{"title":"Arduino, Shield \u0026amp; Accessories","description":"\u003cp\u003e \u003c\/p\u003e\n\u003c!----\u003e","products":[{"product_id":"original-arduino-uno-rev3","title":"Original Arduino Uno Rev3 R3 (A000066)","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eArduino UNO\u003c\/strong\u003e\u003cspan\u003e is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArduino Model: Arduino Uno R3 Original\u003c\/li\u003e\n\u003cli\u003eMicrocontroller: ATmega328\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 5V\u003c\/li\u003e\n\u003cli\u003eSupply Voltage (recommended): 7-12V\u003c\/li\u003e\n\u003cli\u003eMaximum supply voltage: 20V\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins: 14 (of which 6 provide PWM output)\u003c\/li\u003e\n\u003cli\u003eAnalog Input Pins: 6\u003c\/li\u003e\n\u003cli\u003eDC Current per I\/O Pin: 40mA\u003c\/li\u003e\n\u003cli\u003eDC Current for 3.3V Pin: 50mA\u003c\/li\u003e\n\u003cli\u003eFlash Memory: 32 KB of which 0.5 KB is used by the bootloader\u003c\/li\u003e\n\u003cli\u003eSRAM: 2KB\u003c\/li\u003e\n\u003cli\u003eEEPROM: 1KB\u003c\/li\u003e\n\u003cli\u003eClock Speed: 16MHz\u003c\/li\u003e\n\u003cli\u003eLED_BUILTIN: 13\u003c\/li\u003e\n\u003cli\u003eLength: 68.6 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 53.4 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 25 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"ino-product-section-subtitle\"\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Arduino Uno is an original microcontroller board from Arduino officials based on the ATmega328P.\u003c\/strong\u003e  It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.\u003c\/p\u003e\n\u003cp\u003e“Uno” means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Original Arduino Uno Rev3 board is the first in a series of USB Arduino boards and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePinout Diagram:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/content.arduino.cc\/assets\/A000066-pinout.png\"\u003e\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":40156187852843,"sku":"A000066","price":1999.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/A000066_03.front_643x483_61d580be-f518-4de9-af2d-8e4f1037d64d.jpg?v=1727803857"},{"product_id":"arduino-mega2560","title":"Arduino MEGA 2560 R3 ATmega2560","description":"\u003cul\u003e\n\u003cli\u003eMicrocontroller: ATmega2560\u003c\/li\u003e\n\u003cli\u003eEEPROM: 4KB\u003c\/li\u003e\n\u003cli\u003eFlash Memory: 256 KB\u003c\/li\u003e\n\u003cli\u003eSRAM (KB): 8\u003c\/li\u003e\n\u003cli\u003ePWM Output Pins: 15\u003c\/li\u003e\n\u003cli\u003eAnalog I\/O Pins:16\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins: 54 digital input \/ output terminals (14 of which have programmable PWM outputs)\u003c\/li\u003e\n\u003cli\u003eDC Current per I\/O Pin (mA): 50\u003c\/li\u003e\n\u003cli\u003eArchitecture: Advanced RISC Architecture\u003c\/li\u003e\n\u003cli\u003eClock Speed: 16 MHz\u003c\/li\u003e\n\u003cli\u003eInput Voltage(Recommended): 7-12V\u003c\/li\u003e\n\u003cli\u003eOperating Voltage (VDC): 5\u003c\/li\u003e\n\u003cli\u003eWeight (gm): 35\u003c\/li\u003e\n\u003cli\u003eColor: Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eInput voltage should be limited to 6 ~ 12V, but if the voltage supplied is less than 6V, I \/ O port may not be supplied to a voltage of 5V, and therefore readings may become unstable. If the voltage is greater than 12V, the regulator device may overheat causing damage to the control board. It is therefore recommended that you supply between 6.5 and 12V, utilizing typical power supplies of 7.5V or 9V.\u003c\/p\u003e\n\u003cp\u003eMega 2560 is fully compatible with the Arduino software and has complete hardware compatibility with the Mega 2560 Arduino Shield high-performance processor and enough memory to handle even complex solutions.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156202303531,"sku":"0030","price":1499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/mega-2560.jpg?v=1741784928"},{"product_id":"w5100-ethernet-arduino-uno-shield","title":"W5100 Ethernet Shield Network Expansion Board w\/ Micro SD Card Slot for Arduino","description":"\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eThis module is compatible with \u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003eArduino UNO \u0026amp; Arduino MEGA\u003c\/div\u003e\n\u003col\u003e\n\u003cli\u003eBased on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.\u003c\/li\u003e\n\u003cli\u003eStackable Design, can directly be supported by for Arduino official Ethernet Library.\u003c\/li\u003e\n\u003cli\u003eSupports up to four simultaneous socket connections\u003c\/li\u003e\n\u003cli\u003eCan be used to store files for serving over the network.\u003c\/li\u003e\n\u003cli\u003eCan be accessed using the Mini SD TF library.\u003c\/li\u003e\n\u003cli\u003eIEEE802.3af compliant\u003c\/li\u003e\n\u003cli\u003eLow output ripple and noise (100mVpp)\u003c\/li\u003e\n\u003cli\u003eOverload and short-circuit protection\u003c\/li\u003e\n\u003cli\u003eCompatible with the for Arduino Duemilanove (168 or 328), Uno as well as Mega (1280\/2560).\u003c\/li\u003e\n\u003cli\u003eThe current shield has a Power over Ethernet (PoE) module designed to extract power from a conventional twisted pair Category 5 Ethernet cable.\u003c\/li\u003e\n\u003cli\u003e1500V isolation (input to output)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe Arduino Ethernet Shield allows an Arduino board to connect to the internet.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cem\u003eIt is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe Ethernet W5100 Shield Network Expansion Board w\/ Micro SD Card Slot supports up to four simultaneous socket connections.\u003c\/p\u003e\n\u003cp\u003eUse the Ethernet\u003cspan\u003e \u003c\/span\u003elibrary to write sketches which connect to the internet using the\u003cspan\u003e \u003c\/span\u003eshield. The ethernet shield connects to an\u003cspan\u003e \u003c\/span\u003eArduino board\u003cspan\u003e \u003c\/span\u003eusing long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe most recent revision of the board exposes the 1.0 pinout on rev 3 of the\u003cspan\u003e \u003c\/span\u003eArduino UNO\u003cspan\u003e \u003c\/span\u003eboard. This Ethernet Shield connects the UNO R3 board to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an\u003cspan\u003e \u003c\/span\u003eRJ45 cable\u003cspan\u003e \u003c\/span\u003e(not included) and follow a few simple instructions to start controlling your world through the internet. allows you to connect your\u003cspan\u003e \u003c\/span\u003eArduino UNO 328\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eMEGA 2650 1280\u003cspan\u003e \u003c\/span\u003eto a network or the internet AND retrieve or store files on a Micro SD Card!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ethernet Shield has a standard\u003cspan\u003e \u003c\/span\u003eRJ-45\u003cspan\u003e \u003c\/span\u003econnection, with an integrated line transformer and Power over Ethernet enabled. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Uno and Mega (using the Ethernet library). The onboard microSD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4. The original revision of the shield contained a full-size SD card slot; this is not supported.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe\u003cspan\u003e \u003c\/span\u003eshield\u003cspan\u003e \u003c\/span\u003ealso includes a reset controller, to ensure that the W5100 Ethernet module is properly reset on power-up. Previous revisions of the shield were not compatible with the Mega and need to be manually reset after power-up.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156202369067,"sku":"156","price":669.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/12-12-2.jpg?v=1761224440"},{"product_id":"lcd-keypad-arduino-uno-shield","title":"LCD KeyPad Shield for Arduino UNO","description":"\u003cp\u003eAnalog 0 Buttons (select, up, right, down and left)\n\u003cbr\u003eDigital 4 DB4\n\u003cbr\u003eDigital 5 DB5\n\u003cbr\u003eDigital 6 DB6\n\u003cbr\u003eDigital 7 DB7\n\u003cbr\u003eDigital 8 RS (Data or Signal Display Selection)\n\u003cbr\u003eDigital 9 Enable\u003c\/p\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThis is a 16x2 LCD and Keypad shield for Arduino Uno, Diecimila, Duemilanove and Freeduino boards.\u003c\/p\u003e\n\n\u003cp\u003eBlue Backlight with white words\n\u003cbr\u003euses 4 Bit Arduino LCD Library\n\u003cbr\u003eLeft, Right, Up, Down and Select buttons\n\u003cbr\u003eScreen contrast adjustment\n\u003cbr\u003eArduino Reset button\n\u003cbr\u003eThe board uses different pins to the Arduino example sketches, so to make the display work, use the following sequence of pins when starting the library:\u003c\/p\u003e\n\n\u003cp\u003eLiquidCrystal lcd(8,9,4,5,6,7);\u003c\/p\u003e\n\n\u003cp\u003eThe buttons are connected to only one analog input pin through resistors to give a different voltage for each button, thus saving on input\/output pins\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156202434603,"sku":"IHCM37","price":599.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM37.jpg?v=1655366170"},{"product_id":"arduino-mega2560-protoboard-shield","title":"Prototype Shield V3.0 For Arduino Mega with breadboard","description":"\u003col\u003e\n\u003cli\u003eThe shield can support being fully assembled with Arduino MEGA\u003c\/li\u003e\n\u003cli\u003eSupport soldering components directly on this shield\u003c\/li\u003e\n\u003cli\u003eSupport sticking the mini breadboards on this shield\u003c\/li\u003e\n\u003cli\u003eReset button up top\u003c\/li\u003e\n\u003cli\u003eMainboard aureate quadrate\u003c\/li\u003e\n\u003cli\u003eWith SOP28 SMT components encapsulation\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Prototype Shield V3.0 For Arduino Mega with breadboard to build the circuit. You can solder the components on this shield and also you can set up a circuit through the mini breadboard.\u003c\/p\u003e\n\u003cp\u003ePrototype Shield V3.0 For Arduino Mega with breadboard adopts the prototype V3 gold PCB sink process, mainboard golden square pad spacing small, welding components more convenient; SOP28 SMT components encapsulation makes it Arduino electronic lovers handier, not be straight bound by inserted components.\u003c\/p\u003e\n\u003cp\u003eThe Prototyping Shield makes it easy for you to design custom circuits. You can solder components to create the prototyping area your project, or use it with a small breadboard to quickly test circuit ideas without solder. Got extra connections for all I \/ O pins, and it has space to mount through-hole and surface mount integrated circuits. a convenient way to make your custom circuit and a module.\u003c\/p\u003e\n\u003cp\u003eThe maximum length and width of the Proto Shield PCB are 2.7 and 2.1 inches respectively. three screw holes allow the shield to be attached to a surface or case. note that the distance between digital pins 7 and 8 is 160 mil (12:16 “), not an even multiple of the 100-mile distance from the other pins.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156202467371,"sku":"IHCM39","price":169.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/prototype-shield-v3-0-for-arduino-mega-with-breadboard-tech7444-5886.jpg?v=1728465268"},{"product_id":"pro-micro","title":"Pro Micro 5V 16MHz Mini USB ATmega32U4 Module for Arduino (Micro USB)","description":"\u003col\u003e\n\u003cli\u003eModel: Pro-Micro 5V\u003c\/li\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eOn-Board Micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv id=\"descriptionAndDetails\" class=\"a-section a-spacing-extra-large\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"feature\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"a-row feature\"\u003e\n\u003cdiv id=\"productDescription\" class=\"a-section a-spacing-small\"\u003e\n\u003cp\u003eThis is a Mini USB ATmega32U4 Pro Micro 5V 16MHz Board Module.\u003c\/p\u003e\n\u003cp\u003eATMega 32U4 running at 5V\/16MHz. On-Board Micro-USB connector for programming. 12 x Digital I\/Os (5 are PWM capable). Rx and Tx Hardware Serial Connections. It has 4 channels of 10-bit ADC. There is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eATMega 32U4 running at 5V\/16MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOn-Board micro-USB connector for programming\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eRx and Tx Hardware Serial Connections\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e1 x Pro Micro 5V 16MHz Mini USB ATmega32U4 Module\u003c\/p\u003e\n\u003cp\u003e2 x 1 * 12 Header pin(Straight)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156202827819,"sku":"IHCM187","price":499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/atmega32u4_pro_micro_development_board_5v_16mhz_micro_usb_module_3.jpg?v=1764750911"},{"product_id":"due","title":"Arduino Due Development Board","description":"\u003cul\u003e\n\u003cli\u003eMicrocontroller: AT91SAM3X8E \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.3V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Voltage (recommended): 7-12V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Voltage (limits): 6-16V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins: 54 (of which 12 provide PWM output) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog Input Pins: 12 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog Outputs Pins: 2 (DAC) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCPU clock at 84Mhz \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e96KBytes of SRAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. The Due Arduino AT91SAM3X8E ARM Cortex-M3 Board is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input \/ output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.\u003c\/p\u003e\n\u003cp\u003eThe board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156202893355,"sku":"IHCM190","price":3399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/1-40.jpg?v=1655366174"},{"product_id":"2-8-tft-touch-screen-display-for-uno-r3","title":"2.8 inch SPI Touch Screen Module TFT Interface 240*320","description":"\u003cul\u003e\n\u003cli\u003e2.8\" diagonal LCD TFT display \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e240x320 resolution \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eILI9341 controller with built in video RAM buffer \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any Arduino '328 or Mega \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5V compatible! Use with 3.3V or 5V logic \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWith white LED backlight. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuport Mini SD card extension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis 2.8\" TFT Touchscreen shield is designed especially for Arduino UNO\/Mega2560. The shield can directly plug into the UNO\/Mega2560 board. The TFT display uses SPI protocol for communication with the MCU. Library for Adafruit TFT touchscreen shield is compatible with it, which is easy to use. It has way more better and clear resolution than a B\/W 128x64 display or a 16x2 lcd display. This display also has a resistive touchscreen attached to it, so you can detect a touch anywhere on the screen and this can also help take input via touch on screen.\u003c\/p\u003e\n\u003cp\u003eMeanwhile, this module supports mini SD card to expand storage and can display files from the same.\u003c\/p\u003e\n\u003cp\u003eThe display can be used for various application with Arduino like displaying sensor data, plotting of graph using the data obtained, building a touch screen calculator with input being provided by touching screen and using Arduino for computation.\u003c\/p\u003e\n\u003cp\u003eThe display can also be used with RPi via the SPI pins to be used as a screen. This could help display the GUI of RPi or even can be used to view the RPi's camera output.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156203089963,"sku":"4171","price":949.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/Ihc-LCD.jpg?v=1740200045"},{"product_id":"uno-r3-acrylic-case","title":"Acrylic Case for Arduino UNO R3","description":"\u003cp\u003eMaterial: A grade acrylic sheet. \u003cbr\u003eFor Arduino UNO R3 Development Board only. \u003cbr\u003eWith screw copper pillar and installation instructions. \u003cbr\u003eTo protect your little computer against damages, dust and scratches Clear Top and Bottom. \u003cbr\u003eThis case provides easy access to all ports. \u003cbr\u003eIt requires no tools for easy assembly and disassembly. \u003cbr\u003eSimply Clicks Together Enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTransparent Acrylic Case Shell Enclosure Gloss Box For Arduino Uno R3 is of high-grade acrylic, which provides excellent protection. This is unique design provides an easy connection to other components. The dimension of the enclosure box is the same as the original Arduino Uno R3.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156203122731,"sku":"0008","price":65.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/Uno-R3-Case-Enclosure_1200x1200_3bb3833e-aebb-4160-b9d3-db243b21e422.jpg?v=1765612913"},{"product_id":"lilypad-arduino","title":"Arduino LilyPad","description":"\u003cp\u003eMicrocontroller ATmega168 or ATmega328V\u003c\/p\u003e\n\n\u003cp\u003eOperating Voltage 2.7-5.5 V\n\u003cbr\u003eInput Voltage 2.7-5.5 V\n\u003cbr\u003eDigital I\/O Pins 14\n\u003cbr\u003ePWM Channels 6\n\u003cbr\u003eAnalog Input Channels 6\n\u003cbr\u003eDC Current per I\/O Pin 40 mA\n\u003cbr\u003eFlash Memory 16 KB (of which 2 KB used by bootloader)\n\u003cbr\u003eSRAM 1 KB\n\u003cbr\u003eEEPROM 512 bytes\n\u003cbr\u003eClock Speed 8 MHz\u003c\/p\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThe LilyPad Arduino Main Board is based on the ATmega168V (the low-power version of the ATmega168) or the ATmega328V\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156203155499,"sku":"IHCM600","price":649.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM629.jpg?v=1655366185"},{"product_id":"3-2-tft-touch-screen-display-for-mega","title":"3.2\" inch SPI Touch Screen Module TFT Interface 240*320 with Touch","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e320 x 240 Resolution \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with Raspberry Pi 2 \/ 3 \/ 4 all variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRGB 65K true to life colours \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTFT Screen with integrated 4-wire Resistive Touch Panel \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-spm-anchor-id=\"2114.12010108.1000023.i1.24b4d219Shv0kd\"\u003eEasy 4 pin interface to any TTL Serial Host \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4M Flash memory for User Application Code and Data \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOn board micro-SD card for firmware upgrade \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVisual Area:36.72mm(L)×48.96mm(W) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable Brightness:0~180 nit, the interval of adjustment is 1% \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5V90mA power conusmption\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156203614251,"sku":"IHCM607","price":1350.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/61qtcJ41BUL._AC_UF1000_1000_QL80_DpWeblab__1.jpg?v=1715685187"},{"product_id":"nano-cl","title":"Arduino Nano Board R3 with CH340 (Soldered,Compatible)","description":"\u003cul\u003e\n\u003cli\u003eOperating Voltage (logic level): 5V\u003c\/li\u003e\n\u003cli\u003eWith Soldered Connector\u003c\/li\u003e\n\u003cli\u003e8 analog inputs ports: A0 ~ A7\u003c\/li\u003e\n\u003cli\u003e14 Digital input \/ output ports: TX, RX, D2 ~ D13\u003c\/li\u003e\n\u003cli\u003e1 pair of TTL level serial transceiver ports RX \/ TX\u003c\/li\u003e\n\u003cli\u003eUsing Atmel Atmega328\u003c\/li\u003e\n\u003cli\u003eThere is a bootloader installed in it\u003c\/li\u003e\n\u003cli\u003eStandard 0.1” spacing DIP (breadboard friendly).\u003c\/li\u003e\n\u003cli\u003eManual reset switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe CH340 Soldered Nano Board R3 Chip without USB Cable chipboard is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint.\u003c\/p\u003e\n\u003cp\u003eNano CH340 Soldered Board R3 Chip without USB cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.\u003c\/p\u003e\n\u003cp\u003eThe Nano can be powered via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.\u003c\/p\u003e\n\u003cp\u003eThe size of Nano V3.0 with CH340 chip is only 43 mm x 18 mm; it comes with 6 PWM I\/O from the total of 14 digitals I\/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.\u003c\/p\u003e\n\u003cp\u003eNote:- CH340 chip might not work directly with some PC\/Laptop, you will need some ch340 drivers. \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 pair of TTL level serial transceiver ports RX \/ TX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUsing Atmel Atmega328\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThere is a bootloader installed in it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSupport USB download and Power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSupport for external 5V ~ 12V DC power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSupport power supply by 9V battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSupport ISP download\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic reset during program download.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e1 x Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156203647019,"sku":"0020","price":225.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/1-90.jpg?v=1655366179"},{"product_id":"joystick-arduino-uno-shield","title":"Joystick Shield Module","description":"\u003cp\u003eEasy to interface.\n\u003cbr\u003eEasy to handle.\n\u003cbr\u003eSturdy built quality.\n\u003cbr\u003eArduino Compatible.\u003c\/p\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThis Joystick Shield Module Robotics Control is an Uno compatible shield that allows you to turn an Arduino Uno or compatible into a game console or robotic controller. 3.3V to 5V Gamepad Joystick Shield Module Game Rocker Button Controller Expansion Board For Arduino Simulated Keyboard Mouse Module.\n\u003cbr\u003eThe shield sits on top of your Arduino and turns it into a simple controller. 7 momentary push buttons ( 4 big buttons + 2 small buttons + joystick select button ) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controller.\n\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eButtons:\u003c\/h2\u003e\n\u003cbr\u003eThere are a total of 6 buttons on the board (not including the one on the joystick) labeled A-F.   The 4 large buttons are typically used for up\/down\/left\/right or similar functions.  The two smaller buttons are typically used for less commonly used functions such as ‘select’ or ‘start’ since they are less accessible \/ less likely to be pressed accidentally.  All buttons have pull-up resistors and pull to ground when pressed.\n\n\u003cp\u003eButton A – Connects to D2\n\u003cbr\u003eButton B – Connects to D3\n\u003cbr\u003eButton C – Connects to D4\n\u003cbr\u003eButton D – Connects to D5\n\u003cbr\u003eButton E – Connects to D6\n\u003cbr\u003eButton F – Connects to D7\n\u003cbr\u003eBluetooth Connector:\n\u003cbr\u003eThe RX\/TX lines are brought out to a separate 4-pin female header along with 3.3V and Ground.  This can be used for connecting a 4-pin 3.3V Bluetooth device or a TTL serial device.\n\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eI2C Connector:\u003c\/h2\u003e\n\u003cbr\u003eThe I2C SDA and SCL lines are brought out to a separate 4-pin male header along with 5V and Ground.  This is in addition to the normal A4\/A5 location of these lines. This allows for easy attachment of I2C devices.\n\u003cbr\u003e\u003ch2\u003enRF24L01 Connector:\u003c\/h2\u003e\n\u003cbr\u003eThis connector allows a nRF24L01 RF transceiver module to be plugged in.\n\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e \t\u003cli\u003e2 x 4 Female Header\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eGND  –  Ground.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eVCC  –   3.3V\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eCE  –      Connects to D9\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eCSN   –  Connects to D10\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eSCK –     Connects to D13\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eMOSI –  Connects to D11\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eMISO –  Connects to D12\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eIRQ –     No Connection\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003ch2\u003eNokia 5110 LCD Connector:\u003c\/h2\u003e\n\u003cbr\u003eThis female header connector is designed to mount the Nokia 5110 LCD that was originally designed for Nokia phones and provides a 48×84 pixel matrix.\n\n\u003cp\u003eThis interface occupies the same D9-D13 pins as the nRF24L01, so you can’t use both at the same time.\n\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInterface Connector:\u003c\/h2\u003e\n\u003cbr\u003eThis dual row yellow male header connector provides another point of access to all the buttons, joystick pots, 3.3V, 5V and Ground.  The pin-out of this connector is labeled on the board to the left of the connector.\n\n\u003cp\u003eHere is an off-site link to a schematic of the assembly that you might find helpful.\n\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures :\u003c\/h2\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cbr\u003e \t\u003cli\u003eNRF24L01 RF interface\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003efor Nokia 5110 LCD interface\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003ebluetooth interface I2C interface\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003efor one PS2 joystick\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003e2-Axis joystick\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eBluetooth \/ Serial interface\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eI2C interface\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003enRF24L01 interface\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eNokia 5110 LCD interface\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eInterface connector\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003ePower switch to switch between 3.3 and 5V\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156203810859,"sku":"IHCM350","price":450.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Joystick-shield-Module-800x800-1.jpg?v=1655366183"},{"product_id":"sensor-shield-v2-for-mega2560","title":"Sensor Shield V2 for Mega 2560","description":"\u003cul\u003e\n\u003cli\u003eSensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMega Sensor Shield V2.0 pinout all of the Arduino digital and analog interface \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport IIC interface \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport 32 road Servo Motor Drive Shield interface \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport bluetooth module communication interface \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport SD card module communication interface \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport APC220 wireless rf modules communication interface \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport RB URF ultrasonic sensors interface \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport LCD serial and parallel interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSensor Shield V2 for Mega2560\u003c\/p\u003e\n\u003cp\u003eThis shield board plugs on top of an Arduino MEGA (1280 or 2560) and makes it easy to connect to all the MANY Digital Inputs and Outputs and the Analog Inputs. This is particularly good for high I\/O projects with many LEDs or controls where connections to the Mega can be a major problem.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156203843627,"sku":"IHCM435","price":199.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM464.jpg?v=1655366188"},{"product_id":"cnc-arduino-uno-shield","title":"DRV8825 CNC Shield V3","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x End stops for each axis (6 in total)\u003c\/li\u003e\n\u003cli\u003eSpindle enable and direction\u003c\/li\u003e\n\u003cli\u003eCoolant enable\u003c\/li\u003e\n\u003cli\u003eCompact design\u003c\/li\u003e\n\u003cli\u003eVery easy to use\u003c\/li\u003e\n\u003cli\u003eLatest Arduino CNC shield version V3.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an Arduino compatible V3 A4988\/DRV8825 Driver CNC shield. It can be used as a driver expansion board for engraving machines, 3D printers, and other devices. There are 4 slots in the board for stepper motor drive modules, which can drive 4 motors, and each stepper motor only needs two IO ports. In other words, 6 IO ports are quite capable of managing three stepper motors.\u003c\/p\u003e\n\u003cp\u003eThe module is very convenient to use and the best choice to use with CNC machines, 3D printers, Engravers and other machines. After insert Arduino CNC shield V3.0 into the Arduino Uno, and install GRBL firmware then you can quickly DIY a CNC engraving machine. \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCoolant enable\u003c\/li\u003e\n\u003cli\u003eUses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)\u003c\/li\u003e\n\u003cli\u003e2 x End stops for each axis (6 in total)\u003c\/li\u003e\n\u003cli\u003eCompact design.\u003c\/li\u003e\n\u003cli\u003eStepper Motors can be connected with 4 pin molex connectors or soldered in place.\u003c\/li\u003e\n\u003cli\u003eJumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1\/32 micro-stepping )\u003c\/li\u003e\n\u003cli\u003ePlease note that this is an unassembled kit and needs soldering.\u003c\/li\u003e\n\u003cli\u003eLatest Arduino CNC Shield Version 3.10\u003c\/li\u003e\n\u003cli\u003eRuns on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)\u003c\/li\u003e\n\u003cli\u003ePWM Spindle and direction pins\u003c\/li\u003e\n\u003cli\u003e4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)\u003c\/li\u003e\n\u003cli\u003eGRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156203909163,"sku":"IHCM438","price":180.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/A4988-DRV8825-CNC-Shield-V3-for-Engravers-3D-printers.jpg?v=1655366195"},{"product_id":"sensor-shield-v5-for-uno-r3","title":"Arduino Sensor Shield V5 Expansion Board","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eRetain the merits of the V4.0 version\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eLaminated design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ePCB immersion gold processing technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eIIC interface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBluetooth module communication interface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSD card module communication interface\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eRetain the merits of the V4.0 version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eLaminated design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePCB immersion gold processing technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eIIC interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth module communication interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSD card module communication interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eAPC220 wireless rf modules communication interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eRB URF v1.1 ultrasonic sensors interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e12864 LCD string of line and parallel interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e32 servo controller interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eEach functional module has a buckled port with VCC, GND, and Output, which has a corresponding port on the Sensor Shield, connected with a pin 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure, and more professional looking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ejust plug \u0026amp; play.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage : 5VDC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eInput Voltage : 7-12VDC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eBuckled Analog Port : Handy, solid connection to 6 Analog inputs with VCC\/GND.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eDigital IO port : 13 ports prepared for digital modules or servos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eAnalog IO Port : 2.54 grid male pin header connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eBuckled Communication Port : Selectable between I2C and UART.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156204498987,"sku":"IHCM398","price":149.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/IHCM398.jpg?v=1655366188"},{"product_id":"camera-module-for-arduino","title":"Camera Module OV7670 for Arduino","description":"\u003cul\u003e\n\u003cli\u003eOperating Power: 60mW\/15fpsVGAYUV.\u003c\/li\u003e\n\u003cli\u003eSleeping Mode: \u0026lt;20 uA.\u003c\/li\u003e\n\u003cli\u003eLens Size: 1\/6″.\u003c\/li\u003e\n\u003cli\u003eMax. Frame Rate: 30fps VGA.\u003c\/li\u003e\n\u003cli\u003eSensitivity: 1.3V \/ (Lux-sec).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eOV7670 640X480 VGA CMOS CAMERA IMAGE SENSOR MODULE is a low-cost image sensor, DSP that can operate at a maximum of 30 fps and 640 x 480 (“VGA”) resolutions, equivalent to 0.3 Megapixels.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156204564523,"sku":"IHCM397","price":169.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/Module-Camera-OV7670-Compatible-Arduino-Best-buy-tunisie-prix-tunisie-1.jpg?v=1732305087"},{"product_id":"pc817-2-channel-optocoupler-isolation-board-voltage-converter-adapter-module","title":"PC817 2 Channel Optocoupler Isolation Board Voltage Converter Adapter Module","description":"\u003cul\u003e\n\u003cli\u003eDriving Port Signal Voltage:3.6-24V\u003c\/li\u003e\n\u003cli\u003eOutput Port Voltage Port:3.6-30V\u003c\/li\u003e\n\u003cli\u003eJumper Cap Can Achieve Output Port Is High POtential Or Pull Down Output\u003c\/li\u003e\n\u003cli\u003eOnboard 2-Channel 817 Are Independent:can achieve different voltage control at then same time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a PC817 2-Channel Optocoupler Isolation Board. Onboard with 2-Channel 817 are independent, so can achieve different voltage control at the same time. Using 2-way 817 optocoupler, to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface. \u003cbr\u003eFeatures :Using 2-way 817 optocoupler, to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156274524203,"sku":"5911","price":99.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/615159XIIoL._SL1360.jpg?v=1655367191"},{"product_id":"usb-host-shield-compatible-with-arduino","title":"USB Host Shield compatible with Arduino","description":"\u003col\u003e\n\u003cli\u003eWorks with standard (dual 5\/3.3V) and 3.3V-only (for example, Pro Arduino) boards.\u003c\/li\u003e\n\u003cli\u003eOperates over the extended -40°C to +85°C temperature range\u003c\/li\u003e\n\u003cli\u003eComplies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-\/Low-Speed 12Mbps\/1.5Mbps Host)\u003c\/li\u003e\n\u003cli\u003eSupports HID devices, such as keyboards, mice, joysticks, etc.\u003c\/li\u003e\n\u003cli\u003eCompatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eUSB Host shield adds USB Host capabilities to the Arduino board. They are large no of USB Host shield which is available in the market but the only problem is that you have to choose the right host\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eshield\u003cem\u003e.\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eBefore using that, first of all, you should know, what is a USB Host shield? The USB protocol defines two types of devices.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOne is called the host (or server) and the other one is called peripheral (client). The Host device controls the peripheral device and also provides power to it. When you connect any USB device like a mouse or a keyboard to your computer, your computer acts as the host and controls (or polls) the client device (keyboard or mouse or even an Arduino).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFor a successful communication to happen using USB protocol, you need at least one of the device to be the host, which means that you cannot connect two keyboards together and expect them to communicate with each other.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eSupports the Google Android ADK, supporting Android phone: G1, Nexus One, Nexus S, \u003c\/strong\u003e\u003cstrong\u003eMotorola Droid X. Provides APK package, and compiled source files ADK Compatible \u003c\/strong\u003e\u003cstrong\u003ewith Arduino and compatible with the following hardware:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eUno Arduino\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMEGA Arduino\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eAllowing you to control the following devices:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003eHID Compliant devices such as Keyboard, mouse etc.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eCompatible with the Android ADK\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDigital SLR cameras such as Canon, Nikon, Powershot, etc.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eGame console controllers including the Wii controller.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eOther USB serial communication devices such as GPS, FTDI etc.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156278226987,"sku":"","price":899.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/adk-usb-host-shield-compatible-with-arduino-800x800-1.jpg?v=1655367240"},{"product_id":"arduino-nano-without-solder","title":"Arduino Nano Board R3 with CH340 chip (without solder)","description":"\u003cul\u003e\n\u003cli\u003eOperating Voltage (logic level): 5V\u003c\/li\u003e\n\u003cli\u003e8 analog inputs ports: A0 ~ A7\u003c\/li\u003e\n\u003cli\u003e14 Digital input \/ output ports: TX, RX, D2 ~ D13\u003c\/li\u003e\n\u003cli\u003e1 pair of TTL level serial transceiver ports RX \/ TX\u003c\/li\u003e\n\u003cli\u003eUsing Atmel Atmega328P-AU MCU\u003c\/li\u003e\n\u003cli\u003eStandard 0.1” spacing DIP (breadboard friendly).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003ePackage Includes :\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nano Board R3 with CH340 chip without USB Cable chipboard is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint.\u003c\/p\u003e\n\u003cp\u003eThe Nano Board R3 with CH340 chip without USB Cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.\u003c\/p\u003e\n\u003cp\u003eThis Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Arduino Nano.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156281700395,"sku":"0015","price":198.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/1-26_da002b0f-a682-4bf8-97fc-3fa08fcb1f3c.jpg?v=1655367308"},{"product_id":"arduino-pro-mini-atmega-328p-5v-16mhz","title":"Arduino Pro Mini ATMEGA328P 5V \/ 3.3v  16Mhz PROMINI Compatible","description":"\u003cul\u003e\n\u003cli\u003eMicrocontroller: ATmega328P\u003c\/li\u003e\n\u003cli\u003eCircuit Operating Voltage: 5V\u003c\/li\u003e\n\u003cli\u003eClock frequency: 16MHz.\u003c\/li\u003e\n\u003cli\u003e6 PWM port: D3, D5, D6, D9, D10, D11.\u003c\/li\u003e\n\u003cli\u003eUse For Atmel Atmega328P-AU microcontroller.\u003c\/li\u003e\n\u003cli\u003eSupport serial download.\u003c\/li\u003e\n\u003cli\u003eSupport 9V battery.\u003c\/li\u003e\n\u003cli\u003eA pair of TTL level serial port transceiver : RX \/ TX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is Pro Mini 5V\/16MHz is a 5V Arduino running the 16MHz boot-loader. Pro Mini ATMEGA328P come without connectors.\u003c\/p\u003e\n\u003cp\u003eIt’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.\u003c\/p\u003e\n\u003cp\u003eThe Pro Mini is a micro-controller board base on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.\u003c\/p\u003e\n\u003cp\u003eA six pin header can be connected to an FTDI cable to provide USB power and communication to the board. The Pro Mini Arduino is intended for semi-permanent installation in objects or exhibitions. The pin layout is compatible with the Mini Arduino.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156281831467,"sku":"IHCM29","price":299.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/arduino-pro-mini.jpg?v=1655367334"},{"product_id":"arduino-leonardo-r3-board-clone-model","title":"Arduino Leonardo R3 Board - Compatible Model","description":"\u003cul\u003e\n\u003cli\u003eMicrocontroller: ATmega32u4 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 5V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Voltage:7-12V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Voltage (limits): 6-20V \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins: 20 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePWM Channels: 7 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog Input Channels: 12 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Current per I\/O Pin: 40 mA \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Current for 3.3V Pin: 50 mA \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlash Memory: 32 KB \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSRAM: 2.5 KB (ATmega32u4) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEEPROM: 1 KB (ATmega32u4) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eClock Speed: 16 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Arduino Leonardo is an open source precise microcontroller board based on the ATmega32U4 SMD chip. It has 23 digital input\/output pins (of which 7 can be used as PWM outputs and 12 can be used as analog inputs), a 16 MHz crystal, a USB connection, a power jack, an in-circuit system programming (ICSP) header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer (or appropriate wall power adapter) with a Micro USB cable or power it with a AC-to-DC adapter or battery to get started.\u003c\/p\u003e\n\u003cp\u003eThe Leonardo differs from all preceding Arduino boards in that the user-programmable ATmega32U4 AVR microcontroller has built-in USB functionality, eliminating the need for a secondary processor. This makes the Leonardo more versatile: in addition to supporting a virtual (CDC) serial\/COM port interface, it can appear to a connected computer as a mouse and keyboard.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156281929771,"sku":"64","price":549.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/arduino_leonardo_r3_board11-550x550.png?v=1765955188"},{"product_id":"ethernet-shield-for-nano-enc28j60","title":"Ethernet Shield for Nano (without Nano)","description":"\u003cp\u003e\u003cspan\u003eThis Nano Ethernet Shield allows you to connect the Arduino Nano to a network. It is assembled with long stackable pin headers, and don’t need to solder the headers separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Nano Ethernet Shield is based on the ENC28J60 Ethernet chip which provides a network (IP) stack capable of both TCP and UDP. Use the Ethernet library to write sketches that connect to the internet using the add-on module.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eENC28J60 is a 10BASE-T stand-alone Ethernet unit with on board MAC \u0026amp; PHY, 8 Kbytes of Buffer RAM, and an SPI serial interface for 3.3V and 5V logic. With small size the Nano Ethernet Shield minimizes complexity, board space, and cost. Target applications include VoIP, Industrial Automation, Building Automation, Home Control, Security, and Instrumentation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eShield use power 5V  from Nano board and convert to 3.3V (on shield have 3.3V LDO). \u003c\/span\u003e\u003cspan\u003eWith this Ethernet Shield, your Arduino Nano board can be used to connect to the internet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eController: Microchip's ENC28J60 ethernet \/ HR911105A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorks as server or client\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eComes with efficient library and examples\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect plug puzzle board, NO soldering needed.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003ePackage Includes:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1 x Nano Ethernet Shield\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156282617899,"sku":"","price":499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/ethernetnano.jpg?v=1689671040"},{"product_id":"proto-shield-prototype-for-arduino-uno-with-mini-breadboard","title":"Proto Shield (Prototype) for Arduino UNO with mini Breadboard","description":"\u003cp\u003eIt has a nice standard 0.1\"x0.1\" prototying grid with big pads\n\u003cbr\u003eComes with Stacking headers and plain header, choose whichever you want when soldering together\n\u003cbr\u003eA IC pattern for adding DIP ICs up to 20 pins\n\u003cbr\u003ePower rails down the middle and sides\n\u003cbr\u003eA reset button and an extra general use button\n\u003cbr\u003e2 3mm general use LEDs, red and green, as well as 2 matching resistors\n\u003cbr\u003eA pass-thru ICSP stacking header so you can stack any kind of shield on top, and\/or use an AVR programmer\n\u003cbr\u003eA surface-mount chip area for up to 14 SOIC size parts\n\u003cbr\u003eCompatible with tiny breadboards\n\u003cbr\u003eEvery pin is brought out!\n\u003cbr\u003eGold plated pads\n\u003cbr\u003e2 x 0.1uF capacitors on either side for extra power stability\u003c\/p\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eArduino UNO Prototype Shield is used in the cases where you want to build more applications without using any external Breadboard.The Prototyping Shield is designed to facilitate easy prototyping with an Arduino or an Arduino compatible board. It provides prototyping board space to build custom circuits and is great to build custom projects with the Arduino. All IO pins of the Arduino can be tapped into through header pins and empty solder pads for easy expansion.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156282683435,"sku":"","price":250.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Breadboard.jpg?v=1655367274"},{"product_id":"arduino-uno-smd-version-without-cable","title":"Arduino UNO R3 SMD Atmega328P","description":"\u003cp\u003e\u003cstrong\u003eMicrocontroller ATmega328P CH340\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage 5V\u003c\/li\u003e\n\u003cli\u003eInput Voltage (recommended) 7-12V\u003c\/li\u003e\n\u003cli\u003eInput Voltage (limit) 6-20V\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins 14 (of which 6 provide PWM output)\u003c\/li\u003e\n\u003cli\u003ePWM Digital I\/O Pins 6\u003c\/li\u003e\n\u003cli\u003eAnalog Input Pins 6\u003c\/li\u003e\n\u003cli\u003eDC Current per I\/O Pin 20 mA\u003c\/li\u003e\n\u003cli\u003eDC Current for 3.3V Pin 50 mA\u003c\/li\u003e\n\u003cli\u003eFlash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader\u003c\/li\u003e\n\u003cli\u003eSRAM 2 KB (ATmega328P)\u003c\/li\u003e\n\u003cli\u003eEEPROM 1 KB (ATmega328P)\u003c\/li\u003e\n\u003cli\u003eClock Speed 16 MHz\u003c\/li\u003e\n\u003cli\u003eLED_BUILTIN 13\u003c\/li\u003e\n\u003cli\u003eLength 68.6 mm\u003c\/li\u003e\n\u003cli\u003eWidth 53.4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eArduino Uno is a microcontroller board based on the ATmega328P . It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. You can tinker with your Uno without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again. \u003cbr\u003e\"Uno\" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156293103659,"sku":"","price":249.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Arduino-Uno-smd.jpg?v=1655367438"},{"product_id":"arduino-nano-33-ble-sense","title":"Original Arduino Nano 33 BLE Sense Rev2 (ABX00069)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor: nRF52840 (\u003ca href=\"https:\/\/content.arduino.cc\/assets\/Nano_BLE_MCU-nRF52840_PS_v1.1.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003edatasheet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eMicrocontroller: nRF52840\u003c\/li\u003e\n\u003cli\u003eSecurity: ECC608 crypto chip\u003c\/li\u003e\n\u003cli\u003eFlash: 1MB\u003c\/li\u003e\n\u003cli\u003eRAM: 256KB\u003c\/li\u003e\n\u003cli\u003eCircuit voltage 3.3V\u003c\/li\u003e\n\u003cli\u003eSensors onboard: digital microphone, 6-axis accelerometer, pressure humidity, temperature, gesture recognition.\u003c\/li\u003e\n\u003cli\u003eBluetooth pairing via NFC.\u003c\/li\u003e\n\u003cli\u003eEmbedded Artificial Intelligence, running Edge Computing applications (AI) on it using TinyML.\u003c\/li\u003e\n\u003cli\u003eThe communications chipset on the Nano 33 BLE Sense can be both a BLE and Bluetooth client and host device.\u003c\/li\u003e\n\u003cli\u003e9-axis inertial sensor that makes this board ideal for wearable devices.\u003c\/li\u003e\n\u003cli\u003eHumidity, and temperature sensors: to get highly accurate measurements of the environmental conditions.\u003c\/li\u003e\n\u003cli\u003eBarometric sensor by which you could make a simple weather station.\u003c\/li\u003e\n\u003cli\u003eMicrophone to capture and analyze sound in real-time.\u003c\/li\u003e\n\u003cli\u003eGesture, proximity, light color, and light intensity sensor that estimates the room’s luminosity, but also whether someone is moving close to the board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM Cortex -M4 CPU running at 64 MHz. This will allow you to make larger programs than with the Arduino Uno (it has 1MB of program memory, 32 times bigger), and with a lot more variables (the RAM is 128 times bigger). The main processor includes other amazing features like Bluetooth pairing via NFC and ultra-low power consumption modes.\u003c\/p\u003e\n\u003cp\u003eThe Nano 33 BLE Sense is Arduino’s 3.3V AI-enabled board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE Sense is a completely new board on a well-known form factor. It comes with a series of embedded sensors.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote FYI:\u003c\/strong\u003e Arduino officials have replaced \u003cstrong\u003eLSM9DS1 (9 axis)\u003c\/strong\u003e with a combination of two IMUs (BMI270 – 6 axis IMU and BMM150 – 3 axis IMU).  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReason for change\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eThe IMU (LSM9DS1), the temperature sensor (HTS221), and the power supply (MPM3610) are replaced due to a shortage of these components.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe additional jumper and test points are added to improve the customer experience.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e1 x Original Arduino Nano 33 BLE Sense Rev2\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":40156297986091,"sku":"ABX00069","price":3799.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/ABX00069_04.unbox_643x483_0ba58b5f-4f7d-462d-af05-b06e56f5f14d.jpg?v=1690015967"},{"product_id":"ramps-1-4-3d-printer-controller-board-arduino-mega-shield","title":"RAMPS 1.4 3D Printer Controller Board","description":"\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e \t\u003cli\u003eSupply Voltage: 12V\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eStandard interfaces (as that of the extruder)\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eReserved GCI like I2C and RS232\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003e3 MOSFET’s are applied to the heater\/ fan and thermistor circuit.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eAnother 5A added to protect the component parts.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThe RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty of room for expansion.\u003c\/p\u003e\n\n\u003cp\u003eRAMPS can only work when connected to its motherboard Mega 2560 and A4988\/DRV8825. Owning to its stability in operation and great compatibility with the most 3D printer . The combination of Ramps1.4 + MEGA2560 + A4988\/DRV8825 is becoming a mainstream of DIY 3D printer control board.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications \u0026amp; Features of RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield :-\n\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e \t\u003cli\u003eSupply Voltage: 12V\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eStandard interfaces (as that of the extruder)\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eReserved GCI like I2C and RS232\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003e3 MOSFET’s are applied to the heater\/ fan and thermistor circuit.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eAnother 5A added to protect the component parts.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eAn 11A fuse is added to the hotbed.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eSupport 5 stepper drive board\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eI2C and SPI are reserved for expanding\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eAll the MOSFET can be controlled by PWM\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eUse the interface of the servo motor to adjust the level of the printing platform automatically.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eAdding an SD module for SD ramps module.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eLED can indicate the status of the heater (the open and close of MOS).\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eExpandable to control other accessories.\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003e2 stepper motor for Z axis in parallel.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156299427883,"sku":"","price":449.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/ramps-1.4-3d-printer-controller-board-800x800-1.jpg?v=1655367637"},{"product_id":"enc28j60-ethernet-lan-module","title":"ENC28J60 Ethernet LAN Module","description":"\u003cul\u003e\n\u003cli\u003eENC28J60 Ethernet chips, SOP28 package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSPI Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e1x10 connector, can be easily mounted with the MCU\u003c\/li\u003e\n\u003cli\u003eBuilt-in isolation transformer RJ45 connectors HR911105A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ENC28J60 is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface. It is designed to serve as an Ethernet network interface for any controller equipped with SPI.\u003c\/p\u003e\n\u003cp\u003eENC28J60 Ethernet Module utilizes the Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:- \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eENC28J60 Ethernet chips, SOP28 package\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSPI Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x10 connector, can be easily mounted with the MCU\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in isolation transformer RJ45 connectors HR911105A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower LED\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSingle Supply: +3.3 V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e25Mhz Crystal\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB size: 48x18 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156301262891,"sku":"5759","price":349.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/ethernet-module-800x800-1.jpg?v=1655367725"},{"product_id":"proto-shield-for-arduino-kit-stackable-version-r3","title":"Proto Shield for Arduino Kit - Stackable Version R3","description":"\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e \t\u003cli\u003eIC pattern for adding DIP ICs up to 20 pins\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003ePower rails down the middle and sides\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eA reset button and an extra general use button\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eA surface-mount chip area for up to 14 SOIC size parts\u003c\/li\u003e\n\u003cbr\u003e \t\u003cli\u003eCompatible with tiny breadboards\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e--\u003cbr\u003e\u003cp\u003eThis prototyping shield is the best out there (well, we think so, at least), and now is even better with \u003cstrong\u003eVersion R3\u003c\/strong\u003e - updated for the most compatibility with just about all the Arduinos!\u003c\/p\u003e\n\n\u003cp\u003eIt works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos. Yun's and Arduino Ethernets have a chunky Ethernet jack that gets in the way of stacking, you can use the stacking headers included and it will work, just doesn't sit nice and flat.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156301623339,"sku":"","price":149.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Adafruit-2077-30091171-01.jpg?v=1655367733"},{"product_id":"unowifi-r3-atmega328pnodemsu-esp8266-8mb-memory-usb-ttl-ch340g-compatible-for-arduino-uno","title":"Uno + WiFi R3 AtMega328p + NodeMCU ESP8266 8mb Memory USB-TTL CH340G","description":"\u003col\u003e\n\u003cli\u003eUSB-TTL converter.\u003c\/li\u003e\n\u003cli\u003eLogic Level: 5V.\u003c\/li\u003e\n\u003cli\u003eOperating Supply Voltage: 5V.\u003c\/li\u003e\n\u003cli\u003eDigital I\/O Pins: 14.\u003c\/li\u003e\n\u003cli\u003eAnalog I\/O Pins: 6.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eUno+WiFi R3 AtMega328p+NodeMSU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO is full integration on one board: Uno R3 ATmega 328 and WiFi ESP8266 with memory 8Mb (MegaByte). All of the modules can work together or separately. And everyone has their own pinout headers.\u003c\/p\u003e\n\u003cp\u003eThe convenient solution for the development of new projects requiring Uno and Wi-Fi. Via USB you can update sketches and firmware for ATmega328  and for ESP8266 . For this onboard have the USB-serial converter CH340G.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156317679659,"sku":"0007","price":539.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/99_7a71e4b5-e001-4c51-8350-7b613c48d349.png?v=1655367910"},{"product_id":"9-in-1-multi-function-expension-board-dht11-temperature-lm35-with-uno-sunleph","title":"9 IN 1 Multi-function Expension Board Shield for Uno","description":"\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eDHT11 \/ LM35 \/ Buzzer \/ Humidity \/ Ir Receiver \/ Potentiometer \/ LED \/ Switch \/ LDR\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFully compatible with UNO R3 interfaces, Providing Ard beginners basic experimental module.\u003c\/li\u003e\n\u003cli\u003eA board integrates various modules function\u003c\/li\u003e\n\u003cli\u003eNo welding, no connection, you can download the program directly to complete the experiment\u003c\/li\u003e\n\u003cli\u003eProvide all the module code library files, all tested and can be used directly\u003c\/li\u003e\n\u003cli\u003eSet aside expansion port, you can complete other modules experiment\u003c\/li\u003e\n\u003cli\u003eThe high row pin design will avoid contact with the USB port of the UNO board, so prevent from occur short circuit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis Arduino Compatible board is a great way to learn the interfacing of sensors with the Arduino. This Module features 9 different types of sensors on a single PCB. The board plugs right on top of the Arduino Uno.\u003c\/p\u003e\n\u003cp\u003eThe board has an onboard DHT11 temperature and humidity sensor, an LM35 temperature sensor, an IR receiver, RGB led, etc which are accessible through the I\/O pins of the Arduino.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40156317777963,"sku":"0183","price":499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/2.png?v=1673262160"},{"product_id":"screw-shield-v2","title":"Screw Shield V2 Terminal Expansion Board","description":"\u003ch4\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eI\/O Screw terminals.\u003c\/li\u003e\n\u003cli\u003eDirectly plug-able.\u003c\/li\u003e\n\u003cli\u003eArduino Compatible.\u003c\/li\u003e\n\u003cli\u003eCompatible with Arduino UNO R3, Arduino UNO\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe Screw Shields V2 Terminal Expansion Board that allows you to screw in jumper wires to a screw terminal for a much stronger and secure connection for your I\/O and power pins. Feel secure with this Arduino-compatible screw shield. The user can also overlay on top of other expansion boards. Let your project to get rid of the shackles of the breadboard wiring, the line structures become easier and more reliable.\u003c\/p\u003e\n\u003cp\u003eThe terminal expansion board not only can magically expand the terminal controller but also can overlap other expansion boards by the user, which can let your Arduino program get rid of to be connected by the breadboard and make the line up more comfortable and reliable.\u003c\/p\u003e\n\u003cp\u003eIt extends the power supply pins for the signal pins. You could directly connect the sensors \u0026amp; devices to the screw shield v2. The pin headers are also provided \u0026amp; this means you can connect expansion board on top of this shield.\u003c\/p\u003e\n\u003cp\u003eThe Expansion Board is compatible with Arduino UNO\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40177887117355,"sku":"0173","price":249.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/screw-shields-v2-terminal-expansion-board-2-550x550.webp?v=1764841188"},{"product_id":"dc-stepper-motor-hat-for-raspberry-pi-mini-kit","title":"Adafruit DC \u0026 Stepper Motor HAT","description":"\u003cp data-mce-fragment=\"1\"\u003eLet your robotic dreams come true with the new DC+Stepper Motor .This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSince the Raspberry Pi does not have a lot of PWM pins, we use a\u003cstrong\u003e \u003c\/strong\u003efully-dedicated PWM driver chip\u003cstrong\u003e \u003c\/strong\u003eonboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA \u0026amp; SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or Hat to the same pins.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":40182357655595,"sku":"","price":3500.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Capture_28807d2b-aa7d-4125-a4d2-f2245f78aabb.png?v=1656399754"},{"product_id":"original-arduino-nano-33-ble-board-with-header","title":"Original ARDUINO NANO 33 BLE Board (With Header) (ABX00034)","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMicrocontroller: nRF52840 (\u003ca data-mce-fragment=\"1\" href=\"https:\/\/content.arduino.cc\/assets\/Nano_BLE_MCU-nRF52840_PS_v1.1.pdf\" data-mce-href=\"https:\/\/content.arduino.cc\/assets\/Nano_BLE_MCU-nRF52840_PS_v1.1.pdf\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003edatasheet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRadio module: u-blox NINA-W102\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSecure Element  : ATECC608A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating Voltage: 3.3V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput Voltage (limit) : 21V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDC Current per I\/O Pin: 7 mA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClock Speed: 48MHz\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e9 axis inertial sensor: what makes this board ideal for wearable devices\u003c\/li\u003e\n\u003cli\u003ehumidity, and temperature sensor: to get highly accurate measurements of the environmental conditions\u003c\/li\u003e\n\u003cli\u003ebarometric sensor: you could make a simple weather station\u003c\/li\u003e\n\u003cli\u003emicrophone: to capture and analyze sound in real-time\u003cbr\u003e\u003cbr\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Nano 33 BLE (with Soldered Headers) is Arduino’s 3.3V compatible board in the smallest available form factor: 45x18mm!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis boars is an upgrade to Arduino NANO with ease of use of a Nano board with the addition of secure IoT and BT connectivity. This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low-power architecture makes it a practical and cost-effective solution for your connected projects.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Arduino Nano 33 BLE is a completely new board on a well-known form factor. It comes with an embedded 9-axis inertial sensor which makes this board ideal for wearable devices, but also for a large range of scientific experiments in the need of short-distance wireless communication.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Arduino Nano 33 BLE is an evolution of the traditional Arduino Nano, but features a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM Cortex-M4 CPU running at 64 MHz. This will allow you to make larger programs than with the Arduino Uno (it has 1MB of program memory, 32 times bigger), and with a lot more variables (the RAM is 128 times bigger). The main processor includes other amazing features like Bluetooth pairing via NFC and ultra-low power consumption modes.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Nano 33 BLE comes with a 9 axis inertial measurement unit (IMU) which means that it includes an accelerometer, a gyroscope, and a magnetometer with 3-axis resolution each. This makes the Nano 33 BLE the perfect choice for more advanced robotics experiments, exercise trackers, digital compasses, etc.\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBluetooth and BLE\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe communications chipset on the Nano 33 BLE can be both a BLE and Bluetooth client and host device. Something pretty unique in the world of microcontroller platforms. If you want to see how easy it is to create a Bluetooth central or a peripheral device, explore the examples at our\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.arduino.cc\/en\/Reference\/ArduinoBLE\" data-mce-href=\"https:\/\/www.arduino.cc\/en\/Reference\/ArduinoBLE\" target=\"_blank\"\u003eArduinoBLE library\u003c\/a\u003e.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":40205979910187,"sku":"ABX00034","price":2550.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/NANOBLEO.jpg?v=1657089893"},{"product_id":"original-arduino-mega-2560-atmega2560-mcu-rev3","title":"Original Arduino Mega 2560 ATmega2560 MCU Rev3 (A000067)","description":"\u003col class=\"firstList\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufacturer: Arduino Official\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOfficial Arduino Board with 3-Month brand Warranty\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eATmega16U2 instead 8U2 as USB to serial converter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStronger RESET circuit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5V operating voltage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e40mA DC current per I\/O pin\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e256KB flash memory of which 8KB used by bootloader\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e8KB SRAM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4KB EEPROM\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":40205987184683,"sku":"A000067","price":3499.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Arduino-Mega-2560-ATmega2560.webp?v=1667813638"},{"product_id":"orginal-arduino-leonardo-with-headers","title":"Orginal Arduino Leonardo (A000057)","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eATmega32u4 Microcontroller\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput Voltage: 7-12V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e20 Digital I\/O Pins\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e7 PWM Channels\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e12 ADCs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e16MHz Clock Speed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e32 KB Flash Memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMicrocontroller ATmega32u4\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating Voltage 5V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput Voltage (recommended) 7-12V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInput Voltage (limits) 6-20V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDigital I\/O Pins 20\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePWM Channels 7\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnalog Input Channels 12\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDC Current per I\/O Pin 40 mA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDC Current for 3.3V Pin 50 mA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSRAM 2.5 KB (ATmega32u4)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEEPROM 1 KB (ATmega32u4)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClock Speed 16 MHz \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cspan\u003e The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input\/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial \/ COM port. It also has other implications for the behaviour of the board.\u003c\/span\u003e\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":40206001209387,"sku":"A000057","price":2599.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/LEONARDO.jpg?v=1657090604"},{"product_id":"original-arduino-nano-every","title":"Original Arduino Nano Every (ABX00028)","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli class=\"productView-table-header\" data-mce-fragment=\"1\"\u003eManufacturer: Arduino\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"productView-table-header\" data-mce-fragment=\"1\"\u003eMCU: ATMega4809\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"productView-table-header\" data-mce-fragment=\"1\"\u003eClock Speed: 20MHz\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"productView-table-header\" data-mce-fragment=\"1\"\u003eFlash: 48KB\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"productView-table-header\" data-mce-fragment=\"1\"\u003eEEPROM: 256byte\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"productView-table-header\" data-mce-fragment=\"1\"\u003eSRAM: 6KB\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe Nano Every is an Original Arduino’s 5V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano Every is an evolution of the traditional Arduino Nano board but features a lot more powerful processor, the ATMega4089. This will allow you to make larger programs than with the Arduino Uno (it has 50% more program memory), and with a lot more variables (the RAM is 200% bigger).\u003c\/p\u003e\n\u003cp\u003eIf you used Arduino Nano in your projects in the past, the Original Arduino Nano Every is a pin-equivalent substitute. Your code will still work, and you will NOT need to re-wire those motors you planned in your original design. The main differences are a better processor and a micro-USB connector.\u003c\/p\u003e\n\u003cp\u003eThe board comes in two options: with or without headers, allowing you to embed the Nano Every inside any kind of invention, including wearables. The board comes with tessellated connectors and no components on the B-side. These features allow you to solder the board directly onto your own design, minimizing the height of your whole prototype.\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":40206018478123,"sku":"ABX00028","price":1199.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Arduino-Nano-Every-4.jpg?v=1657091126"},{"product_id":"original-arduino-nano-rp2040-connect","title":"Original Arduino Nano RP2040 Connect (ABX00052)","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e133MHz 32bit Dual Core Arm Cortex-M0+ Processor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e264kB on-chip SRAM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eU-Blox Nina W102 WiFi\/Bluetooth Module\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e240MHz 32bit Dual Core Xtensa LX6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e520kB on-chip SRAM\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures and Specifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch5\u003e\u003cstrong\u003eRaspberry Pi RP2040 Microcontroller:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e133MHz 32bit Dual Core Arm Cortex-M0+\u003c\/li\u003e\n\u003cli\u003e264kB on-chip SRAM\u003c\/li\u003e\n\u003cli\u003eDirect Memory Access (DMA) controller\u003c\/li\u003e\n\u003cli\u003eSupport for up to 16MB of off-chip Flash memory via dedicated QSPI bus\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 controller and PHY, with host and device support\u003c\/li\u003e\n\u003cli\u003e8 PIO state machines\u003c\/li\u003e\n\u003cli\u003eProgrammable IO (PIO) for extended peripheral support\u003c\/li\u003e\n\u003cli\u003e4 channel ADC with internal temperature sensor, 0.5 MSa\/s, 12-bit conversion\u003c\/li\u003e\n\u003cli\u003eSWD Debugging\u003c\/li\u003e\n\u003cli\u003e2 on-chip PLLs to generate USB and core clock\u003c\/li\u003e\n\u003cli\u003e40nm process node\u003c\/li\u003e\n\u003cli\u003eMultiple low power mode support\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 Host\/Device\u003c\/li\u003e\n\u003cli\u003eInternal Voltage Regulator to supply the core voltage\u003c\/li\u003e\n\u003cli\u003eAdvanced High-performance Bus (AHB)\/Advanced Peripheral Bus (APB)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003eU-blox® Nina W102 WiFi\/Bluetooth Module:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e240MHz 32bit Dual Core Xtensa LX6\u003c\/li\u003e\n\u003cli\u003e520kB on-chip SRAM\u003c\/li\u003e\n\u003cli\u003e448 Kbyte ROM for booting and core functions\u003c\/li\u003e\n\u003cli\u003e16 Mbit FLASH for code storage including hardware encryption to protect programs\u003cbr\u003eand data\u003c\/li\u003e\n\u003cli\u003e1 kbit EFUSE (non-erasable memory) for MAC addresses, module configuration,\u003c\/li\u003e\n\u003cli\u003eFlash-Encryption, and Chip-ID\u003c\/li\u003e\n\u003cli\u003eIEEE 802.11b\/g\/n single-band 2.4 GHz WiFi operation\u003c\/li\u003e\n\u003cli\u003eBluetooth 4.2\u003c\/li\u003e\n\u003cli\u003eIntegrated Planar Inverted-F Antenna (PIFA)\u003c\/li\u003e\n\u003cli\u003e4x 12-bit ADC\u003c\/li\u003e\n\u003cli\u003e3x I2C, SDIO, CAN, QSPI\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003eMemory:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eAT25SF128A 16MB NOR Flash\u003c\/li\u003e\n\u003cli\u003eQSPI data transfer rate up to 532Mbps\u003c\/li\u003e\n\u003cli\u003e100K program\/erase cycles\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":40206035583019,"sku":"ABX00052","price":2499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Arduino-Nano-RP2040-Connect.jpg?v=1657091548"},{"product_id":"dfrobot-beetle-ble-the-smallest-board-based-on-arduino-uno-with-bluetooth-4-0","title":"DFRobot Beetle BLE – The Smallest Board Based on Arduino Uno with Bluetooth 4.0","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eATmega328@16MHz\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBluetooth Low Energy (BT 4.0)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMicro USB port\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSuper Compact Size\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSupport Bluetooth HID and ibeacon\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003col\u003e\n\u003cli\u003eATmega328@16MHz\u003c\/li\u003e\n\u003cli\u003eBluetooth Low Energy (BT 4.0)\u003c\/li\u003e\n\u003cli\u003eMicro USB port\u003c\/li\u003e\n\u003cli\u003eSuper Compact Size\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth HID and ibeacon\u003c\/li\u003e\n\u003cli\u003eCompatible with all DFRobot Bluno Series\u003c\/li\u003e\n\u003cli\u003eSupport Wireless Programming\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":40206045478955,"sku":"","price":1899.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/DFRobot-Beetle-BLE-The-Smallest-Board-Based-on-Arduino-Uno-with-Bluetooth-4-1.jpg?v=1657091784"},{"product_id":"teensy-3-2-development-board","title":"Teensy 3.2 Development Board","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e256K Flash Memory, 64K RAM, 2K EEPROM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1x 12 bit DAC Analog output\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e34 Digital I\/O Pins (16 shared with analog)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e12 PWM outputs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e7 Timers for intervals\/delays, separate from PWM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUSB with dedicated DMA memory transfers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3 UARTs (serial ports)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSPI, 2x I2C, I2S, IR modulator\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eI2S (for the high-quality audio interface)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAN Bus\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReal Time Clock (with user-added 32.768 crystal and battery)\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40206049312811,"sku":"","price":2199.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/AD288-2.webp?v=1657091896"},{"product_id":"arduino-mega-protective-transparent-acrylic-case","title":"ARDUINO MEGA PROTECTIVE TRANSPARENT ACRYLIC CASE","description":"\u003cspan data-mce-fragment=\"1\"\u003eA super case to protect your Arduino MEGA 2560 R3 board. Constructed from 2.8mm crystal clear acrylic, Comprises 6 acrylic laser cut parts to completely protect your Arduino board, with mounting bolts for the Arduino and the case. Top of case is open to allow easy access to the various analog and digital headers without obstruction\u003c\/span\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40206952398891,"sku":"","price":159.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/megacase.webp?v=1657110294"},{"product_id":"mcp2515-can-module-tja1050-receiver-spi-51-single-chip-program-routine-arduino","title":"MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSupport CAN V2.0B technical standard, communication rate 1Mb \/ S.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eModule 5V DC power supply, SPI interface protocol control\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0 to 8 bytes long data field.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e8MHZ crystal oscillator\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e120Ω terminal resistance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUse High-speed CAN transceiver TJA1050\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImpedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe working current: typical 5mA, standby current 1 microamp. Except for the power indicator.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40222280581163,"sku":"5767","price":149.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/mcp2515.webp?v=1657622264"},{"product_id":"ble-nano-integrated-cc2540-bluetooth-module-with-soldering","title":"Arduino BLE Nano Integrated CC2540, Bluetooth Module with Header","description":"\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBLE chip: TICC2540\u003c\/li\u003e\n\u003cli\u003eWorking channel: 2.4G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eInterface: Micro-USB\u003c\/li\u003e\n\u003cli\u003eInput voltage: Micro-USB power supply, Vin6~12V, 5V\u003c\/li\u003e\n\u003cli\u003eMicroprocessor: ATmega328P-MU QFN32\u003c\/li\u003e\n\u003cli\u003eBootloader: Latest arduino1.8.8\u003c\/li\u003e\n\u003cli\u003ePin: two rows 2.54mm-15Pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBLE-Nano-Board has a main chip ATMEGA328P-MU QFN32, the latest bootloader (Arduino IDE 1.8.8) was burned down. It is fully compatible with the common nano board. BLE-Nano-Board is PIN-PIN with Arduino Nano V3.0, and share the same\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSuper small volume design, more convenient to use this PCB size is only 48mm*19mm, the pin is fully compatible with Nano V3.0, No Soldering is needed. The micro USB port is more convenient to use\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHigh-quality material and Technology is being used the Bluetooth is used TI CC2540 BLE (SOC) chip. Maximum support 1Mbps air data transfer rate, stable performance. Communication distance can reach 50M in an open environment.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMore convenient for application of BLE-Nano-Board integrates a CC2540 BLE module with Arduino nano v3.0 board, which is very convenient for Bluetooth wireless connect applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eFully compatible for Arduino Nano-V3.0 pins and usage\u003c\/li\u003e\n\u003cli\u003eTransmission distance: open distance 50m\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth host mode to automatically connect slaves\u003c\/li\u003e\n\u003cli\u003eSupport AT command to configure BLE\u003c\/li\u003e\n\u003cli\u003eSupport USB virtual serial port, hardware serial port, BLE three-way transparent transmission\u003c\/li\u003e\n\u003cli\u003eSupport master-slave switching\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40230423232555,"sku":"0023","price":1149.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/blenano.webp?v=1657880061"},{"product_id":"original-arduino-due","title":"Original Arduino Due Board (A000062)","description":"\u003col\u003e\n\u003cli\u003eA 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.\u003c\/li\u003e\n\u003cli\u003eCPU clock at 84Mhz\u003c\/li\u003e\n\u003cli\u003e96KBytes of SRAM\u003c\/li\u003e\n\u003cli\u003e512KBytes of flash memory for code\u003c\/li\u003e\n\u003cli\u003eA DMA controller, that can relieve the CPU from doing memory intensive tasks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Arduino Due\u003cspan\u003e \u003c\/span\u003eis a microcontroller board-based Original Arduino Due Board on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input\/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I\/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I\/O pin could damage the board.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Arduino Due board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.\u003c\/p\u003e\n\u003cp\u003eThe Due follows the 1.0 pinout:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTWI\u003c\/strong\u003e: SDA and SCL pins that are near to the AREF pin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIOREF\u003c\/strong\u003e: allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.\u003c\/li\u003e\n\u003cli\u003eAn unconnected pin, reserved for future use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"shop_attributes woocommerce-group-attributes-layout-2\" style=\"width: 501.5px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eModel Type\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003eArduino Due\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eMicrocontroller Chip\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003eAT91SAM3X8E\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eInput Voltage (limit)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e6-16V\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eInput Voltage(Recommended)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e7-12V\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eAnalog I\/O Pins\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e12\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eDigital I\/O Pins\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e54 (of which 12 provide PWM output)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eAnalog Output Pins\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e2 (DAC)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eClock Speed\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e84 MHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eFlash Memory\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e512 KB\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eSRAM\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e96\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eDC Current for 3.3V Pin (mA)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e800\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eDC Current per I\/O Pin (mA)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e130\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eOn Board LEDs\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003eYes\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eOperating Temperature (°C)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e-20 to 80\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eWeight (gm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e36\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eLength (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e102\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eWidth (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e54\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"alt\"\u003e\n\u003ctd class=\"attribute_name\" style=\"width: 234px;\"\u003eHeight (mm)\u003c\/td\u003e\n\u003ctd class=\"attribute_value\" style=\"width: 250.5px;\"\u003e\n\u003cp\u003e25\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":40370145558571,"sku":"","price":3999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/due.jpg?v=1661594622"},{"product_id":"expansion-adapter-breakout-board-io-shield-for-arduino-nano","title":"Expansion Adapter Breakout Board IO Shield for Arduino Nano","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with Arduino NANO\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll digital and analog pins breakout\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompact size;\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal power supply current support\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLeads all pins out, convenient for wiring and doing experiments.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe Nano 328P Expansion Adapter Breakout Board IO Shield acts as a breakout board for the Arduino Nano microcontroller. There are several different options for power input and the footprint of this board is the same as the Arduino Duemilanove.\u003c\/p\u003e\n\u003cp\u003eIn addition, each pinout includes 5V and GND pins for easy connection to sensors\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eservos. The unit comes fully assembled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-list-item\"\u003e Arduino Nano IO\u003cspan\u003e \u003c\/span\u003eExpansion Shield\u003cspan\u003e \u003c\/span\u003eis specifically designed to facilitate an easy connection between  Arduino Nano\u003cspan\u003e \u003c\/span\u003eand many other devices. In essence, it expands the Arduino Nano controller to link those devices in a simple and trouble-free manner.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eIt is a perfect companion of Nano breadboard and compatible with both Arduino Nano v2.x and v3.x.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eThe board offers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e14\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eI\/O Pin (servo type with GND, power, and signal).\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e8\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eanalog Pin with power output and GND.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ePWM Pin.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eServo power input.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eI2C expansion Pin.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eAREF output.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e3.3V output.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eCompatible with Arduino NANO.\u003c\/li\u003e\n\u003cli\u003eAll digital and analog pins breakout.\u003c\/li\u003e\n\u003cli\u003eCompact size.\u003c\/li\u003e\n\u003cli\u003eExternal power supply current support.\u003c\/li\u003e\n\u003cli\u003eLeads all pins out, convenient for wiring and doing experiments.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40371197247531,"sku":"163","price":109.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/Arduino_NANO_expansion.webp?v=1661601606"},{"product_id":"mega-wifi-r3-atmega2560-nodemcu-esp8266-32mb-memory-usb-ttl-ch340g","title":"Arduino Mega + WiFi R3 Atmega2560 + NodeMCU ESP8266 32Mb Memory USB-TTL CH340G","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cspan\u003eIt is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eMega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega is Full integration on one board Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb.\u003c\/p\u003e\n\u003cp\u003eAll of the modules can work together or separately. And everyone has their own pinout headers. The convenient solution for the development of new projects requiring\u003cspan\u003e \u003c\/span\u003eUno\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003eWiFi. Via USB you can update sketches and firmware for\u003cspan\u003e \u003c\/span\u003eATmega328\u003cspan\u003e \u003c\/span\u003eand for\u003cspan\u003e \u003c\/span\u003eESP8266.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is a customized version of the classic\u003cspan\u003e \u003c\/span\u003eARDUINO MEGA\u003cspan\u003e \u003c\/span\u003eR3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266\u003cspan\u003e \u003c\/span\u003eWi-Fi\u003cspan\u003e \u003c\/span\u003eIC, with 32 Mb (megabits) of flash memory, and\u003cspan\u003e \u003c\/span\u003eCH340G\u003cspan\u003e \u003c\/span\u003eUSB-TTL converter on a single board! All components can be set up to work together or independently.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor this onboard have the USB-serial converter CH340G. Use this board is very simple. The board has DIP-switch, to connect the modules. For example, to USB and ATmeg2560, USB and ESP8266, ATmega2560 and ESP8266.\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40374584180779,"sku":"","price":1229.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/megawifi.webp?v=1661768793"},{"product_id":"ch376s-usb-module-u-disk-read-write-module","title":"CH376S USB Module U Disk Read Write Module","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSupply Voltage: 5V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInternal curing CH376S chip FAT file system, file operations simple and fast\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSupport including USB thumb drives, USB hard drives, USB flash drives, and USB storage devices, USB card reader\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with CH372, host compatible with CH375\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCH376S is used as a file manage control chip, used to MCU system read\/write a file in USB Flash Drive or SD card. It supports USB-Device Mode and USB-HOST Mode. It also sets firmware of special communication protocol to deal with Mass-Storage devices, communication interface firmware of SD card, FAT16, FAT32, and FAT12 file system manage firmware in the inner. CH376S supports three communication interfaces: an 8-bit parallel, SPI interface or asynchronism serial interface.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4 id=\"pd_sub_title\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv id=\"pd_long\"\u003e\n\u003col\u003e\n\u003cli\u003eInternal curing CH376S chip FAT file system, file operations simple and fast\u003c\/li\u003e\n\u003cli\u003eSupport including USB thumb drives, USB hard drives, USB flash drives and USB storage devices, USB card reader\u003c\/li\u003e\n\u003cli\u003eSupport standard size SD card, HC-SD card, and compatible high capacity MMC, TF card\u003c\/li\u003e\n\u003cli\u003eSupports a variety of communication interfaces: 8-bit parallel, SPI interface, and asynchronous serial ports\u003c\/li\u003e\n\u003cli\u003eCompatibility: device is compatible with CH372, host compatible with CH375\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40389713756203,"sku":"","price":389.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/CH376SUSBModuleUDiskReadWriteModule.jpg?v=1662194158"},{"product_id":"data-logger-module-logging-shield-data-recorder-shield","title":"Data Logger Module Logging Recorder Shield V1.0 For Arduino UNO","description":"\u003col\u003e\n\u003cli\u003eSD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.\u003c\/li\u003e\n\u003cli\u003eReal-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.\u003c\/li\u003e\n\u003cli\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.\u003c\/li\u003e\n\u003cli\u003eThe onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.\u003c\/li\u003e\n\u003cli\u003eA dedicated and well-designed data logging shield for Arduino.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eData Logger Module Recorder Shield V1.0 For Arduino UNO,SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. \u003c\/span\u003e\u003cspan\u003eReal time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years. \u003c\/span\u003e\u003cspan\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors. \u003c\/span\u003e\u003cspan\u003eOnboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run. \u003c\/span\u003e\u003cspan\u003eWorks with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK\/Mega R3 or higher. ADK\/Mega R2 or lower are not supported\u003c\/span\u003e\u003c\/p\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40558263173163,"sku":"","price":249.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/SDcardinterfaceworkswithFAT16orFAT32formattedcards.3.3vlevelshiftercircuitrypreventsdamagetoyourSDcard..webp?v=1667814302"},{"product_id":"adafruit-assembled-data-logging-shield-for-arduino","title":"Adafruit Assembled Data Logging shield for Arduino","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eModel: Adafruit Assembled Data Logging shield\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSD card interface: FAT16 or FAT32\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOnboard regulator: 3.3 V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReal time clock (RTC) keeps the time going even when the Arduino is unplugged.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHere’s a handy Arduino shield: we’ve had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. This shield makes it easy to add a ‘hard disk’ with gigabytes of storage to your Arduino! Our latest version of this popular shield has all the features of the popular original, and is “R3” compatible so you can use it with just about any Arduino or compatible.\u003c\/p\u003e\n\u003cp\u003eYou can be up and running with it in less than 15 minutes – saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program. This tutorial will also show you how to use two free software programs to plot your data. The included RTC (Real Time Clock) can be used to timestamp all your data with the current\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications \u0026amp; Features:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSD card interface works with FAT16 or FAT32 formatted cards. Built-in 3.3v level shifter circuitry lets you read or write super fast and prevents damage to your SD card\u003c\/li\u003e\n\u003cli\u003eA real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The coin cell battery backup lasts for years\u003c\/li\u003e\n\u003cli\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly\u003c\/li\u003e\n\u003cli\u003ePrototyping area for soldering connectors, circuitry, or sensors.\u003c\/li\u003e\n\u003cli\u003eTwo configurable indicator LEDs\u003c\/li\u003e\n\u003cli\u003eThe onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run\u003c\/li\u003e\n\u003cli\u003eUses the “R3 layout” I2C and ICSP\/SPI ports so it is compatible with a wide variety of Arduinos and Arduino-compatibles\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":40558274871339,"sku":"","price":2099.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/products\/AdafruitAssembledDataLoggingshieldforArduino.jpg?v=1667814577"},{"product_id":"arduino-mega-2560-ch340-smd","title":"Arduino Mega ATMEGA2560-16U CH340 SMD","description":"\u003cp\u003e\u003cspan\u003eThe ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC- to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003ctable width=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eMicrocontroller\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003eATmega2560\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eOperating Voltage\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e5V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eInput Voltage (recommended)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e7-12V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eInput Voltage (limits)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e6-20V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eDigital I\/O Pins\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e54 (of which 14 provide PWM output)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eAnalog Input Pins\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e16\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eDC Current per I\/O Pin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e40 mA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eDC Current for 3.3V Pin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e50 mA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eFlash Memory\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e256 KB of which 8 KB used by the bootloader\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eSRAM\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e8 KB\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eEEPROM\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e4 KB\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eClock Speed\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e16 MHz\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eWeight of Arduino Mega 2560 Board\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e35.6g\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eWeight of Compatible USB Cable\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e18.2g\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"314\"\u003e\u003cspan\u003eLength of Compatible USB Cable\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"310\"\u003e\u003cspan\u003e31cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Indian Hobby Center","offers":[{"title":"Default Title","offer_id":40640736002091,"sku":"","price":1049.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/files\/43195-2.png?v=1770208516"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/6796\/1387\/collections\/Arduino_Shield.png?v=1723750155","url":"https:\/\/www.indianhobbycenter.com\/collections\/development-boards-arduino-shield-amp-accessories.oembed?page=3","provider":"Indian Hobby Center","version":"1.0","type":"link"}