\u003cspan id=\"tl_16\"\u003ePinout from left → right: (DATA; VCC; GND)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan id=\"tl_17\"\u003eApplication environment\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"left\" data-spm-anchor-id=\"a2g0o.detail.1000023.i0.7e2072d1nqVt4s\"\u003e\u003cspan\u003e\u003cspan id=\"tl_18\"\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i4.7465cle2cle20t\"\u003eRemote control switch, receiver module, motorcycles, auto anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, retractable doors remote control, remote volume gate, pan doors, remote controlled door opener, door closer device control system, remote controlled curtains, alarm host, alarm, remote controlled motorcycle electric cars, MP3 remote control.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156194373675,"sku":"IHCM42","price":99.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/RF-315Mhz-module-for-arduino-raspberrypi-1000x750.jpg?v=1718969983"},{"product_id":"nrf24l01-breakout-board-pair","title":"NRF24L01 2.4GHz Antenna Wireless Transceiver Module","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eParticularly suitable for industrial control applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eBuilt-in 2.4Ghz antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eBuilt-in voltage regulator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eStandard DIP Pitch Interface for embedded applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAuto-acknowledge and auto-retransmit\u003c\/li\u003e\n\u003cli\u003eArduino and Raspberry Pi compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Addicore nRF24L01+ is a 2.4GHz ISM band transceiver. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes on board support components and a 2.4GHz antenna for easy implementation into designs without additional hardware. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCommunication range up to 262 feet (80 meters) in ideal conditions. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps). \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe on chip voltage regulator accepts supply voltages from 1.9 to 3.6V. When using the nRF24L01+ with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the nRF24L01+ module. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUltra low power consumption as low as 11.3mA transmitting, 13.5mA receiving at 2Mbps, 900nA in power down, and 26uA in standby. \u003cbr\u003eInternal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC). \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices. \u003cbr\u003eAuto-acknowledge and auto-retransmit \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eModule Dimensions: 29mm (1.142\") long x 15.2mm (0.595\") wide x 4.6mm (0.181\") tall (not including header pins)\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156194471979,"sku":"IHCM336","price":99.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM336.jpg?v=1655366090"},{"product_id":"125khz-rfid-tag-key","title":"RFID Tag 125kHz with Key Ring","description":"\u003ch3\u003e\u003cspan\u003eFeatures\/Specs:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e125khz RFID proximity id token tag key keyfobs for the access system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperation frequency: 125 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEach token pre-programmed with a unique id which is printed on it\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWater-resistant, each comes with keyring included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with all RFID reader to gain access\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCard read distance: 0- 10 cm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe 125khz rfid tag - key fob are considered passive tags; Each of these have a unique id, so multiple tags can be used in a single project and may be purchased in any quantity \u003cbr\u003eWorks with most common rfid card reader (serial and usb)\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156194930731,"sku":"IHCM161","price":19.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/RFID-TAG-KR-125-672x504.jpg?v=1735390856"},{"product_id":"rfid-sticker-125khz","title":"RFID Tag Sticker - 125KHz","description":"\u003cp\u003eEasy to carry,Waterproof\n\u003cbr\u003eThe card made of high temperature composite materials, have superiorfolding characteristics\n\u003cbr\u003eCard Life: More than 100,000 times\n\u003cbr\u003eData Retention Time: 10 years\n\u003cbr\u003eTypical Applications:For sauna, swimming pool, patrol, trees, animals, access control, public transportation, parking, authentication, time and attendance management, ticket, card payment, product ide\u003c\/p\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eDiameter is: 25mm.and not print the ID number on it. Specifications: l Easy to carry,Waterproof l The card made of high temperature composite materials, have superiorfolding characteristics l Operating Frequency:125KHz l Thickness: 1.0-1.3mm l Read Distance: 1.5-5cm l Card Life: More than 100,000 times l Data Retention Time: 10 years l Typical Applications:For sauna, swimming pool, patrol, trees, animals, access control, public transportation, parking, authentication, time and attendance management, ticket, card payment, product identification\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156194996267,"sku":"IHCM534","price":29.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM563.jpg?v=1655366093"},{"product_id":"s50-smart-card","title":"125KHZ RFID Card (Thick Card)","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e125kHz RFID Technology: Swift and secure access.\u003c\/li\u003e\n\u003cli\u003eDurable Build: Resilient construction for longevity.\u003c\/li\u003e\n\u003cli\u003eVersatile Use: Ideal for offices, hotels, and events.\u003c\/li\u003e\n\u003cli\u003eEffortless Integration: Compatible with existing RFID systems.\u003c\/li\u003e\n\u003cli\u003eCompact Design: Slim profile fits easily into wallets or cardholders.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156195094571,"sku":"IHCM228","price":49.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/rfid-125khz-thickcard1-1000x1000.webp?v=1744528075"},{"product_id":"13-56mhz-smart-read-write-card","title":"Smart Read \/ Write RFID PVC Card 13.56Mhz","description":"\u003cul\u003e\n\u003cli\u003eChip: UID \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: PVC \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 13.56MHz \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: High quality ABS \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperation frequency: 13.56MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. High quality RFID cards proximity door control access. \u003cbr\u003e2. Each card without a unique ID number \u003cbr\u003e3. Suitable for 13.56MHz card reader and reading distance is 0-10cm. \u003cbr\u003e4. Widely used at apartment, office, park and other places. \u003cbr\u003e5. 100% brand new and high quality. \u003cbr\u003e6. Read, Writable and Rewrite. Waterproof \u003cbr\u003e7. Can copy write mi fare 1k key card\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156195127339,"sku":"IHCM153","price":99.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/SmartCard.jpg?v=1656409600"},{"product_id":"usb-to-esp8266-serial-wireless-wifi-module-development-board","title":"USB to UART \/ ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip","description":"\u003col\u003e\n\u003cli\u003eDriver Chip: CH340G\u003c\/li\u003e\n\u003cli\u003eSupports all basic windows versions.\u003c\/li\u003e\n\u003cli\u003eThe adapter plate integrated 1000μF solid capacitors to ensure the current supply\u003c\/li\u003e\n\u003cli\u003eThe power supply will not be a problem to make WIFI module crashes unresponsive.\u003c\/li\u003e\n\u003cli\u003eUsing 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.\u003c\/li\u003e\n\u003cli\u003eWorking voltage: 4.5V – 5.5V (Onboard 3.3v LDO Regulator)\u003c\/li\u003e\n\u003cli\u003eWorking current: 300mA (LDO regulator can supply)\u003c\/li\u003e\n\u003cli\u003eUsing CH340 turns serial port chip for stable performance and compatibility.\u003c\/li\u003e\n\u003cli\u003eSupports all basic windows versions.\u003c\/li\u003e\n\u003cli\u003eThe adapter plate integrated 1000μF solid capacitors to ensure the current supply\u003c\/li\u003e\n\u003cli\u003eThe power supply will not be a problem to make WIFI module crashes unresponsive.\u003c\/li\u003e\n\u003cli\u003eUsing 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.\u003c\/li\u003e\n\u003cli\u003eThe interposer board is specifically designed for ESP8266 The USB Turn serial port.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThis USB to UART\/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip converts the signal from a USB interface to a PC \/ laptop to match a serial module ESP8266.\u003cbr\u003e\u003cbr\u003eThis converter module has CH340 chip which is reliable and with high performance. It is compatible with most Windows systems. The adapter features integrated capacitors to maintain a current of 1000 μF.\u003cbr\u003e\u003cbr\u003eUSB to ESP-01 adapter module has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do ESP-01 functional debugging. ESP-01 serial wifi module can be directly plugged into the yellow pin header without any connecting wire.\u003cbr\u003e\u003cbr\u003eUSB to UART\/ESP8266 Programmer used for an ESP-01 module with the ESP8266 chip. It has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do with ESP-01.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156278292523,"sku":"4438","price":129.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/43920.webp?v=1664181830"},{"product_id":"nodemcu-esp8266-wifi-0-96-inch-oled-board-wireless-iot-application","title":"NodeMCU ESP8266 WIFI + 0.96 INCH OLED BOARD WIRELESS\/IOT APPLICATION","description":"\u003cp\u003eCompatible with Arduino \u0026amp; NodeMCU\n\u003cbr\u003eMicro USB connection\u003c\/p\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eNodemcu ESP8266 Wifi 0.96 Inch OLED Board development board integrates the ESP8266 0.96 Inch OLED having a resolution of 128x64. OLED is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode a next generation of flat-panel displays.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156282388523,"sku":"","price":950.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/510TVMIL-FL.jpg?v=1655367323"},{"product_id":"esp32-cam-wifi-module-bluetooth","title":"ESP32S CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization","description":"\u003col\u003e\n\u003cli\u003eFlash LED off: 180mA @ 5V.\u003c\/li\u003e\n\u003cli\u003eFlash LED on to maximum brightness: 310mA @ 5V.\u003c\/li\u003e\n\u003cli\u003eDeep-sleep: 6mA @ 5V min.\u003c\/li\u003e\n\u003cli\u003eModem-sleep: 20mA @ 5V min.\u003c\/li\u003e\n\u003cli\u003eLight-sleep: 6.7mA @ 5V min.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization has a very competitive small-size camera module that can operate independently as a minimum system with a footprint of only 40 x 27 mm; a deep sleep current of up to 6mA and is widely used in various IoT applications.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for home smart devices, industrial wireless control, wireless monitoring, and other IoT applications.\u003c\/p\u003e\n\u003cp\u003eThis module adopts a DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which is convenient for application in various IoT hardware terminals.\u003c\/p\u003e\n\u003cp\u003eESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture. It has the main frequency adjustment range of 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eNote\u003c\/span\u003e\u003c\/strong\u003e: The product dimension may have ±2% error. The product color may have some variation due to the light effect.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eESP32-CAM :\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe smallest 802.11b\/g\/n Wi-Fi BT SoC module.\u003c\/li\u003e\n\u003cli\u003eLow power 32-bit CPU, can also serve the application processor.\u003c\/li\u003e\n\u003cli\u003eUp to 160MHz clock speed, summary computing power up to 600 DMIPS.\u003c\/li\u003e\n\u003cli\u003eBuilt-in 520 KB SRAM, external 4MPSRAM.\u003c\/li\u003e\n\u003cli\u003eSupports UART\/SPI\/I2C\/PWM\/ADC\/DAC.\u003c\/li\u003e\n\u003cli\u003eSupport OV2640 and OV7670 cameras, built-in flash lamp.\u003c\/li\u003e\n\u003cli\u003eSupport image WiFI upload.\u003c\/li\u003e\n\u003cli\u003eSupports TF card.\u003c\/li\u003e\n\u003cli\u003eSupports multiple sleep modes.\u003c\/li\u003e\n\u003cli\u003eEmbedded Lwip and FreeRTOS.\u003c\/li\u003e\n\u003cli\u003eSupports STA\/AP\/STA+AP operation mode.\u003c\/li\u003e\n\u003cli\u003eSupport Smart Config\/AirKiss technology.\u003c\/li\u003e\n\u003cli\u003eSupport for serial port local and remote firmware upgrades (FOTA).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications :\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWireless Module: ESP32-S WiFi 802.11 b\/g\/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM.\u003c\/li\u003e\n\u003cli\u003eExternal Storage: micro SD card slot up to 4GB.\u003c\/li\u003e\n\u003cli\u003eCamera\n\u003cul\u003e\n\u003cli\u003eFPC connector.\u003c\/li\u003e\n\u003cli\u003eSupport for OV2640 (sold with a board) or OV7670 cameras.\u003c\/li\u003e\n\u003cli\u003eImage Format: JPEG( OV2640 support only ), BMP, grayscale.\u003c\/li\u003e\n\u003cli\u003eLED flashlight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpansion: 16x through-holes with UART, SPI, I2C, PWM.\u003c\/li\u003e\n\u003cli\u003eMisc: Reset button.\u003c\/li\u003e\n\u003cli\u003ePower Supply: 5V via pin header.\u003c\/li\u003e\n\u003cli\u003ePower Consumption.\n\u003col\u003e\n\u003cli\u003eFlash LED off: 180mA @ 5V.\u003c\/li\u003e\n\u003cli\u003eFlash LED on to maximum brightness: 310mA @ 5V.\u003c\/li\u003e\n\u003cli\u003eDeep-sleep: 6mA @ 5V min.\u003c\/li\u003e\n\u003cli\u003eModem-sleep: 20mA @ 5V min.\u003c\/li\u003e\n\u003cli\u003eLight-sleep: 6.7mA @ 5V min.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions (ESP32): 40 x 27 x 12 (LxWxH) mm.\u003c\/li\u003e\n\u003cli\u003eTemperature Range: Operating: -20 ℃ ~ 85 ℃; storage: -40 ℃ ~ 90 ℃ @ \u0026lt; 90%RH.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e1 x ESP32 CAM WiFi Module.\u003c\/p\u003e\n\u003cp\u003e1 x OV2640 Camera Module 2MP.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156282486827,"sku":"","price":699.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/ESP32-CAM.jpg?v=1762255224"},{"product_id":"wemos-lolin32-v1-0-0-based-on-esp32-rev1-wifi-bluetooth-board","title":"WeMos LOLIN 32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board","description":"\u003cul\u003e\n\u003cli\u003eMicrocontroller: ESP-32\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins: 26\u003c\/li\u003e\n\u003cli\u003eAnalog Input Pins: 12\u003c\/li\u003e\n\u003cli\u003eClock Speed(Max): 240MHz\u003c\/li\u003e\n\u003cli\u003eFlash: 4MB\u003c\/li\u003e\n\u003cli\u003eWIFI\u003c\/li\u003e\n\u003cli\u003ebluetooth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e--\u003cbr\u003e\n\u003cp\u003eThis is WeMos LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board. The board design is basically perfect. It takes more than a little inspiration from Adafruit’s Feather series.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156282552363,"sku":"","price":999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/6l.png?v=1655367355"},{"product_id":"hc-06-4pin-bluetooth-module-slave-no-button","title":"HC 06 4pin Bluetooth Module (Slave) No Button","description":"\u003col\u003e\n\u003cli\u003eBases at CSR BC04 Bluetooth technology.\u003c\/li\u003e\n\u003cli\u003ewith build-in 2.4GHz PCB antenna\u003c\/li\u003e\n\u003cli\u003eIt’s at the Bluetooth class 2 power level.\u003c\/li\u003e\n\u003cli\u003eRange test: 10 meters\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 3.3V to 6V DC\u003c\/li\u003e\n\u003cli\u003eOperating current in pairing is in the range of 30~40mA.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eHC-06 is the popular Bluetooth module. This HC06 module is slave mode only. It’s very easy to add wireless serial connectivity for your device with this module. Examples for Arduino and other boards are available. Once you pair with other Bluetooth devices you work like with normal UART to exchange data.\u003c\/p\u003e\n\u003cp\u003eThis module has built-in 3.3V voltage regulator and helps to break out the important pins (Vcc, Gnd, Txd, Rxd). Based on CSR BC4 chip, Bluetooth V2.0 + EDR. You can set the baud rate, name and pair password by AT commands when there is no Bluetooth connection. This module is a slave- it can be paired with Computer- Bluetooth master- mobile phone- PDA- PSP and so on.\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eBases at CSR BC04 Bluetooth technology.\u003c\/li\u003e\n\u003cli\u003ewith build-in 2.4GHz PCB antenna\u003c\/li\u003e\n\u003cli\u003eIt’s at the Bluetooth class 2 power level.\u003c\/li\u003e\n\u003cli\u003eRange test: 10 meters\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 3.3V to 6V DC\u003c\/li\u003e\n\u003cli\u003eOperating current in pairing is in the range of 30~40mA.\u003c\/li\u003e\n\u003cli\u003eOperating current in communication is 8mA.\u003c\/li\u003e\n\u003cli\u003eInterface via UART, default baud rate at 9600 bps\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -25 °C – +75°C\u003c\/li\u003e\n\u003cli\u003eDimensions 27mm×13mm×2.2mm\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156283502635,"sku":"4373","price":299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/6qq.png?v=1655367336"},{"product_id":"hc-06-6pin-bluetooth-module-without-button","title":"HC-06 6 Pin Bluetooth Module Without Button","description":"\u003cp\u003eUsed for a GPS navigation system, water, and electricity gas meter reading system.\n\u003cbr\u003eWith the computer and Bluetooth adapter, PDA, seamless connection equipment.\u003c\/p\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThe module has a full-duplex serial port to use later, when paired, without knowing any Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most common communication format, not support other formats.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156283535403,"sku":"","price":899.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/6d.png?v=1655367323"},{"product_id":"neo-6m-gps-module","title":"Ublox NEO 6M GPS Module","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e5Hz position update rate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eOperating temperature range: -40 TO 85°CUART TTL socket\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eEEPROM to save configuration settings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThe cold start time of 38 s and Hot start time of 1 s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSupply voltage: 3.3 V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eConfigurable from 4800 Baud to 115200 Baud rates. (default 9600)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSuperSense ® Indoor GPS: -162 dBm tracking sensitivity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSupport SBAS (WAAS, EGNOS, MSAS, GAGAN)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSeparated 18X18mm GPS antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNEO-6M GPS Module is not compatible with APM 2.8 Flight Controller.\u003c\/li\u003e\n\u003cli\u003eProduct Images are shown for illustrative purposes only and may differ from actual product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x NEO-6M GPS Board.\u003c\/li\u003e\n\u003cli\u003e1 x Detachable Antenna.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156286025771,"sku":"3451","price":299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/neo-6M.jpg?v=1655367356"},{"product_id":"ublox-neo-7m-gps-module-2","title":"Ublox NEO 7M GPS Module","description":"\u003cul\u003e\n\u003cli\u003ePosition can be updated every 12 seconds . Cold start time of 38 s and Hot Start Time of 1 s\u003c\/li\u003e\n\u003cli\u003eBaud Rate: 4800 to 115200 (Default: 9600)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS: -162 dBm tracking sensitivity\u003c\/li\u003e\n\u003cli\u003eSupports SBAS (WAAS, EGNOS, MSAS, GAGAN)\u003c\/li\u003e\n\u003cli\u003eComes with GPS Antenna (18 x 18 mm)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eStandalone GPS receiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAnti-Jamming technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eUART Interface at the output pins (Can use SPI ,12C and USB by soldering pins to the chip core)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eUnder 1 second time-to-first-fix for hot and alded starts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Receiver type: 50 Channels – GPS L1 frequency SBAS (WAAS, EGNOS, MSAS, GAGAN)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eTime-To-First-fix: For Cold Start 32s, For Warm Start 23s, For Hot Start \u0026lt;1s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMaximum navigation update rate: 5Hz Default baud rate: 9600bps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eEEPROM with battery backup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSensitivity: -160dBm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSupply voltage: 3.6V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMaximum DC current at any output: 10mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eOperation limits: Gravity-4g. Altitude-50000m. Velocity-500m\/s Operating temperature range: -40 °C TO 85°C\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe NEO-7 series provides maximum sensitivity while maintaining low system power. The NEO-7M is optimized for cost sensitive applications, while NEO-7N provides best performance and easier RF integration. The industry proven NEO form factor allows easy migration from previous NEO generations . Sophisticated RF-architecture and interference suppression ensure maximum performance even in GPS-hostile environments\u003c\/span\u003e\u003cbr\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156286222379,"sku":"3454","price":549.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Neo-7M.jpg?v=1655367399"},{"product_id":"ublox-neo-8m-gps-module","title":"NEO M8N GPS Module with Ceramic Active Antenna","description":"\u003cul\u003e\n\u003cli\u003eThe ceramic antenna provides a very strong signal\u003c\/li\u003e\n\u003cli\u003eWith LED indicator lamp\u003c\/li\u003e\n\u003cli\u003eThe default baud rate: 9600.\u003c\/li\u003e\n\u003cli\u003eWith data backup battery.\u003c\/li\u003e\n\u003cli\u003eLED signal indicator.\u003c\/li\u003e\n\u003cli\u003eCompatible with various flight controller module.\u003c\/li\u003e\n\u003cli\u003eEEPROM save the configuration parameter data when power-down.\u003c\/li\u003e\n\u003cli\u003eAssistance AssistNow GNSS Online\u003c\/li\u003e\n\u003cli\u003eAssistNow GNSS Offline (up to 35 days)\u003c\/li\u003e\n\u003cli\u003eAssistNow Autonomous (up to 6 days)\u003c\/li\u003e\n\u003cli\u003eOMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eOscillator TCXO\u003c\/li\u003e\n\u003cli\u003eBuilt-in RTC crystal\u003c\/li\u003e\n\u003cli\u003eAnti-jamming Active CW detection and removal.\u003c\/li\u003e\n\u003cli\u003eExtra onboard SAW bandpass filter\u003c\/li\u003e\n\u003cli\u003eMemory Flash\u003c\/li\u003e\n\u003cli\u003eSupported antennas Active and passive\u003c\/li\u003e\n\u003cli\u003eOdometer Travelled distance\u003c\/li\u003e\n\u003cli\u003eData-logger For position, velocity, and time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003eThe APM2.5 NEO-M8N GPS Module GYGPSV1-8M is optimized for cost-sensitive applications, while NEO-M8N\/M8Q provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The futureproof NEO-M8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8 series of concurrent GNSS modules are built on the high performing M8 GNSS engine in the industry proven NEO form factor.NEO-M8N provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The future-proof NEOM8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications. \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003cbr\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156286287915,"sku":"3455","price":949.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Screenshot-146.png?v=1655367360"},{"product_id":"rf-encoder-decoder-module-board","title":"RF Encoder Decoder Module Board","description":"\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e \t\u003cli\u003eEasy interfacing with the RF modules, using the female headers for placing the modules.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eBreakout pins for connecting to the microcontroller.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eDIP Switch for Address Selection (when multiple modules are used at one location)\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eStatus LED for valid transmit.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eSupports both ASK, FSK RF modules\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eSmall size, high quality PCB.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThe module is a pair of Encoder \u0026amp; Decoder Boards. The entire module is quite easy to use and is compatible with most of the old and new versions of Arduino\/Raspberry Pi, PIC boards or projects.\u003c\/p\u003e\n\n\u003cp\u003eFeatures RF Encoder Decoder Module Board:-\u003c\/p\u003e\n\n\u003cp\u003e \n\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e \t\u003cli\u003eEasy interfacing with the RF modules, using the female headers for placing the modules.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eBreakout pins for connecting to the microcontroller.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eDIP Switch for Address Selection (when multiple modules are used at one location)\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eStatus LED for valid transmit.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eSupports both ASK, FSK RF modules\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eSmall size, high quality PCB.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156289204267,"sku":"","price":499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/RF-Encoder-Decoder-Module.jpg?v=1655367379"},{"product_id":"higrow-esp32-wifi-bluetooth-battery-dht11-soil-temperature-and-humidity-sensor-module","title":"Higrow ESP32 WiFi + Bluetooth Battery + DHT11 Soil Temperature and Humidity Sensor Module","description":"\u003cp\u003eBattery 18650 LG ESP32 3000mAh can power for 17 hours or more.\n\u003cbr\u003eThis capacitive sensor of soil moisture is different from most of the resistive sensors on the market, which uses the principle of capacitive sensing to detect the moisture of the soil.\n\u003cbr\u003eYou can avoid the problem of easy corrosion resistance sensors to greatly prolong the service life. Dimensions: 193.5 * 29.4 mm\n\u003cbr\u003ePackage includes: 1 x Wemos Higrow ESP32 WiFi + Bluetooth + Battery DHT11 Temperature and Humidity Sensor Module Soil\u003c\/p\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThis capacitive sensor of soil moisture is different from most of the resistive sensors on the market, which uses the principle of capacitive sensing to detect the moisture of the soil. You can avoid the problem of easy corrosion resistance sensors to greatly prolong the service life.\n\u003cbr\u003eDimensions: 193.5 * 29.4 mm\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156290285611,"sku":"IHCS15","price":1699.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/ESP32-Agri.jpg?v=1655367392"},{"product_id":"ttgo-t-call-v1-3-esp32-sim800l-wireless-communication-module","title":"TTGO T-Call ESPRESSIF ESP32 SIM800L Wireless Communication Module Lilygo","description":"\u003col\u003e\n\u003cli\u003eChipset :ESPRESSIF-ESP32 240MHz Xtensa® single-\/dual-core 32-bit LX6 microprocessor\u003c\/li\u003e\n\u003cli\u003eFLASH: QSPI flash 4MB \/ PSRAM 8MB\u003c\/li\u003e\n\u003cli\u003eSRAM:520 kB SRAM\u003c\/li\u003e\n\u003cli\u003eButton: Reset\u003c\/li\u003e\n\u003cli\u003eUSB to TTL: CP2104\u003c\/li\u003e\n\u003cli\u003eModular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO\u003c\/li\u003e\n\u003cli\u003eOn-board clock:40MHz crystal oscillator\u003c\/li\u003e\n\u003cli\u003eWorking voltage:2.7V-3.6V\u003c\/li\u003e\n\u003cli\u003eWorking current: About 70mA\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis is a LILYGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module Unsoldered. The module is used for wireless communication. The ESP V1.4 ESP32 Serial WIFI Wireless Transceiver Module is a self-contained SOC with an integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network.\u003c\/p\u003e\n\u003cp\u003eThis module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote : Board Design \u0026amp; writing may varies\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003col class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe SIM800L wireless communication module is integrated with an ESP32 chip with a dual-core 32-bit LX6 microprocessor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe SIM800L ESP32 wireless module needs a power supply of 5V\/1A and has a Type C port.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe ESP32 SIM800H wireless communication module features 802.11 b\/g\/n wifi protocol and Bluetooth v4.2BR\/EDR and BLE standard protocol.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThis wireless communication module supports cloud server development and SDK for user firmware development.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePackage Includes:\u003c\/h4\u003e\n\u003cp\u003e1 x LILYGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module \u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156296314923,"sku":"","price":2199.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/a32.jpg?v=1655367556"},{"product_id":"esp8266-esp-12f-module-serial-wifi-witty-cloud-development-board-mini-nodemcu","title":"ESP-12F ESP8266 Module Serial WIFI Witty Cloud Development Board + MINI nodeMCU","description":"\u003cul\u003e\n\u003cli\u003eLDR Light Sensor on board \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWS2812 Led on board \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3x tactile buttons (1x in the Witty board and 2x in theCH340 board) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMicro USB connection for power and\/or programming \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUses latest ESP-12F module with 4M flash and integrated antenna \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes CH340G USB-to-UART programmer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis ESP8266\/ ESP-12F Module\/ Serial WI-FI Witty Cloud Development Board + MINI nodeMCU is a cloud intelligent hardware development kit, the history of the simplest and most cost-effective IoT development board, don’t need you to understand the knowledge of the network, the TCP\/IP another complex, as long as you will C language, can use EMC’s with cloud SDK quickly realize the secondary development, the DEMO board can use mobile phone flow control panel mount RGB colourful lights, mobile terminal APP, can display environment brightness by photosensitive resistance, less code as long as the modification for half an hour can make your own remote control equipment, the system generates free APP (Android, IOS), open the SDK.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156296347691,"sku":"4540","price":249.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/esp8266-witty-development-board-mini-nodemcu-uses-esp-12f-module-original-imaf892x45bvsjby.jpg?v=1655367528"},{"product_id":"wemos-d1-r2-wifi-esp8266-development-board","title":"WEMOS D1 R2 WIFI ESP8266 DEVELOPMENT BOARD","description":"\u003cul\u003e\n\u003cli\u003eOn-Board Switching Power Supply \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: 9V to 12V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput: 5V at 1A Max \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.3V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe D1 R2 is a WiFi capable ESP8266EX based development board in the form of the common Arduino UNO board compatible format. This board is compatible with the Arduino IDE and with NodeMCU. The D1 R2 also features an on-board switching power supply which allows you to power the board from a power supply up to 12V.\u003c\/p\u003e\n\u003cp\u003eWeMos- D1 R2 WiFi ESP8266 Development Board is programmable via Arduino IDE. This is an ESP8266 based WiFi enabled microprocessor unit on a Arduino-UNO footprint. That means the board looks and works (in most cases) like an UNO. Several shields, sensors and output devices that are manufactured for the Arduino platform will work on the WeMos-D1R2 with the added advantage of builtin WiFi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures of Wemos D1 R2 Wifi -Esp8266 Development Board:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe D1 R2 is a mini wifi board based on ESP-8266EX \u003cbr\u003e11 digital input\/output pins, all pins have interrupt\/pwm\/I2C\/one-wire supported(except D0) \u003cbr\u003e1 analog input(3.3V max input) \u003cbr\u003eA Micro USB connection \u003cbr\u003eA power jack, 9-24V power input \u003cbr\u003eCompatible withArduino \u003cbr\u003eCompatible with nodemcu\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrocontroller: ESP8266EX \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.3V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins: 11 (all I\/O pins have interrupt\/pwm\/I2C\/one-wire capability, except for D0) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog Input Pins: 1 (3.2V max input) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlash Memory: 4MB \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOn-Board Switching Power Supply \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: 9V to 12V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput: 5V at 1A Max \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions: 68.6mm x 53.4mm (2.701\" x 2.102\") \/ Long x Wide \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Note: The D1 R2 is a 3.3V device. If you connect it to 5V digital sensors or devices you will need a logic level converter.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156296740907,"sku":"","price":399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/ARD3271.jpg?v=1655367564"},{"product_id":"sim900a-module-antenna-tested-gsm-gprs-board-5v","title":"SIM900A Module GSM GPRS Board 5V with Antenna","description":"\u003cp\u003e\u003cstrong\u003eOnboard Resources:\u003c\/strong\u003e \u003cbr\u003e– Serial port circuit(with protection) \u003cbr\u003e– Antenna interface circuit(SMA bend female port) \u003cbr\u003e– SIM card circuit (flip SIM slot) \u003cbr\u003e– 4×3.5mm fixture hole 4pcs \u003cbr\u003e– SIM900A serial port output terminal \u003cbr\u003e– Size:49mm x 47mm \u003cbr\u003e– Net Weight:28g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e \u003cbr\u003e1 x SIM900A GSM\/GPRS Module \u003cbr\u003e1 x Power Cable \u003cbr\u003e1 x Antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSIM900A  GSM\/GPRS Module + Antenna Wireless Module:\u003c\/strong\u003e \u003cbr\u003e– The onboard two set power supply interface VCC5 5V power supply, VCC4 interface, 3.5–4.5V power supply, optional power on self-starting (default) and control start \u003cbr\u003e– The onboard SMA (default) and antenna interface, SIM900A interface reserved reset \u003cbr\u003e– The size of the module is 49*50, all the new and original device \u003cbr\u003e– Support 2, mobile phone 3,4G card\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e \u003cbr\u003e– The serial port circuit: support for 3.3V single chip microcomputer. TTL serial port support 3.3 and 5V single chip microcomputer. \u003cbr\u003e– The SIM card circuit to increase the SMF05C ESD chip. \u003cbr\u003e– Antenna circuit: guarantee short and straight, so as to ensure the signal strength. \u003cbr\u003e– PCB display screen printing mark: each interface, convenient development two times, the SIM900\/A hardware is completely follow the design when the design manual. \u003cbr\u003e– Two power supply interface: VCC5, 5V DC above 1A. Computer 5V power supply can be early computer USB. DC long data circuit over larger recommended 5V1A. VCC4, 3.5–4.5V power supply, ibid., suitable for lithium battery. \u003cbr\u003e– Control pin all leads. \u003cbr\u003e– A TTL level, compatible with 3.3V and 5V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe control interface of each pin description:\u003c\/strong\u003e \u003cbr\u003e– GND – GND \u003cbr\u003e– SIMR SIM900A RXD, TTL level, can not be directly connected to the 232 level \u003cbr\u003e– SIMT SIM900A TXD, TTL level, can not be directly connected to the 232 level \u003cbr\u003e– RST – SIM900A reset, active low\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156298772523,"sku":"3415","price":569.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/BE03951_1024x1024_06de9f2f-57c2-48a4-b46a-7ef9e193f20c.jpg?v=1655367619"},{"product_id":"5v-relay-module-for-esp8266-esp-01s-wifi-module-without-esp8266","title":"WiFi Relay Module for ESP8266 ESP-01S (Without ESP8266)","description":"\u003cul\u003e\n\u003cli\u003eWorking voltage: DC 5V-12V\u003c\/li\u003e\n\u003cli\u003eWorking current: ≥250mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCommunication: ESP01 or ESP 01S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWiFi module Transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn many of the applications where you want to connect and control your tasks in automation and control, to your smartphone so that you can control the task whenever you want with just a click on your device. You can use separate microcontrollers and relay to do so or you can use this 5V Relay Module with ESP8266 to connect your single channel applications like garage door opener, coffee machine vender, toaster, TV switch etc. It is a simple and reliable way to get your automation task executed successfully. It has space for onboard ESP8266 WiFi Module which can connect with this relay module for easier control and smooth connection with app on your phone. Onboard ESP8266 WIFI module has three operating modes: STA (client), AP (hotspot), STA + AP (client + hotspot), according to the work of the module to select the corresponding WIFI module mode of operation. It has a short response time and very easy to program.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorking voltage: DC 5V-12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWorking current: ≥250mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCommunication: ESP01 or ESP 01S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWiFi module Transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLoad: 10A\/ 250VAC, 10A\/ 30VDC, 10A\/ 30VDC, 10A\/ 28VDC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eReverse Current Diode protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156300509227,"sku":"","price":299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/5VRelayModuleforESP8266ESP-01SWiFiModule_WithoutESP8266_1024x1024_21350279-2246-459d-9c30-3a913ac40e15.jpg?v=1655367594"},{"product_id":"appc220-bluetooth-voice-recognition-module","title":"Multifunction Shield For Arduino Uno \/ Leonardo","description":"\u003cdiv id=\"featurebullets_feature_div\" class=\"celwidget\" data-feature-name=\"featurebullets\" data-csa-c-id=\"mn0khn-lzi4qp-owjomq-1dj55n\" data-cel-widget=\"featurebullets_feature_div\"\u003e\n\u003cdiv id=\"feature-bullets\" class=\"a-section a-spacing-medium a-spacing-top-small\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul style=\"font-size: 0.875rem;\"\u003e\n\u003cul\u003e\n\u003cli\u003e4 digit 7-segment LED display module driven by two serial 74HC595’s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 0.875rem;\"\u003e\n\u003cul\u003e\n\u003cli\u003e4 x surface mount LED’s in a parallel configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 0.875rem;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10K adjustable precision potentiometer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 0.875rem;\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 x Independent push buttons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 0.875rem;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePiezo buzzer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 0.875rem;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDS18B20 temperature sensor interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 0.875rem;\"\u003e\n\u003cul\u003e\n\u003cli\u003eLM35 temperature sensor interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul style=\"font-size: 0.875rem;\"\u003e\n\u003cul\u003e\n\u003cli\u003eInfrared receiver interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv id=\"productDescription\" class=\"a-section a-spacing-small\"\u003e\n\u003cp\u003eThis Multifunction Shield For Arduino Uno \/ Leonardo is all in one shield for beginner users of the Arduino Development Board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Arduino Uno and Leonardo compatible multifunction experimenter shield (HCARDU0085) has a large range of features which makes it ideal for beginners who just want to experiment and learn, or just as a general-purpose shield for more advanced uses.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBesides the feature-rich range of components fitted to the shield, there is also a range of expansion headers for convenient interfacing of external modules and components. The shield includes R3 type headers for easy connection to your Arduino board. If you have a pre R3 design Arduino, please check for compatibility before purchase. \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e4 digit 7-segment LED display module driven by two serial 74HC595’s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e4 x surface mount LED’s in a parallel configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e10K adjustable precision potentiometer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e3 x Independent push buttons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePiezo buzzer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eDS18B20 temperature sensor interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eLM35 temperature sensor interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eInfrared receiver interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSerial interface header for convenient connection to serial modules such as Bluetooth, a wireless interface, voice module, a voice recognition module, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156301164587,"sku":"","price":159.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/65636114_2410052645721513_7376444234519281664_n.jpg?v=1655367702"},{"product_id":"d1-mini-v2-nodemcu-4-bytes-lua-wifi-development-board-esp8266","title":"D1 Mini V2 NodeMCU 4 bytes Lua WIFI Development Board ESP8266","description":"\u003cul\u003e\n\u003cli\u003eD1 Mini NodeMcu ESP8266 it is a mini WiFi board based on ESP8266EX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eArduino compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e5V 1A switching power supply (24V Max. Input) on board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eType: D1 WiFi Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e11 input\/output pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e1 ADC pin(Input: 0V – 3.3V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e64Kb of instruction RAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e96Kb of data RAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e4MBs of flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSupport OTA on line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266, it is a mini WIFI board based on ESP8266EX. 11 digital input\/output pins, all pins have interrupt\/PWM\/I2C\/one-wire supported(except \u003cstrong\u003eD0\u003c\/strong\u003e) 1 analog input(3.3V max input) and a Micro USB connection\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eD1 Mini NodeMcu ESP8266 it is a mini WiFi board based on ESP8266EX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eArduino compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e5V 1A switching power supply (24V Max. Input) on board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eType: D1 WiFi Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e11 input\/output pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e1 ADC pin(Input: 0V – 3.3V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e64Kb of instruction RAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e96Kb of data RAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e4MBs of flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSupport OTA on line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eQuantity: 1 Pc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures: WiFi Module, Stable Performance, Excellent Compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156301754411,"sku":"4571","price":329.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/ESP8266-D1-Mini-for-NodeMcu-Lus-WiFi-Wireless-458x458-1.jpg?v=1655367699"},{"product_id":"unowifi-r3-atmega328pnodemsu-esp8266-8mb-memory-usb-ttl-ch340g-compatible-for-arduino-uno","title":"Uno + WiFi R3 AtMega328p + NodeMCU ESP8266 8mb Memory USB-TTL CH340G","description":"\u003col\u003e\n\u003cli\u003eUSB-TTL converter.\u003c\/li\u003e\n\u003cli\u003eLogic Level: 5V.\u003c\/li\u003e\n\u003cli\u003eOperating Supply Voltage: 5V.\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins: 14.\u003c\/li\u003e\n\u003cli\u003eAnalog I\/O Pins: 6.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eUno+WiFi R3 AtMega328p+NodeMSU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO is full integration on one board: Uno R3 ATmega 328 and WiFi ESP8266 with memory 8Mb (MegaByte). All of the modules can work together or separately. And everyone has their own pinout headers.\u003c\/p\u003e\n\u003cp\u003eThe convenient solution for the development of new projects requiring Uno and Wi-Fi. Via USB you can update sketches and firmware for ATmega328  and for ESP8266 . For this onboard have the USB-serial converter CH340G.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156317679659,"sku":"0007","price":539.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/99_7a71e4b5-e001-4c51-8350-7b613c48d349.png?v=1655367910"},{"product_id":"lora-e5-development-kit","title":"LoRa-E5 Development Kit","description":"\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e \t\u003cli\u003eVoltage supply: 3-5V (Battery) \/ 5V(USB Type C)\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eVoltage output: EN 3V3 \/ 5V\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003ePower output Up to +20.8dBm at 3.3V\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eFrequency: 865\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eProtocol: LoRaWAN\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eSensitivity: -116.5dBm ~ -136dBm\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cbr\u003e1 x LoRa-E5 Dev Board\n\u003cbr\u003e1 x Antenna(EU868\/US915)\n\u003cbr\u003e1 x USB TypeC (20cm)\n\u003cbr\u003e1 x 2*AA 3V Battery Holder\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eLoRa-E5 Dev Board embedded with LoRa-E5 STM32WLE5JC Module that supports LoRaWAN protocol on the global frequency band. It leads out full GPIOs of LoRa-E5 supporting various data protocols and interfaces including RS-485, Grove, male\/female headers, etc. It would be a perfect choice for fast testing and rapid prototyping of your LoRa IoT projects.\u003c\/p\u003e\n\n\u003cp\u003eLoRa-E5 Dev Board embedded with LoRa-E5 STM32WLE5JC Module, which is the world-first combo of LoRa RF and MCU chip into one single tiny chip and is FCC and CE certified. It is powered by ARM Cortex-M4 core and Semtech SX126X LoRa chip, supports both LoRaWAN and LoRa protocol on the worldwide frequency and (G)FSK, BPSK, (G)MSK, and LoRa modulations.\u003c\/p\u003e\n\n\u003cp\u003eLoRa-E5 Dev Board has a long-distance transmission range of LoRa-E5 up to 10km in an open area. The sleep current of LoRa-E5 modules on board is as low as 2.1 uA(WOR mode). It is designed with industrial standards with a wide working temperature at -40 ℃ ~ 85℃, high sensitivity between -116.5 dBm ~ -136 dBm, and power output up to +20.8dBm at 3.3V.\n\u003cbr\u003e\u003c\/p\u003e\u003ch5 id=\"application\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \t\u003cli\u003eLoRa-E5 module Easy testing\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eRapid prototyping of LoRa devices with LoRa-E5\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eAny long-distance wireless communication application development\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eLoRa and LoRaWAN application learn and research\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003ch4 id=\"features\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cbr\u003e\u003col\u003e\n\u003cbr\u003e \t\u003cli\u003eUltra-low power consumption and high performance\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eEasy testing and rapid prototyping\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eFull GPIOs led out to rich interfaces, including RS-485, Grove, and etc.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eGlobal LoRaWAN and LoRa frequency plan supported\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eLong-distance transmission range to 10km (ideal value in open area)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cbr\u003eVoltage supply: 3-5V (Battery) \/ 5V(USB Type C)\n\u003cbr\u003eVoltage output: EN 3V3 \/ 5V\n\u003cbr\u003ePower output Up to +20.8dBm at 3.3V\n\u003cbr\u003eFrequency: 865\n\u003cbr\u003eProtocol: LoRaWAN\n\u003cbr\u003eSensitivity: -116.5dBm ~ -136dBm\n\u003cbr\u003eInterfaces: USB Type C \/ JST2.0 \/ Grove*3(IIC*2\/UART*1) \/ RS485 \/ SMA-K \/ IPEX\n\u003cbr\u003eModulation: LoRa, (G)FSK, (G)MSK, BPSK\n\u003cbr\u003eWorking temperature: -40℃ ~ 85℃\n\u003cbr\u003eCurrent: LoRa-E5 module sleep current as low as 2.1uA (WOR mode)\n\u003cbr\u003eDimension: 85.6*54mm","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156318105643,"sku":"","price":3599.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/LoRa-E5-Development-Kit-6.jpg?v=1655367954"},{"product_id":"elecfreaks-smart-science-iot-kit-microbit-climate-sensors-kit-for-iot-learning-ef-bc-88without-microbit-board-ef-bc-89","title":"Smart Science IoT Kit : micro bit climate sensors kit for IoT learning without micro:bit board","description":"\u003cp\u003eELECFREAKS Smart Science IoT Kit is developed based on loT:Bit, a new breakout board compatible with science sensors such as the ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module.\u003c\/p\u003e\n\n\u003cp\u003eSupport Thingspeak\/ IFTTT Oline Education to Learn Infinite. You can gather data via the sensors and send data to the cloud with more stable and accuratedata analysis.\u003c\/p\u003e\n\n\u003cp\u003e(1) Intergrated ESP12F WiFi, RTC, earphone jack and passive buzzer (2)Adaptive for Building Blocks (4 standard spacing fixed holes) (3)Separately lead IIC interface, directly plug in OLED, BME280 and IIC,etc\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156318335019,"sku":"","price":7999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/1-5.png?v=1655367974"},{"product_id":"sma-connector","title":"SMA Female Connector Through-Hole Edge PCB Mount","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSMA Connector, Female, Straight, PCB Connector, Plate Edge Mount, Copper, Gold Plating;\u003c\/li\u003e\n\u003cli\u003eExcellent electrical performance up to 18GHz with low reflection;\u003c\/li\u003e\n\u003cli\u003eThread type coupling mechanism ensure small loss and high security in compact design;\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Characteristics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImpedance 50 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency Range: 0~6 GHz\u003c\/li\u003e\n\u003cli\u003eVSWR: Straight type 1.3max \/ R\/A type 1.5max\u003c\/li\u003e\n\u003cli\u003eDielectric Withstanding Voltage: 1000 V rmsmin for RG142, RG405\u003c\/li\u003e\n\u003cli\u003e750 V rms min. for RG316, RG402\u003c\/li\u003e\n\u003cli\u003e500v rms min. for RG178\u003c\/li\u003e\n\u003cli\u003eWorking Voltage:500 V rms max. for RG142, RG405\u003c\/li\u003e\n\u003cli\u003e375 V rms max. for RG316, RG402\u003c\/li\u003e\n\u003cli\u003e170 V rms max. for RG178\u003c\/li\u003e\n\u003cli\u003eCenter Contact Resistance 6.0 m (Milliohms max.)\u003c\/li\u003e\n\u003cli\u003eOuter Contact Resistance 2.0 m (Milliohms max.)\u003c\/li\u003e\n\u003cli\u003eInsulation Resistance 5 x 10 m (Megohms min.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Characteristics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoupling: 1\/4-36 thread\u003c\/li\u003e\n\u003cli\u003eContact Retention: 15 in-lbs min.\u003c\/li\u003e\n\u003cli\u003eCoupling nut torque: 30 in-lbs. min.\u003c\/li\u003e\n\u003cli\u003eDurability(mating) 500 cycles (For Beryllium Copper Contact)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Characteristics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature Range: -55C ~ +155C\u003c\/li\u003e\n\u003cli\u003eVibration: MIL-STD-202 Meth.204\u003c\/li\u003e\n\u003cli\u003eCorrosion resistance: MIL-STD-202 Meth. 101\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156318531627,"sku":"","price":21.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/1-9.png?v=1655368046"},{"product_id":"4-channel-wireless-four-button-rf-remote-control-transmitter-module-mode-non-locking","title":"4 Channel Wireless Four Button RF Remote Control Transmitter Module (Mode: Non Locking)","description":"\u003cp\u003e\u003c\/p\u003e\u003col\u003e\n\u003cbr\u003e \t\u003cli\u003eNo. of the channel: 4\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eOperating mode: Non-Locking\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eTransmitter Operating voltage: DC 12V\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eTransmitting frequency: 315 MHZ.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eTransmitter Operating current: 10mA at 12V.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eTransmitterRadiated power: 10mW at 12V.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eTransmission distance (m): 3 to 5\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ol\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThe 4 Channel Wireless Four Button RF Remote Control Transmitter Receiver Module with Non-Locking mode can be composed of a fixed code four radio receiver circuits, remote control of four four-bit data output code corresponding to the module, you can easily make up a wireless remote control receiver circuit.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156318924843,"sku":"","price":399.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/11-3.png?v=1655367994"},{"product_id":"nrf24l01-socket-adapter-board-8pin-wireless-transceiver-module","title":"Socket Adapter Board 8 Pin Wireless Transceiver module NRF24L01 Wifi Base Board","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIt can be used with NRF24L01 wireless module\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdd core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOnboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAllows for easy connection to nRF24L01+ modules\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmall power on SMD LED indicator\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis 3.3V VCC Adapter Board for\u003cspan\u003e \u003c\/span\u003eNRF24L01 Wireless Transceiver Module\u003cspan\u003e \u003c\/span\u003eenables you to use NRF24l01 type transceivers on 5V systems like Arduino.\u003c\/p\u003e\n\u003cp\u003eIt regulates the 3.3V input to 1.9~3.6V DC and incorporates bypass capacitors for reliable operation. The NRF24L01 utilizes Enhanced ShockBurst (ESB) protocol to support two-way data packet communication with packet buffering, packet acknowledgement and automatic re-transmission of lost packets.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40177898749995,"sku":"","price":49.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/61fYQFB6MNL._SL1000.jpg?v=1656234680"},{"product_id":"lora-hat-sx1268","title":"Waveshare SX1262 LoRa HAT for Raspberry Pi 915MHz Frequency Band","description":"\u003col\u003e\n\u003cli\u003eSX1262 LoRa module\u003c\/li\u003e\n\u003cli\u003e74HC125V: voltage level translator\u003c\/li\u003e\n\u003cli\u003eCP2102: USB TO UART converter\u003c\/li\u003e\n\u003cli\u003eWorking bands: 850.125 ~ 930.125MHz\u003c\/li\u003e\n\u003cli\u003eReceive Sensitivity:\u003cspan\u003e \u003c\/span\u003e147dBm@0.3Kbps\u003cspan\u003e \u003c\/span\u003e(On-air)\u003c\/li\u003e\n\u003cli\u003eInterface: UART\u003c\/li\u003e\n\u003cli\u003eRange: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s on Board:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/robu.in\/wp-content\/uploads\/2021\/04\/Waveshare-SX1262-LoRa-HAT-for-Raspberry-Pi-868MHz-Frequency-Band-for-Europe-Asia-Africa.jpg\" data-mce-href=\"https:\/\/robu.in\/wp-content\/uploads\/2021\/04\/Waveshare-SX1262-LoRa-HAT-for-Raspberry-Pi-868MHz-Frequency-Band-for-Europe-Asia-Africa.jpg\"\u003e\u003cimg decoding=\"async\" class=\"wp-image-975450 size-full aligncenter\" src=\"https:\/\/robu.in\/wp-content\/uploads\/2021\/04\/Waveshare-SX1262-LoRa-HAT-for-Raspberry-Pi-868MHz-Frequency-Band-for-Europe-Asia-Africa.jpg\" alt=\"Waveshare SX1262 LoRa HAT for Raspberry Pi, 868MHz Frequency Band, for Europe, Asia, Africa\" width=\"780\" height=\"431\" srcset=\"https:\/\/robu.in\/wp-content\/uploads\/2021\/04\/Waveshare-SX1262-LoRa-HAT-for-Raspberry-Pi-868MHz-Frequency-Band-for-Europe-Asia-Africa.jpg 780w, https:\/\/robu.in\/wp-content\/uploads\/2021\/04\/Waveshare-SX1262-LoRa-HAT-for-Raspberry-Pi-868MHz-Frequency-Band-for-Europe-Asia-Africa-300x166.jpg 300w, https:\/\/robu.in\/wp-content\/uploads\/2021\/04\/Waveshare-SX1262-LoRa-HAT-for-Raspberry-Pi-868MHz-Frequency-Band-for-Europe-Asia-Africa-768x424.jpg 768w, https:\/\/robu.in\/wp-content\/uploads\/2021\/04\/Waveshare-SX1262-LoRa-HAT-for-Raspberry-Pi-868MHz-Frequency-Band-for-Europe-Asia-Africa-462x255.jpg 462w\" sizes=\"(max-width: 780px) 100vw, 780px\" data-mce-src=\"https:\/\/robu.in\/wp-content\/uploads\/2021\/04\/Waveshare-SX1262-LoRa-HAT-for-Raspberry-Pi-868MHz-Frequency-Band-for-Europe-Asia-Africa.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSX1262 LoRa module\u003c\/li\u003e\n\u003cli\u003e74HC125V: voltage level translator\u003c\/li\u003e\n\u003cli\u003eCP2102: USB TO UART converter\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi GPIO connector: for connecting with Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eUSB TO UART port\u003c\/li\u003e\n\u003cli\u003eUART header: for connecting host boards like STM32\/Arduino\u003c\/li\u003e\n\u003cli\u003eSMA antenna connector\u003c\/li\u003e\n\u003cli\u003eIPEX antenna connector\u003c\/li\u003e\n\u003cli\u003eIndicators:\n\u003cul\u003e\n\u003cli\u003eRXD\/TXD: UART RX\/TX indicator\u003c\/li\u003e\n\u003cli\u003eAUX: auxiliary indicator\u003c\/li\u003e\n\u003cli\u003ePWR: power indicator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUART selection jumpers\n\u003cul\u003e\n\u003cli\u003eA: control the LoRa module through USB TO UART\u003c\/li\u003e\n\u003cli\u003eB: control the LoRa module through Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eC: access Raspberry Pi through USB TO UART\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoRa mode selection jumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards\u003c\/li\u003e\n\u003cli\u003eOnboard CP2102 USB TO UART converter, for serial debugging\u003c\/li\u003e\n\u003cli\u003eBrings the UART control interface, for connecting host boards like Arduino\/STM32\u003c\/li\u003e\n\u003cli\u003e4x LED indicators, easy to check the module status\u003c\/li\u003e\n\u003cli\u003eLoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference\u003c\/li\u003e\n\u003cli\u003eAuto multi-level repeating, suit for ultra-long-range communication, allows multi-network on the same region\u003c\/li\u003e\n\u003cli\u003eLow power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications\u003c\/li\u003e\n\u003cli\u003eCustomizable communication key which won’t be retrieved greatly improves the security of user data\u003c\/li\u003e\n\u003cli\u003eLBT support, monitoring the signal channel noise before transmitting, greatly improves the success ratio under an extreme environment\u003c\/li\u003e\n\u003cli\u003eRSSI signal intensity indicating support, for evaluating signal quality, tuning the network\u003c\/li\u003e\n\u003cli\u003eWireless parameter configuration, by sending wireless command\/data packet, remotely configure or retrieve the module parameter\u003c\/li\u003e\n\u003cli\u003eSupports fixed-point transmission, broadcast, signal channel monitor\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x SX1262 915M LoRa HAT\u003c\/li\u003e\n\u003cli\u003e1 x USB type A plug to micro plug cable\u003c\/li\u003e\n\u003cli\u003e1 x 915MHz antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":40183107387435,"sku":"","price":2399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Waveshare-SX1268-LoRa-HAT-for-Raspberry-Pi-433MHz-Frequency-Band-for-Europe-Asia-Africa-3.jpg?v=1656416699"},{"product_id":"12v-10a-4-channel-rf-wireless-remote-control-switch-relay-module-rf-remote-controller-rf-transmitter-receiver","title":"4CH 12V 10A RF Wireless Remote Control Switch Relay Module | RF Transmitter + Receiver","description":"\u003cp\u003eOperating Voltage: DC12V \u003cbr\u003eTransmitting Frequency: 315MHz \u003cbr\u003eTransmission Distance: 80M (Open field) \u003cbr\u003eFiring Range: 100meter \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceiver\u003c\/strong\u003e: \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1. Working voltage: DC12V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. Quiescent condition: Less than 6mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. Working temperature: -40 Degree +80 Degree\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4. Receiver sensitivity: more than -105dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5. Working frequency: 433mhz\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e6. Output voltage: DC and AC is optional\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e7. Output current: Less than 3A\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e8. Max load current: 20A\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e9. Size: 7.2 x 5.2 x 2.6cm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included\u003c\/strong\u003e: 1 x Remote Control Transmitter 1 x Receiver Board\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40214258941995,"sku":"","price":749.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/433mhz-24v-4-channel-relay-module-wireless-with-rf-remote-control-switch-without-1000x1000.jpg?v=1703835584"},{"product_id":"copy-of-esp-12f-esp8266-wifi-wireless-module","title":"ESP-12E ESP8266 Serial Port WIFI Wireless Transceiver Module","description":"\u003cul\u003e\n\u003cli\u003eLDR Light Sensor on board.\u003c\/li\u003e\n\u003cli\u003eWS2812 Led on board.\u003c\/li\u003e\n\u003cli\u003eThe micro USB connection for power and\/or programming.\u003c\/li\u003e\n\u003cli\u003e802.11 b\/g\/n\u003c\/li\u003e\n\u003cli\u003eWi-Fi Direct (P2P), soft-AP\u003c\/li\u003e\n\u003cli\u003eIntegrated TCP\/IP protocol stack\u003c\/li\u003e\n\u003cli\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network\u003c\/li\u003e\n\u003cli\u003eIntegrated PLL, regulators, DCXO and power management units\u003c\/li\u003e\n\u003cli\u003e19.5dBm output power in 802.11b mode\u003c\/li\u003e\n\u003cli\u003ePower down leakage current of \u0026lt;10uA\u003c\/li\u003e\n\u003cli\u003eIntegrated low power 32-bit CPU could be used as an application processor\u003c\/li\u003e\n\u003cli\u003eSDIO 1.1 \/ 2.0, SPI, UART\u003c\/li\u003e\n\u003cli\u003eSTBC, 1×1 MIMO, 2×1 MIMO\u003c\/li\u003e\n\u003cli\u003eA-MPDU \u0026amp; A-MSDU aggregation \u0026amp; 0.4ms guard interval\u003c\/li\u003e\n\u003cli\u003eWake up and transmit packets in \u0026lt; 2ms\u003c\/li\u003e\n\u003cli\u003eStandby power consumption of \u0026lt; 1.0mW (DTIM3)\u003c\/li\u003e\n\u003cli\u003eAccess Point and Station Modes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40219469447211,"sku":"4450","price":135.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/ESP12E1.jpg?v=1766154005"},{"product_id":"1575-mhz-gps-antenna-for-gps-gsm-module-with-3-meter-cable-good-quality","title":"GPS Antenna for GPS module with 3 Meter Cable-Good Quality","description":"\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis GPS\/GLONASS GNSS Antenna is designed for applications that require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space-restricted environments. With 3-meter long cable, one can use this antenna to enhance the GPS Signals in an indoor project with GPS and GSM modules as well as Raspberry Pi HAT or Arduino Shield\u003cspan\u003e. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe antenna assembly consists of a patch antenna for receiving GNSS signals and a preamplifier for signal amplification.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower supply to the antenna preamplifier must be provided by the application on the same RF signal trace as the GNSS RF signal is carried to the application.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe antenna has an internal magnet so that it can be fixed on a metallic surface.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to use an antenna. Does not require RF or antenna knowledge.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40230622986283,"sku":"3628","price":349.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/GPS-antenna.webp?v=1740200576"},{"product_id":"2-channel-rf-transmitter-and-receiver-remote-control-relay-switch-car-key-type","title":"2 Ch 5v RF Transmitter and Receiver Remote Control Relay Switch Car Key Type","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWireless relay module using a remote control to switch a relay using a remote. It can be used as a two-channel wireless switch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eApplications: Garage Door, Household Electrical Appliances, RGB lights\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStable performance and strong to resist interference, not obstructed by walls and furniture!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eReference distance: 10 Meter (This is the theory distance in an open environment without interference, practical application due to the interference environment and decreased)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eCharacteristic: Double control(wall switch function and control function),safety(the shell applies to the fire-retardant material),easy installation(just wire connection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePackage Includes: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRF Receiver Module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRF Transmitter (Remote)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlastic Case for Receiver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40232652832811,"sku":"6131","price":549.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/HatchnHack_Makerspace_HNH_Cart_Components-14_800x_461d0d02-48ac-4a94-8471-e170092723f7.webp?v=1657959626"},{"product_id":"sma-wifi-antenna-aerial-2-4ghz-18dbi-w-rp-sma-male-connector-for-wireless-router-wifi-adapter-gsm-gps","title":"SMA WiFi Antenna Aerial 2.4GHz 18dBi w\/ RP-SMA Male Connector for Wireless Router WiFi Adapter GSM GPS","description":"\u003cdiv data-automation=\"long-description\" class=\"css-atfa7r e1mpbtcv5\" data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency : 2.4GHz\u003c\/li\u003e\n\u003cli\u003eVSWR: \u0026lt;= 1.5\u003c\/li\u003e\n\u003cli\u003eGain: 18dBi (MAX)\u003c\/li\u003e\n\u003cli\u003ePolarization Vertical\u003c\/li\u003e\n\u003cli\u003eMaxmum input power: 50W\u003c\/li\u003e\n\u003cli\u003eConnector Type: RP-SMA Male\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eAntenna Size: approx. 22.2 * 2.7 * 1.30cm \/ 8.74 * 1.06 * 0.51in\u003c\/li\u003e\n\u003cli\u003eAntenna Weight: approx. 36g \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage List:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 * pcs 18dBi Antenna\u003c\/div\u003e\n\u003cdiv data-automation=\"feature-specifications\" class=\"css-jpiy7w e1mpbtcv6\" data-mce-fragment=\"1\"\u003e\n\u003cbr\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e* -made protector makes it waterproof and prevents it from oxidization.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e* T Type antenna, foldable to 90 degrees, convenient for you to use.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e* Metal-plated connector has the best quality in solderability, conductivity and stability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e* 18 dBi gain makes the WiFi signal strong and stable.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e* Widely compatible with wireless communication devices, such as for Modem Pools, set-top boxes, WiFi routers, WiFi adapters and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40232803565611,"sku":"","price":199.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/smaantena.jpg?v=1657970629"},{"product_id":"ublox-neo-m8n-gps-with-compass","title":"NEO M8N GPS with Compass for Pixhawk","description":"\u003cul data-mce-fragment=\"1\" li=\"\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSBAS L1 C\/A: WAAS, EGNOS, MSAS\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGalileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOnboard Compass\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAssistance AssistNow GNSS Online\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAssistNow GNSS Offline (up to 35 days)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAssistNow Autonomous (up to 6 days)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOscillator TCXO (NEO-M8N\/Q),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCrystal (NEO-M8M)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRTC crystal Built-In\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNoise figure On-chip LNA (NEO-M8M). Extra LNA for\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003elowest noise figure (NEO-M8N\/Q)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnti-jamming Active CW detection and removal. Extra\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eonboard SAW bandpass filter (NEO-M8N\/Q)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMemory ROM (NEO-M8M\/Q) or Flash (NEO-M8N)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSupported antennas Active and passive\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOdometer Travelled distance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData-logger For position, velocity, and time (NEO-M8N)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a new generation NEO-M8N High Precision GPS Module with Built-in Compass for APM FC with onboard Compass, low power consumption, and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy, support GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 protocol, and mode or more\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnti-jamming Active CW detection and removal. Extra onboard SAW band passes filter (NEO-M8N\/Q). Data logger For position, velocity, and time (NEO-M8N). With a sticker, it is easy and quick to install.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eMade from qualified material with exquisite workmanship, it is reliable and safe to use.\u003c\/p\u003e\n\u003cp\u003eWith compass GPS module is convenient to use.\u003c\/p\u003e\n\u003cp\u003eWith fast satellite searching speed and high precision.\u003c\/p\u003e\n\u003cp\u003eSupported aerial active and passive.\u003c\/p\u003e\n\u003cp\u003eThese are Pre-configured, Flashed with the correct settings, and tested\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40236961497131,"sku":"","price":1799.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/61PfoCse7EL._SL1202.jpg?v=1768892968"},{"product_id":"ublox-neo-6m-gps-module-built-in-compass","title":"Ublox NEO 6M GPS Module Built-in Compass","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBuilt-in compass GPS module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMain chip: Ublox-6M\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBuilt-in high gain ceramic antenna and reverse polarity protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWith fast satellite searching speed and high precision.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible with APM serial port and I2C port.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40236972900395,"sku":"","price":1399.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/6m.webp?v=1658142134"},{"product_id":"dvb-t-dab-fm-tv-tuner-receiver-set-with-remote-controller-for-pc-usb2-0-black-12","title":"DVB - T DAB FM TV Tuner Receiver Set with Remote Controller for PC USB2.0  - Black\t12","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eInterface: USB 2.0 Standard\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eRecording format: DVBT TV-DVD(MPEG-2), FM radio \/ DAB radio-WMA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eVideo: AVI-MPEG4, ASF-MPEG4, MP4-MPEG4(for ipod), PSP-MPEG4, 3GP-MPEG4, AVI-DIVX, AVI-XVID, MOV-MPEG4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eAudio: MP3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eInput: 50 Ohm IEC(Din) Connector\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eoutput: A type usrb male connect\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eReceiving frequency: DVBT: 48.25 - 863.25 MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eFM radio: 87.5 - 108 MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eDAB radio: L-Band 1452960 - 1490624 KHz \/ VHF 74928 - 239200 KHZ\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eTV system: Full DVB-T and DAB compliant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eBandwidth: 6 \/ 7 \/ 8 MHz auto select for DVB-T\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40239197782059,"sku":"","price":1499.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/fm.jpg?v=1658218140"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/collections\/IOTM.png?v=1723870527","url":"https:\/\/www.indianhobbycenter.com\/collections\/iot.oembed?page=7","provider":"Indian Hobby Center","version":"1.0","type":"link"}